ENGINE FAMILY SPECIFICATIONCONTINENTAL COMMON RAILEuro 4

2.7 HDi V6, DT17ED4, UHZ Diesel Injector
Cross-Reference & Technical Specs

Authoritative technical specifications, verified Bosch part numbers, control valve stamping codes, nozzle spray orifices, and hold-down tightening torque for the 2.7 HDi V6, DT17ED4, UHZ diesel engine family.

Primary OEMCONTINENTAL
Control ValveSee Product Detail
Nozzle CodeM1001P152
Peak Pressure1650 bar peak rail pressure
Hold-Down Torque10 N·m + 90°
01

All Verified Part Numbers for 2.7 HDi V6, DT17ED4, UHZ

The following 1 common-rail injector assembly is calibrated for this engine family. Click the SKU to view individual test bench flow curves, sister cross-references, and vehicle applications.

Part Number (SKU)Primary OE ReferenceControl ValveNozzle Code
1980X9, 1980EP, 9662002680See Product DetailM1001P152
02

Verified Vehicle Compatibility

Make / ManufacturerVehicle Model & PlatformEngine SpecificationModel Years
Peugeot407 Coupe2.7 HDi (UHZ)2005-2011
Peugeot6072.7 HDi 24V (UHZ)2004-2010
CitroenC6 (TD_)2.7 HDi (UHZ)2005-2011
03

Installation, Tightening Torque & Re-torque Protocol

Strict torque compliance is mandatory on 2.7 HDi V6, DT17ED4, UHZ common-rail cylinder heads. Over-torquing stretches the injector body or strips the head clamping threads, while under-torquing allows combustion blow-by past the copper sealing washer:

🔧 Recommended Assembly Torques:
  • Hold-down clamp bolt: 10 N·m + 90° (cold state). Always clean the cylinder head recess with an injector seat reamer.
  • High-pressure rail flare nut: 25-30 N·m using a dedicated 17 mm line wrench.
  • Return leak-off banjo bolt: 9-12 N·m with fresh copper washers on both sides of the banjo union.
⚠️ ECU IMA Coding Requirement:

After fitting replacement injectors on 2.7 HDi V6, DT17ED4, UHZ, generate or program the cylinder-specific IMA calibration code into the engine ECU using an OEM-level scan tool (Bosch KTS, Renault CLIP, or VAG-COM) to prevent cylinder power imbalance and rough idle.

04

Technical Diagnostics FAQ for 2.7 HDi V6, DT17ED4, UHZ

What DTC fault codes indicate a failing injector on 2.7 HDi V6, DT17ED4, UHZ?

The most frequent fault codes are P0201 through P0204 (Injector Circuit Malfunction on Cylinders 1-4), P2146/P2149 (Injector Group Supply Voltage Error), and P0087 (Fuel Rail Pressure Low due to excessive internal leak-off). Measure solenoid coil resistance across the pins (0.5-1.5 Ω) and perform a graduated-bottle dynamic leak-back test to pinpoint the leaking cylinder.

Can sister SKUs within the 2.7 HDi V6, DT17ED4, UHZ family be interchanged?

Not unless explicitly confirmed on the vehicle build plate. While sister SKUs share the same physical outer envelope and See Product Detail control valve, they differ in nozzle spray orifice angle and factory IMA flow calibration. Mixing sister SKUs on the same engine block can trigger rough idle, elevated exhaust gas temperatures (EGT), and MOT emissions failure.

Which specific Bosch injectors fit the 2.7 HDi V6, DT17ED4, UHZ engine?

The verified genuine Bosch common-rail injectors engineered for the 2.7 HDi V6, DT17ED4, UHZ engine family are: