BOSCH 07K906036G
High Pressure Fuel Injector Audi RS3 TT RS RS Q3 2.5 TFSI EA855 EVO 0261500407
07K906036C, 0261500407HIGH-FLOW HIGH-SPEED SOLENOID ACTUATOR-250 bar peak rail pressureProduct Overview
The Bosch 07K906036G (Bosch 0261500407) is a Bosch HDEV6 high-performance direct gasoline injector for Audi 2.5L TFSI five-cylinder turbo engines (EA855, EA855 EVO, DAZA, DNWA). It is listed for the Audi RS3 8V / 8Y (2017-2024), TT 8S (2017-2023) and RS Q3 F3 (2019-2024). Maximum rail pressure is 250 bar (25 MPa / 3625 psi), with a high-flow laser-calibrated spray pattern for high-boost five-cylinder applications and coil resistance of 1.5-1.9 Ω at 20°C. Holding bracket hex fasteners are specified at 10 N·m and the high-pressure pipe flare nut at 27 N·m. Common codes are P0300, P0301-P0305 and P0172. Teflon combustion seals must be replaced and compression-calibrated before insertion.
Always verify the OE reference 07K906036C stamped on your existing injector body before ordering; confirm the engine code and injector part number on the unit body both match your vehicle before unsealing the packaging. 07K906036G needs no ECU calibration coding; no code transfer is required after fitting.
Technical Specifications
| Specification | Value |
|---|---|
| System Type | Bosch HDEV6 High-Performance Direct Gasoline Fuel Injector |
| Operating PressureCore Spec | |
| Spray Pattern | High-flow laser-calibrated spray pattern for high-boost 5-cylinder applications |
| Fuel Rail Bolt Torque | 10 N·m (holding bracket hex fasteners) |
| High Pressure Pipe Torque | 27 N·m Flare Nut Connection |
| Coil Resistance | 1.5 - 1.9 Ω at 20°C (High performance peak-and-hold drive) |
| Common Fault Codes | P0300 (Random Misfire), P0301-P0305 (5-Cylinder Misfire), P0172 (Fuel System Rich Bank 1) |
| Workshop Precaution | Mandatory Teflon combustion seal replacement and compression calibration prior to insertion |
Installation Tips
- Depressurize Fuel Rail & Remove Upper Charge Air Piping: Depressurize high pressure fuel injection system via VCDS/ODIS or fuse removal. Remove carbon intake charge pipes to access fuel rail.
- Disconnect Injector Harness & High Pressure Steel Rail Pipe: Unplug electrical connectors from the 5 injectors. Loosen the high pressure steel fuel rail line (27 N·m) and unbolt fuel rail mounting bolts (10 N·m).
- Extract Injectors & Fit New Teflon Chamber Seals: Carefully remove injectors with puller tool T10133. Fit new Teflon combustion chamber seals using the installation cone and compression sleeve.
- Torque Rail Fasteners & Verify High Pressure Seal Integrity: Press injectors into cylinder head ports. Tighten rail bolts to 10 N·m. Torque steel high pressure line to 27 N·m. Prime fuel system and check for zero leaks.
- Confirm fitment by VIN/EPC before ordering.
- Tighten the injector hold-down to 10 N·m.
- Tighten the high-pressure line to 27 N·m.
Frequently Asked Questions
Will this injector fit my Audi RS3, TT, or RS Q3?
It is listed for Audi RS3 (8V/8Y) DAZA/DNWA 2017-2024, Audi TT (8S) DAZA/DNWA 2017-2023, and Audi RS Q3 F3 2.5 TFSI DNWA 294kW 2019-2024. It is for the Audi 2.5L TFSI 5-cylinder turbo engine family EA855, EA855 EVO, DAZA, and DNWA. Confirm fitment by VIN/EPC before ordering.
What fault codes are listed for checking this injector?
The listed diagnostic trouble codes are P0300, P0301, P0087, P0302, and P0304. If these are present, confirm the diagnosis and part fitment against the vehicle EPC.
What are the injector mounting and high-pressure line torque values?
The mounting/hold-down torque is 10 N·m, and the high-pressure line torque is 27 N·m. The system pressure is 250 bar. Use these values for this gasoline direct-injection injector.
How can I verify the old injector before replacing it?
Check the old part number against 07K906036G and the listed cross references: 07K906036G, 07K906036C, 0261500407, 06H906036G, 06M906036AD, and 06M906036P. Confirm the engine family and vehicle fitment against the EPC before ordering. If the marking is not clear or not listed, confirm against the vehicle EPC.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.