ENGINE FAMILY SPECIFICATIONCONTINENTAL COMMON RAILEuro 4

2.0 HDi, DW10BTED4 Diesel Injector
Cross-Reference & Technical Specs

Authoritative technical specifications, verified Bosch part numbers, control valve stamping codes, nozzle spray orifices, and hold-down tightening torque for the 2.0 HDi, DW10BTED4 diesel engine family.

Primary OEMCONTINENTAL
Control ValveSee Product Detail
Nozzle CodeSee Product Detail
Peak Pressure1600 bar peak rail pressure
Hold-Down Torque4 N·m + 65°
01

All Verified Part Numbers for 2.0 HDi, DW10BTED4

The following 2 common-rail injector assemblies are calibrated for this engine family. Click any SKU to view individual test bench flow curves, sister cross-references, and vehicle applications.

Part Number (SKU)Primary OE ReferenceControl ValveNozzle Code
1980EESee Product DetailSee Product Detail
1980J4See Product Detail5WS40156-4Z
02

Verified Vehicle Compatibility

Make / ManufacturerVehicle Model & PlatformEngine SpecificationModel Years
Peugeot307 CC2.0 HDi (RHR)2005-2009
CitroenC4 Coupe2.0 HDi (RHR)2004-2010
Peugeot308 SW I2.0 HDi (RHR)2007-2012
CitroenC5 III2.0 HDi (RHR)2008-2015
03

Installation, Tightening Torque & Re-torque Protocol

Strict torque compliance is mandatory on 2.0 HDi, DW10BTED4 common-rail cylinder heads. Over-torquing stretches the injector body or strips the head clamping threads, while under-torquing allows combustion blow-by past the copper sealing washer:

🔧 Recommended Assembly Torques:
  • Hold-down clamp bolt: 4 N·m + 65° (cold state). Always clean the cylinder head recess with an injector seat reamer.
  • High-pressure rail flare nut: 25-30 N·m using a dedicated 17 mm line wrench.
  • Return leak-off banjo bolt: 9-12 N·m with fresh copper washers on both sides of the banjo union.
⚠️ ECU IMA Coding Requirement:

After fitting replacement injectors on 2.0 HDi, DW10BTED4, generate or program the cylinder-specific IMA calibration code into the engine ECU using an OEM-level scan tool (Bosch KTS, Renault CLIP, or VAG-COM) to prevent cylinder power imbalance and rough idle.

04

Technical Diagnostics FAQ for 2.0 HDi, DW10BTED4

What DTC fault codes indicate a failing injector on 2.0 HDi, DW10BTED4?

The most frequent fault codes are P0201 through P0204 (Injector Circuit Malfunction on Cylinders 1-4), P2146/P2149 (Injector Group Supply Voltage Error), and P0087 (Fuel Rail Pressure Low due to excessive internal leak-off). Measure solenoid coil resistance across the pins (0.5-1.5 Ω) and perform a graduated-bottle dynamic leak-back test to pinpoint the leaking cylinder.

Can sister SKUs within the 2.0 HDi, DW10BTED4 family be interchanged?

Not unless explicitly confirmed on the vehicle build plate. While sister SKUs share the same physical outer envelope and See Product Detail control valve, they differ in nozzle spray orifice angle and factory IMA flow calibration. Mixing sister SKUs on the same engine block can trigger rough idle, elevated exhaust gas temperatures (EGT), and MOT emissions failure.

Which specific Bosch injectors fit the 2.0 HDi, DW10BTED4 engine?

The verified genuine Bosch common-rail injectors engineered for the 2.0 HDi, DW10BTED4 engine family are: