Catalog / CONTINENTAL / A2C59511602
CONTINENTAL

Continental VDO A2C59511602

View Specs
SolenoidContinental / VDO Common RailEuro 4

High Pressure Fuel Pump

Reference data for CONTINENTAL A2C59511602 high-pressure fuel pump · OEM 1445932, 4M5Q-9B395-AD, 1541974 · Application 1.8 TDCi Lynx, KKDA
OE REFERENCE1445932, 4M5Q-9B395-AD, 1541974
CONTROL VALVE-
NOZZLE-
EMISSIONEuro 4
WARRANTY12 Months
01

Product Overview

Continental VDO A2C59511602 is an authentic high-pressure common rail diesel injection supply pump engineered for Ford Focus II and 1.8 TDCi Lynx applications. Operating at up to 1600 bar under Euro 4 emission control, this precision unit incorporates electronic volume control (VCV) and pressure control (PCV) valves for accurate rail pressure regulation.

Before You Order

Verify VCV/PCV valve connections and high pressure line torque before installation.

Technical references: OEM service documentation, manufacturer catalogs, and field repair data.
02

Compatible Injectors

OEM Ref
03

Vehicle & Engine Fitment

VehicleEngineYears
Ford Focus II1.8 TDCi (KKDA)2005-2012
Ford C-Max1.8 TDCi (KKDA)2007-2010
04

Technical Specifications

SpecificationValue
SKUA2C59511602
BrandCONTINENTAL
Fuel SystemContinental / VDO Common Rail
Operating PressureCore Spec
Hold Down Torque22 N·m
High-Pressure Line Torque50 N·m (Sprocket) / 22 N·m (Flange)
Emission StandardEuro 4
System TypeHigh Pressure Fuel Pump
05

Installation Tips

  1. Depressurize And Isolate: Depressurize the high-pressure fuel system according to the service data, isolate the battery and fuel supply, and place a suitable container for spillage before beginning work.
  2. Clean Surrounding Area: Clean the pump mounting area, the high-pressure line connections, the low-pressure connections and the surrounding area of the cylinder head before loosening any fastener, then dry with lint-free material and keep all openings capped.
  3. Disconnect Connections: Disconnect the electrical connector, the spill connection and the low-pressure connections, then cap all open ports and protect the surrounding area from fuel spillage.
  4. Remove High-Pressure Line: Remove the high-pressure delivery line from the pump outlet, cap all open ports immediately, and discard the sealing washers if fitted; do not reuse the line if it is deformed or damaged.
  5. Extract Old Unit: Remove the drive coupling or sprocket, remove the pump flange fasteners, extract the old unit from its mounting bore, clean the bore and seat in the cylinder head, inspect the drive contact (roller follower, tappet or coupling as fitted) for wear or damage, and fit new seals to the pump flange.
  6. Seat And Tighten Unit: Seat the unit squarely in the bore, engage the drive coupling or sprocket, fit the hold-down and flange fasteners, tighten the pump flange fasteners to 22 N·m, and tighten the refitted drive coupling or sprocket to 50 N·m.
  7. Leak-Check And Start-Up: Reconnect the high-pressure delivery line and tighten the line to the torque specified in the service data, reconnect the low-pressure connections and electrical connector, then start the engine, check for leaks at the pump, lines and connections, and rectify any leak before returning the system to service.
Tips & Warnings:
  • Confirm part number A2C59511602 and cross references 5WS40020, 5WS40020-Z, 1445932, 4M5Q-9B395-AD and 1541974 before fitting.
  • Torque the mounting/hold-down to 22 N·m and the high-pressure line to 50 N·m (Sprocket) / 22 N·m (Flange).
  • Scan for DTCs P0087, P0089, P0191, P0088 and P0093 and confirm any unknown procedures against the vehicle’s EPC.
06

Frequently Asked Questions

QWill this pump fit my Ford Focus II 1.8 TDCi KKDA or C-Max 1.8 TDCi KKDA?

The part is A2C59511602, a high-pressure common-rail fuel pump, cross-referenced to 5WS40020, 5WS40020-Z, 1445932, 4M5Q-9B395-AD and 1541974. Listed fitment is Ford Focus II 1.8 TDCi (KKDA) 2005-2012 and Ford C-Max 1.8 TDCi (KKDA) 2007-2010, using the 1.8 TDCi Lynx KKDA engine family. Confirm your vehicle details against the EPC before ordering.

QWhat mounting and high-pressure line torques should I use for A2C59511602?

The mounting/hold-down torque is 22 N·m. The high-pressure line torque is 50 N·m (Sprocket) and 22 N·m (Flange), and the system pressure is 1600 bar.

QWhich diagnostic trouble codes should I check for this high-pressure common-rail fuel pump?

The listed diagnostic trouble codes are P0087, P0089, P0191, P0088 and P0093. Use these as scan-tool checks and confirm any further diagnosis against the vehicle’s EPC.

QDo I need coding/adaptation, can I reuse the seals, and what service life should I expect?

The verified facts do not state coding/adaptation requirements, seal reuse, or expected service life for A2C59511602. Confirm these points against the vehicle’s EPC before installation.

07

Diagnostic Trouble Codes & Fault Protocols

Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:

P0087Critical

Fuel Rail/System Pressure Too Low

P0088High

Fuel Rail/System Pressure Too High

P0089High

Fuel Pressure Regulator 1 Performance

P0093High

Fuel System Leak Detected - Large Leak

P0191High

Fuel Rail Pressure Sensor 'A' Circuit Range/Performance

Technical Diagnostic & Service Protocols

Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.

COMMON RAIL WORKSHOP DIAGNOSTICS

Common Rail High-Pressure Pump Diagnostics Guide

Diagnose common rail high-pressure pump failure: suction vacuum, CP4 roller glitter, plunger wear, air ingress & P0087 hard start. Workshop bench testing.

Read Technical Protocol
COMMON RAIL WORKSHOP DIAGNOSTICS

Fuel Metering Valve (IMV/SCV) Diagnostics Guide

Diagnostic guide for common rail fuel metering valves (IMV/SCV/FCA/MPROP). Normally open vs closed, coil resistance, PWM duty cycle & P0088 / P0089 test.

Read Technical Protocol
OBD-II DIAGNOSTIC PROTOCOL

P0087 Low Rail Pressure Diagnosis Guide

Step-by-step workshop diagnostic protocol for OBD-II DTC P0087 (Fuel Rail Pressure Too Low). 5-stage troubleshooting tree: backleak testing, SCV valve, PRV valve, and high-pressure pump.

Read Technical Protocol
COMMON RAIL WORKSHOP DIAGNOSTICS

Rail Pressure Relief Valve Diagnostics Guide

Common rail pressure relief valve (PRV) testing guide. Diagnose hot start stalls, P0087 rail pressure loss, return line leakage & single vs 2-stage valves.

Read Technical Protocol