Continental VDO A2C59517048
High Pressure Fuel Pump
1841729--1800 bar peak rail pressureProduct Overview
Continental VDO A2C59517048 is an authentic high-pressure common rail diesel injection supply pump engineered for Ford Transit Custom and 2.2 TDCi Euro 5 applications. Operating at up to 1800 bar under Euro 5 emission control, this precision unit incorporates electronic volume control (VCV) and pressure control (PCV) valves for accurate rail pressure regulation.
Verify VCV/PCV valve connections and high pressure line torque before installation.
Vehicle & Engine Fitment
| Vehicle | Engine | Years |
|---|---|---|
| Ford Transit Custom | 2.2 TDCi (CYFF) | 2012-2016 |
Technical Specifications
| Specification | Value |
|---|---|
| SKU | A2C59517048 |
| Brand | CONTINENTAL |
| Fuel System | Continental / VDO Common Rail |
| Operating PressureCore Spec | |
| Hold Down Torque | 25 N·m |
| High-Pressure Line Torque | 65 N·m (Sprocket) / 25 N·m (Flange) |
| Emission Standard | Euro 5 |
| System Type | High Pressure Fuel Pump |
Installation Tips
- Depressurize And Isolate: Depressurize the high-pressure fuel system according to the service data, isolate the battery and fuel supply, and place a suitable container for spillage before beginning work.
- Clean Surrounding Area: Clean the pump mounting area, the high-pressure line connections, the low-pressure connections and the surrounding area of the cylinder head before loosening any fastener, then dry with lint-free material and keep all openings capped.
- Disconnect Connections: Disconnect the electrical connector, the spill connection and the low-pressure connections, then cap all open ports and protect the surrounding area from fuel spillage.
- Remove High-Pressure Line: Remove the high-pressure delivery line from the pump outlet, cap all open ports immediately, and discard the sealing washers if fitted; do not reuse the line if it is deformed or damaged.
- Extract Old Unit: Remove the drive coupling or sprocket, remove the pump flange fasteners, extract the old unit from its mounting bore, clean the bore and seat in the cylinder head, inspect the drive contact (roller follower, tappet or coupling as fitted) for wear or damage, and fit new seals to the pump flange.
- Seat And Tighten Unit: Seat the unit squarely in the bore, engage the drive coupling or sprocket, fit the hold-down and flange fasteners, tighten the pump flange fasteners to 25 N·m, and tighten the refitted drive coupling or sprocket to 65 N·m.
- Leak-Check And Start-Up: Reconnect the high-pressure delivery line and tighten the line to the torque specified in the service data, reconnect the low-pressure connections and electrical connector, then start the engine, check for leaks at the pump, lines and connections, and rectify any leak before returning the system to service.
- Verify part number A2C59517048 and cross references CK4Q-9B395-AA and 1841729 against the vehicle's EPC before ordering.
- Tighten the mounting/hold-down to 25 N·m and the high-pressure line to 65 N·m (Sprocket) or 25 N·m (Flange) as listed.
- Use DTCs P0087, P0089, P0191, P0088 and P0093 as diagnostic leads before condemning the high-pressure common-rail fuel pump.
Frequently Asked Questions
Will this pump fit my Ford Transit Custom 2.2 TDCi?
This high-pressure common-rail fuel pump, part number A2C59517048, is listed for Ford Transit Custom 2.2 TDCi (CYFF) 2012-2016 and the 2.2 TDCi Euro 5 CYFF engine family. Its cross references are CK4Q-9B395-AA and 1841729, and its system pressure is 1800 bar. Confirm fitment against the vehicle's EPC before ordering.
Which DTCs are listed for this pump, and do they confirm it has failed?
The listed diagnostic trouble codes are P0087, P0089, P0191, P0088 and P0093. These codes are not stated here as standalone confirmation of pump failure, so perform proper diagnosis and confirm against the vehicle's EPC or service information before replacing the pump.
Does this pump require coding or adaptation after fitting?
Coding or adaptation requirements are not stated in the verified facts. Confirm against the vehicle's EPC or service information instead of guessing.
Can I reuse the seals when fitting this pump?
Seal reuse guidance is not stated in the verified facts. Confirm against the vehicle's EPC or service information instead of guessing.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.