Continental VDO A2C59517047
High Pressure Fuel Pump
BK2Q-9B395-AD, 1731745, 1747067, LR029969--1800 bar peak rail pressureProduct Overview
Continental VDO A2C59517047 is an authentic high-pressure common rail diesel injection supply pump engineered for Ford Transit VI and 2.2 TDCi Puma Euro 5 applications. Operating at up to 1800 bar under Euro 5 emission control, this precision unit incorporates electronic volume control (VCV) and pressure control (PCV) valves for accurate rail pressure regulation.
Verify VCV/PCV valve connections and high pressure line torque before installation.
Vehicle & Engine Fitment
| Vehicle | Engine | Years |
|---|---|---|
| Ford Transit VI | 2.2 TDCi (CYFA) | 2011-2014 |
| Ford Ranger (TKE) | 2.2 TDCi (GBVAJP) | 2011-2019 |
| Land Rover Defender | 2.2 Td4 | 2011-2016 |
Technical Specifications
| Specification | Value |
|---|---|
| SKU | A2C59517047 |
| Brand | CONTINENTAL |
| Fuel System | Continental / VDO Common Rail |
| Operating PressureCore Spec | |
| Hold Down Torque | 25 N·m |
| High-Pressure Line Torque | 65 N·m (Sprocket) / 25 N·m (Flange) |
| Emission Standard | Euro 5 |
| System Type | High Pressure Fuel Pump |
Installation Tips
- Depressurize And Isolate: Depressurize the high-pressure fuel system according to the service data, isolate the battery and fuel supply, and place a suitable container for spillage before beginning work.
- Clean Surrounding Area: Clean the pump mounting area, the high-pressure line connections, the low-pressure connections and the surrounding area of the cylinder head before loosening any fastener, then dry with lint-free material and keep all openings capped.
- Disconnect Connections: Disconnect the electrical connector, the spill connection and the low-pressure connections, then cap all open ports and protect the surrounding area from fuel spillage.
- Remove High-Pressure Line: Remove the high-pressure delivery line from the pump outlet, cap all open ports immediately, and discard the sealing washers if fitted; do not reuse the line if it is deformed or damaged.
- Extract Old Unit: Remove the drive coupling or sprocket, remove the pump flange fasteners, extract the old unit from its mounting bore, clean the bore and seat in the cylinder head, inspect the drive contact (roller follower, tappet or coupling as fitted) for wear or damage, and fit new seals to the pump flange.
- Seat And Tighten Unit: Seat the unit squarely in the bore, engage the drive coupling or sprocket, fit the hold-down and flange fasteners, tighten the pump flange fasteners to 25 N·m, and tighten the refitted drive coupling or sprocket to 65 N·m.
- Leak-Check And Start-Up: Reconnect the high-pressure delivery line and tighten the line to the torque specified in the service data, reconnect the low-pressure connections and electrical connector, then start the engine, check for leaks at the pump, lines and connections, and rectify any leak before returning the system to service.
- Before fitting, verify the replacement pump against the vehicle EPC and the original unit.
- Inspect the fuel system for contamination and confirm any required diagnostic or adaptation steps in the workshop manual.
- Use the vehicle's workshop data for tightening and pressure checks rather than generic values.
Frequently Asked Questions
Which vehicles does A2C59517047 fit?
A2C59517047 is listed for the Ford Transit, Ford Ranger TKE and Land Rover Defender applications shown in the fitment data. Confirm your engine code and vehicle details against the EPC before ordering.
What symptoms could point to a failed high-pressure common-rail fuel pump?
A failed high-pressure common-rail fuel pump can contribute to hard starting, poor power, misfire, or pressure-related faults, but these symptoms are not unique to the pump. Diagnose before replacing.
What should I check before ordering A2C59517047?
Check that the existing pump and vehicle match the listed applications, inspect the fuel system for contamination or damage, and confirm any required part details against the vehicle EPC or workshop manual before ordering.
Does the replacement pump need coding or adaptation?
The listing does not state whether the replacement unit needs coding or adaptation, so confirm that requirement against the vehicle EPC or workshop manual and follow the manufacturer's diagnostic procedure.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.