Continental VDO A2C59511365
Piezo Common Rail Injector
LR008837, 4H2Q-9K546-AF--1650 bar peak rail pressureProduct Overview
The Continental Siemens VDO A2C59511365 is an authentic piezoelectric common rail diesel injector calibrated for Land Rover Discovery 3 and 2.7 TDV6 engine platforms. Operating at an engineered rail pressure of 1650 bar, this piezo assembly features ultra-fast crystal actuation and precision multi-hole injection. Mandatory ECU calibration requires programming the 6-hex IIC calibration code into the engine control unit.
Verify VDO 6-Hex IIC calibration code and OEM cross reference before installation.
Vehicle & Engine Fitment
| Vehicle | Engine | Years |
|---|---|---|
| Land Rover Discovery 3 | 2.7 TDV6 (276DT) | 2007-2009 |
Technical Specifications
| Specification | Value |
|---|---|
| SKU | A2C59511365 |
| Brand | CONTINENTAL |
| Fuel System | Continental / VDO Common Rail |
| Operating PressureCore Spec | |
| Hold Down Torque | 10 N·m + 90° |
| High-Pressure Line Torque | 30 N·m |
| Coding Required | VDO 6-Hex IIC |
| Emission Standard | Euro 4 |
| Injector Type | Piezoelectric |
Installation Tips
- Depressurize And Isolate: Depressurize the fuel system and isolate it from all energy sources before opening any high-pressure connection; wait until the system is fully depressurized and secure the work area against accidental start-up.
- Clean And Disconnect: Clean the surrounding area of the cylinder head and injector bore before work, then disconnect the electrical connector and the spill/leak-off connections from the injector; keep removed connections clean and protected.
- Remove High-Pressure Line: Remove the high-pressure line from the injector and cap or protect the line and injector ports immediately to prevent dirt ingress; do not bend or stress the line during removal.
- Extract Old Injector: Release the hold-down and extract the old unit without twisting it; keep the piezo injector straight because it is bending-sensitive, and check the injector seat before fitting the replacement, following the manufacturer's service information for any additional sealing or damping components.
- Clean Bore And Fit Seals: Clean the injector bore and seat carefully, remove all residue without damaging sealing surfaces, fit new seals, and seat the unit straight in the bore, following the manufacturer's service information for component orientation.
- Tighten Hold-Down And Reconnect Line: Tighten the hold-down to 10 N·m, then rotate a further 90°, then reconnect the high-pressure line to the injector and tighten the line fitting to 30 N·m; keep the line aligned and free from side load.
- Calibration Coding: Record the VDO 6-Hex IIC calibration code and program it with a compatible diagnostic tool.
- Leak-Check And Start-Up: After coding, run the engine through a leak-check procedure and inspect all high-pressure connections and the injector seat for leaks; correct any leak before start-up, then start the engine and confirm smooth operation.
- Verify part number A2C59511365 and cross references 5WS40249, LR008837, and 4H2Q-9K546-AF before fitting.
- Confirm fitment for Land Rover Discovery 3 2.7 TDV6 (276DT) (2007-2009) against the vehicle's EPC.
- Tighten the mounting/hold-down to 10 N·m plus 90° and the high-pressure line to 30 N·m.
Frequently Asked Questions
Will this common-rail diesel injector fit my vehicle?
It is listed for Land Rover Discovery 3 2.7 TDV6 (276DT) (2007-2009) with engine family 2.7 TDV6, 276DT. Confirm fitment against the vehicle's EPC before ordering.
How can I verify the old part before replacement?
Check the part number A2C59511365 and cross references 5WS40249, LR008837, and 4H2Q-9K546-AF against the old unit. If they do not match, confirm fitment against the vehicle's EPC before proceeding.
What pressure and torque specifications apply?
The listed system pressure is 1650 bar; mounting/hold-down torque is 10 N·m + 90°, and high-pressure line torque is 30 N·m. Confirm any other installation specifications against the vehicle's EPC.
What DTCs are listed, and does this injector require coding or adaptation?
The listed diagnostic trouble codes are P0300, P0087, P0201, P0204, and P0202. Coding/adaptation requirements are not stated in these facts and must be confirmed against the vehicle's EPC.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.