BOSCH 0445120027
Common Rail Injector for Hitachi ZX200 3 ZX240 3 Isuzu 4HK1 6HK1 5.2L 7.8L
8-97603415-4, 8-97603415-0, 8-97603415-1, 8-97603415-2, 8-97603415-3, 8-97603415-5, 8-97603415-6, 8-97603415-7, 8-97603415-8, 4652265, J6600, 87310574F00RJ01159DLLA158P13851600 bar peak rail pressureProduct Overview
The Bosch 0445120027 is an authentic Tier-1 commercial common rail diesel fuel injector engineered for heavy-duty earthmoving and construction machinery. Operating within the Bosch CRIN2-16 platform, this unit delivers high-precision multi-injection fuel delivery at peak rail pressures up to 1,600 bar (23,200 psi) to meet strict Tier 3 / Stage IIIA off-highway emissions standards. This injector is factory standard equipment on Hitachi Zaxis ZX200-3, ZX240-3, ZX270-3, and ZX330-3 series hydraulic excavators, as well as JCB JS200 through JS360, Case CX210B / CX240B, and Sumitomo SH200-5 excavators powered by Isuzu 4HK1 (5.2L, 4-cylinder) and Isuzu 6HK1 (7.8L, 6-cylinder) turbocharged direct-injection common rail engines.
Always verify the OE reference 8976034154, 8976034150, 8976034151, 8976034152 stamped on your existing injector body before ordering; confirm the engine code and injector part number on the unit body both match your vehicle before unsealing the packaging. 0445120027 needs no ECU calibration coding; no code transfer is required after fitting.
Vehicle & Engine Fitment
| Vehicle | Engine | Years |
|---|---|---|
| Hitachi Zaxis ZX200-3 / ZX200LC-3 | Isuzu 4HK1 (5.2L) & 6HK1 (7.8L) Electronic Common Rail | 2006-2014 |
| Hitachi Zaxis ZX240-3 / ZX250-3 | Isuzu 4HK1 (5.2L) & 6HK1 (7.8L) Electronic Common Rail | 2006-2015 |
| Hitachi Zaxis ZX270 / ZX330 / ZX350 (Gen. 3) | Isuzu 4HK1 (5.2L) & 6HK1 (7.8L) Electronic Common Rail | 2006-2015 |
| JCB JS200 / JS210 / JS220 / JS240 | Isuzu 4HK1 (5.2L) & 6HK1 (7.8L) Electronic Common Rail | 2007-2016 |
| Case CX210B / CX240B | Isuzu 4HK1 (5.2L) & 6HK1 (7.8L) Electronic Common Rail | 2007-2015 |
Technical Specifications
| Specification | Value |
|---|---|
| Fuel System | Bosch Common Rail (CRIN2-16) |
| Peak Pressure | 1600 bar |
| Control ValveCore Spec | 🔗 Shared Valve (2 assemblies):0445120044 |
| Nozzle CodeCore Spec | |
| Nozzle Part NumberCore Spec | |
| Magnet Assembly | F00RJ02701 |
| Seal Ring Kit | F00RJ02176 |
| Connector Tube Pre-Torque | 15 N·m |
| Hold-down Clamp Torque | 26-30 N·m📐 Torque & Angle Wizard → |
| Connector Tube Final Torque | 50-55 N·m |
| High Pressure Line Torque | 30-35 N·m |
| Coding Standard | Coding Not Required (CRIN2 Generation) |
| Operating PressureCore Spec |
Installation Tips
- Injector Bore Preparation: Inspect the copper washer seat using an inspection bore light. Clean all pyrolyzed carbon using a guided seat reamer and insert a dummy blanking plug to prevent carbon grit from falling into the combustion chamber ( Stuck Injector Removal & Carbon Cleaning SOP ).
- Install New Annealed Copper Washer: Fit a genuine 1.50mm annealed copper sealing washer. Never apply grease or anti-seize paste to the washer or nozzle tip.
- Insert Injector & Align Feed Pipe: Lower the injector into the bore and install the hold-down clamp with a new single-use stretch bolt. Finger-tighten the clamp bolt.
- Pre-Torque Feed Pipe Nut (Step 1): Hand-thread the side feed pipe collar nut into the cylinder head, then pre-torque to 15 N·m (11 lb-ft). This forces the injector body to self-align concentric with the feed tube spherical nose.
- Tighten Hold-Down Clamp (Step 2): Torque the injector clamp bolt to 26–30 N·m (19–22 lb-ft).
- Final Torque Feed Pipe Nut (Step 3): Using a 19mm crowfoot wrench with torque offset compensation, tighten the feed pipe nut to 50–55 N·m (37–41 lb-ft).
- Leak-Off Line Banjo: Install the return fuel manifold with new copper crush washers and torque the banjo bolts to 15–18 N·m.
- Torque the mounting/hold-down fasteners to 26-30 N·m.
- Torque the high-pressure line to 30-35 N·m.
- Verify part number 0445120027 and the listed cross references against the vehicle’s EPC before fitting.
Frequently Asked Questions
What engines and machines does part 0445120027 fit?
It is a common-rail diesel injector for the Isuzu 4HK1 (5.2L) and 6HK1 (7.8L) Electronic Common Rail engine family. Listed fitment includes Hitachi Zaxis ZX200-3/ZX200LC-3 (2006-2014), ZX240-3/ZX250-3 (2006-2015), ZX270/ZX330/ZX350 Gen. 3 (2006-2015), JCB JS200/JS210/JS220/JS240 (2007-2016), and Case CX210B/CX240B (2007-2015). Confirm the exact machine/year against the vehicle’s EPC before ordering.
What diagnostic trouble codes are listed, and what symptoms should I expect?
The listed DTCs are P0300, P0301, P0087, P0302, and P0304. The verified facts do not describe specific symptoms, so use these codes as diagnostic references and confirm the actual fault before replacing the injector.
Does this injector need coding/adaptation, and can I reuse the seals?
Coding/adaptation and seal-reuse requirements are not stated in the verified facts. Confirm them against the vehicle’s EPC instead of guessing.
What are the torque values and cross references for this injector?
Mounting/hold-down torque is 26-30 N·m, high-pressure line torque is 30-35 N·m, and system pressure is 1600 bar. Cross references are 0445120027, 8976034154, 8976034150, 8976034151, 8976034152, and 8976034153. Verify the old unit’s number against these references and the vehicle’s EPC.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.