Bosch 0445110515
Injector Fiat Opel 1.3 CDTI MultiJet
55219886, 55235245, 55268037, 95517513, 55577626, 95514660, 95514661, 95521448, 1723813, BS51-9F593-AAF00VC01359DLLA143P23641600 bar peak rail pressureProduct Overview
The Bosch 0445110515 (Fiat OE 55219886, 55235245, 55268037, Opel / GM 95517513, 55577626, Ford 1723813, and Bosch remanufactured exchange reference 0986435212) is an electro-hydraulic solenoid common rail diesel injector designed for the Fiat 1.3 MultiJet II (SDE) and Opel / Vauxhall 1.3 CDTI ecoFLEX 16-valve turbocharged passenger car engines. Engineered for operating system rail pressures up to 1,600 bar (23,200 psi), this injector is fitted across millions of European compact city cars and subcompact hatchbacks, delivering Euro 5 emissions compliance through multi-stage pilot and post-injection strategies.
Always verify the OE reference 55219886, 55235245, 55268037, 95517513 stamped on your existing injector body before ordering; confirm the engine code and injector part number on the unit body both match your vehicle before unsealing the packaging. 0445110515 needs its calibration code transferred after fitting; read the code from the new unit and program it with a compatible diagnostic tool.
Vehicle & Engine Fitment
| Vehicle | Engine | Years |
|---|---|---|
| Fiat 500 / 500C / 500L | Fiat SDE 1.3 MultiJet / Opel 1.3 CDTI / Ford 1.3 TDCi | 2009-2019 |
| Opel Corsa D/E | Fiat SDE 1.3 MultiJet / Opel 1.3 CDTI / Ford 1.3 TDCi | 2010-2019 |
| Fiat Punto / Punto Evo | Fiat SDE 1.3 MultiJet / Opel 1.3 CDTI / Ford 1.3 TDCi | 2009-2018 |
| Alfa Romeo MiTo 1.3 JTDM | Fiat SDE 1.3 MultiJet / Opel 1.3 CDTI / Ford 1.3 TDCi | 2009-2018 |
Technical Specifications
| Specification | Value |
|---|---|
| Copper sealing washer | F00VC17503 |
Installation Tips
- Clean The Injector Bore: Carefully scrape and vacuum all carbon deposits from the injector bore and cylinder head seat.
- Install A New Sealing Washer: Fit a brand-new copper sealing washer (Fiat 71738018, 1.5 mm); the matching Bosch washer is listed in the seal ring kit specification.
- Lubricate The Injector Body: Lightly coat the injector body, not the nozzle tip, with high-temperature ceramic grease.
- Seat The Injector: Lower the injector into the cylinder head and position the hold-down clamp squarely.
- Fit A New Stretch Bolt: Install a new M6 stretch bolt (Opel 55577627 / Fiat 55219888); never reuse the old clamp bolt.
- Stage 1 Hold-Down Torque: Torque the clamp bolt to 9 N·m in a smooth single motion.
- Stage 2 Hold-Down Angle: Turn the clamp bolt an additional 90° (quarter turn).
- Reconnect The High-Pressure Pipe: Hand-start the high-pressure pipe flare nuts, then torque them to 25 N·m.
- Clean the injector seat and fuel line connections carefully, then confirm sealing and torque values against the vehicle's workshop data.
- Before fitting 0445110515, verify the engine code and vehicle application against the EPC to avoid a wrong replacement.
- After installation, run the vehicle's specified diagnostic and adaptation routine if the workshop manual requires it.
Frequently Asked Questions
Will this injector fit my vehicle?
It is listed for the Fiat, Opel, and Alfa Romeo applications shown above. Confirm your engine code and vehicle details against the EPC or workshop manual before ordering 0445110515.
What symptoms suggest this common-rail diesel injector has failed?
The listing does not specify failure symptoms. Use the vehicle's workshop diagnostics and fault-code data to confirm the fault before ordering 0445110515; check fitment against the EPC or workshop manual.
What should I check before ordering this injector?
Confirm the engine code, vehicle application, and that 0445110515 matches the EPC or workshop manual. Inspect the fuel system and existing injector faults first, since coding and seal reuse are not stated here.
Does the replacement injector need to be coded or adapted?
Coding and adaptation requirements are not stated in the listing. Confirm them against the vehicle's EPC or workshop manual before fitting 0445110515, and follow the specified diagnostic procedure.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.