ENGINE FAMILY SPECIFICATIONBOSCH COMMON RAILEuro 3

Cummins ISBe / ISB / QSB 3.9L & 5.9L (Iveco NEF Tector) Diesel Injector
Cross-Reference & Technical Specs

Authoritative technical specifications, verified Bosch part numbers, control valve stamping codes, nozzle spray orifices, and hold-down tightening torque for the Cummins ISBe / ISB / QSB 3.9L diesel engine family.

Primary OEMBOSCH
Control ValveF00RJ00339
Nozzle CodeDSLA143P970
Peak Pressure1600 bar peak rail pressure
Hold-Down Torque30 N·m
01

All Verified Part Numbers for Cummins ISBe / ISB / QSB 3.9L & 5.9L (Iveco NEF Tector)

The following 5 common-rail injector assemblies are calibrated for this engine family. Click any SKU to view individual test bench flow curves, sister cross-references, and vehicle applications.

Part Number (SKU)Primary OE ReferenceControl ValveNozzle Code
1405332, 1407306, 1409652F00RJ00339DSLA143P970
5263316, 3916991, 4940051F00RJ02130DSLA124P5516
504091504, 0000504091504, 2855491F00RJ01278DLLA143P1536
5255184, 5263307, 2830957F00RJ02130DSLA143P5501
5263307, 5255184, 2830957F00RJ02130DSLA143P5540
02

Verified Vehicle Compatibility

Make / ManufacturerVehicle Model & PlatformEngine SpecificationModel Years
IvecoEurocargoISBe / ISB / QSB2000-2008
DAFLF45 / LF55 / CF65ISBe / ISB / QSB2001-2008
FordCargo Commercial TruckISBe / ISB / QSB2005-2014
AgraleMA / MTISBe / ISB / QSB2005-2009
DodgeRam 2500 5.9 ISB PickupISBe / ISB / QSB2002-2009
DodgeRam 3500ISBe / ISB / QSB2002-2009
CumminsB Series ISB (B5.9) - Industrial / MarineISBe / ISB / QSB2002-2009
CaseMaxxum / MXU / PumaISBe / ISB / QSB2006-2015
New HollandT6000 / T7000 / TS-AISBe / ISB / QSB2006-2015
DAFLF 45 / LF 55 / CF 65ISBe / ISB / QSB2001-2008
FordCargo / F-250ISBe / ISB / QSB2005-2012
VolkswagenConstellation / Worker / DeliveryISBe / ISB / QSB2003-2012
DAFLF 45 / LF 55ISBe / ISB / QSB2005-2012
VolkswagenWorker / Constellation / DeliveryISBe / ISB / QSB2005-2012
IvecoEuroCargo Tector Medium CommercialISBe / ISB / QSB2005-2012
03

Installation, Tightening Torque & Re-torque Protocol

Strict torque compliance is mandatory on Cummins ISBe / ISB / QSB 3.9L & 5.9L (Iveco NEF Tector) common-rail cylinder heads. Over-torquing stretches the injector body or strips the head clamping threads, while under-torquing allows combustion blow-by past the copper sealing washer:

🔧 Recommended Assembly Torques:
  • Hold-down clamp bolt: 30 N·m (cold state). Always clean the cylinder head recess with an injector seat reamer.
  • High-pressure rail flare nut: 25-30 N·m using a dedicated 17 mm line wrench.
  • Return leak-off banjo bolt: 9-12 N·m with fresh copper washers on both sides of the banjo union.
⚠️ ECU IMA Coding Requirement:

After fitting replacement injectors on Cummins ISBe / ISB / QSB 3.9L & 5.9L (Iveco NEF Tector), generate or program the cylinder-specific IMA calibration code into the engine ECU using an OEM-level scan tool (Bosch KTS, Renault CLIP, or VAG-COM) to prevent cylinder power imbalance and rough idle.

04

Technical Diagnostics FAQ for Cummins ISBe / ISB / QSB 3.9L & 5.9L (Iveco NEF Tector)

What DTC fault codes indicate a failing injector on Cummins ISBe / ISB / QSB 3.9L & 5.9L (Iveco NEF Tector)?

The most frequent fault codes are P0201 through P0204 (Injector Circuit Malfunction on Cylinders 1-4), P2146/P2149 (Injector Group Supply Voltage Error), and P0087 (Fuel Rail Pressure Low due to excessive internal leak-off). Measure solenoid coil resistance across the pins (0.5-1.5 Ω) and perform a graduated-bottle dynamic leak-back test to pinpoint the leaking cylinder.

Can sister SKUs within the Cummins ISBe / ISB / QSB 3.9L & 5.9L (Iveco NEF Tector) family be interchanged?

Not unless explicitly confirmed on the vehicle build plate. While sister SKUs share the same physical outer envelope and F00RJ00339 control valve, they differ in nozzle spray orifice angle and factory IMA flow calibration. Mixing sister SKUs on the same engine block can trigger rough idle, elevated exhaust gas temperatures (EGT), and MOT emissions failure.

Which specific Bosch injectors fit the Cummins ISBe / ISB / QSB 3.9L & 5.9L (Iveco NEF Tector) engine?

The verified genuine Bosch common-rail injectors engineered for the Cummins ISBe / ISB / QSB 3.9L & 5.9L (Iveco NEF Tector) engine family are:

  • Bosch 0445120007 Common Rail Injector → (OE: 1405332, 1407306, 1409652, 2830221, 2830224, 2830957, 3230159500, 4896444, 4897271, BG5X9E526AA, 2R0198133, 2830244, 2R0130201A) — Control Valve: F00RJ00339, Nozzle Code: DSLA143P970
  • Bosch 0445120238 Common Rail Injector → (OE: 5263316, 3916991, 4940051, 3968158, 5254688, 5135790AB, 5135790AC, 5135790AD, 5135790AE, 5135790AF, R4429991, R5135790AB, R5135790AC, R5135790AD, R5135790AE, R5135790AF) — Control Valve: F00RJ02130, Nozzle Code: DSLA124P5516
  • Bosch 0445120054 Common Rail Injector → (OE: 504091504, 0000504091504, 2855491, 2855491R) — Control Valve: F00RJ01278, Nozzle Code: DLLA143P1536
  • Bosch 0445120212 Common Rail Injector → (OE: 5255184, 5263307, 2830957, 2830221, 2830224, 4896444, 4897271, 1405332, 1407306, 1409652, BG9X9K526BA, 2R0198133, 2R0130201A, 3230159500) — Control Valve: F00RJ02130, Nozzle Code: DSLA143P5501
  • Bosch 0445120273 Common Rail Injector → (OE: 5263307, 5255184, 2830957, 2830244, 2830224, 2830221, 4897271, 4896444, 1405332, 1407306, 1409652, BG9X9K526BA, BG5X9E526AA, 2R0198133, 2R0130201A, 3230159500) — Control Valve: F00RJ02130, Nozzle Code: DSLA143P5540