Continental VDO A2C59513481
High Pressure Fuel Pump
167000938R, 16700-00Q1K--1600 bar peak rail pressureProduct Overview
Continental VDO A2C59513481 is an authentic high-pressure common rail diesel injection supply pump engineered for Renault Megane III and 1.5 dCi Euro 5 applications. Operating at up to 1600 bar under Euro 5 emission control, this precision unit incorporates electronic volume control (VCV) and pressure control (PCV) valves for accurate rail pressure regulation.
Verify VCV/PCV valve connections and high pressure line torque before installation.
Technical Specifications
| Specification | Value |
|---|---|
| SKU | A2C59513481 |
| Brand | CONTINENTAL |
| Fuel System | Continental / VDO Common Rail |
| Operating PressureCore Spec | |
| Hold Down Torque | 22 N·m |
| High-Pressure Line Torque | 50 N·m (Sprocket) / 22 N·m (Flange) |
| Emission Standard | Euro 5 |
| System Type | High Pressure Fuel Pump |
Installation Tips
- Depressurize And Isolate: Depressurize the high-pressure fuel system according to the service data, isolate the battery and fuel supply, and place a suitable container for spillage before beginning work.
- Clean Surrounding Area: Clean the pump mounting area, the high-pressure line connections, the low-pressure connections and the surrounding area of the cylinder head before loosening any fastener, then dry with lint-free material and keep all openings capped.
- Disconnect Connections: Disconnect the electrical connector, the spill connection and the low-pressure connections, then cap all open ports and protect the surrounding area from fuel spillage.
- Remove High-Pressure Line: Remove the high-pressure delivery line from the pump outlet, cap all open ports immediately, and discard the sealing washers if fitted; do not reuse the line if it is deformed or damaged.
- Extract Old Unit: Remove the drive coupling or sprocket, remove the pump flange fasteners, extract the old unit from its mounting bore, clean the bore and seat in the cylinder head, inspect the drive contact (roller follower, tappet or coupling as fitted) for wear or damage, and fit new seals to the pump flange.
- Seat And Tighten Unit: Seat the unit squarely in the bore, engage the drive coupling or sprocket, fit the hold-down and flange fasteners, tighten the pump flange fasteners to 22 N·m, and tighten the refitted drive coupling or sprocket to 50 N·m.
- Leak-Check And Start-Up: Reconnect the high-pressure delivery line and tighten the line to the torque specified in the service data, reconnect the low-pressure connections and electrical connector, then start the engine, check for leaks at the pump, lines and connections, and rectify any leak before returning the system to service.
- Before fitting A2C59513481, confirm the exact vehicle and engine variant against the EPC and workshop data.
- Check coding, adaptation and seal-replacement requirements in the vehicle's workshop manual before starting work.
- Keep the common-rail system clean and follow the manufacturer's diagnostic and repair procedure.
Frequently Asked Questions
Which vehicles is A2C59513481 listed for?
A2C59513481 is listed for the Renault Megane, Nissan Qashqai and Dacia Duster applications shown with the stated engine family. Confirm the exact vehicle and engine variant against the EPC or workshop data before ordering.
What should a mechanic check before ordering this pump?
Check that the vehicle and engine variant match the listed applications, inspect the old unit, and confirm any coding, adaptation or seal-replacement requirements in the vehicle's EPC or workshop manual before ordering A2C59513481.
What are the symptoms of a failed common-rail fuel pump?
Specific failure symptoms are not listed for this product. Diagnose the diesel common-rail system using the vehicle's workshop data, and confirm the fault before ordering A2C59513481.
Must the old pump be matched or adapted to the vehicle?
Matching or adaptation requirements are not stated for A2C59513481. Confirm the required procedure against the vehicle's EPC or workshop manual before removal and fitting.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.