ENGINE FAMILY SPECIFICATIONCONTINENTAL COMMON RAILEuro 5

1.6 TDI PCR 2.1, CAYC, CAYB Diesel Injector
Cross-Reference & Technical Specs

Authoritative technical specifications, verified Bosch part numbers, control valve stamping codes, nozzle spray orifices, and hold-down tightening torque for the 1.6 TDI PCR 2.1, CAYC, CAYB diesel engine family.

Primary OEMCONTINENTAL
Control ValveSee Product Detail
Nozzle CodeSee Product Detail
Peak Pressure1600 bar peak rail pressure
Hold-Down Torque25 N·m
01

All Verified Part Numbers for 1.6 TDI PCR 2.1, CAYC, CAYB

The following 1 common-rail injector assembly is calibrated for this engine family. Click the SKU to view individual test bench flow curves, sister cross-references, and vehicle applications.

Part Number (SKU)Primary OE ReferenceControl ValveNozzle Code
03L130755E, 03L130755AASee Product DetailSee Product Detail
02

Verified Vehicle Compatibility

Make / ManufacturerVehicle Model & PlatformEngine SpecificationModel Years
VolkswagenGolf VI1.6 TDI (CAYC)2009-2013
AudiA3 (8P1)1.6 TDI (CAYC)2009-2012
SkodaOctavia II1.6 TDI (CAYC)2009-2013
03

Installation, Tightening Torque & Re-torque Protocol

Strict torque compliance is mandatory on 1.6 TDI PCR 2.1, CAYC, CAYB common-rail cylinder heads. Over-torquing stretches the injector body or strips the head clamping threads, while under-torquing allows combustion blow-by past the copper sealing washer:

🔧 Recommended Assembly Torques:
  • Hold-down clamp bolt: 25 N·m (cold state). Always clean the cylinder head recess with an injector seat reamer.
  • High-pressure rail flare nut: 25-30 N·m using a dedicated 17 mm line wrench.
  • Return leak-off banjo bolt: 9-12 N·m with fresh copper washers on both sides of the banjo union.
⚠️ ECU IMA Coding Requirement:

After fitting replacement injectors on 1.6 TDI PCR 2.1, CAYC, CAYB, generate or program the cylinder-specific IMA calibration code into the engine ECU using an OEM-level scan tool (Bosch KTS, Renault CLIP, or VAG-COM) to prevent cylinder power imbalance and rough idle.

04

Technical Diagnostics FAQ for 1.6 TDI PCR 2.1, CAYC, CAYB

What DTC fault codes indicate a failing injector on 1.6 TDI PCR 2.1, CAYC, CAYB?

The most frequent fault codes are P0201 through P0204 (Injector Circuit Malfunction on Cylinders 1-4), P2146/P2149 (Injector Group Supply Voltage Error), and P0087 (Fuel Rail Pressure Low due to excessive internal leak-off). Measure solenoid coil resistance across the pins (0.5-1.5 Ω) and perform a graduated-bottle dynamic leak-back test to pinpoint the leaking cylinder.

Can sister SKUs within the 1.6 TDI PCR 2.1, CAYC, CAYB family be interchanged?

Not unless explicitly confirmed on the vehicle build plate. While sister SKUs share the same physical outer envelope and See Product Detail control valve, they differ in nozzle spray orifice angle and factory IMA flow calibration. Mixing sister SKUs on the same engine block can trigger rough idle, elevated exhaust gas temperatures (EGT), and MOT emissions failure.

Which specific Bosch injectors fit the 1.6 TDI PCR 2.1, CAYC, CAYB engine?

The verified genuine Bosch common-rail injectors engineered for the 1.6 TDI PCR 2.1, CAYC, CAYB engine family are: