Catalog / DENSO / 295050-0180
DENSO

Denso 295050-0180

View Specs
SolenoidDenso Common Rail System (CRS)Euro 5

Injector Isuzu D Max 3.0 4JJ1 Specs

Reference data for DENSO 295050-0180 common rail injector · OEM 8-98284393-0, 8-98011604-5, 8-98151837-0, 8-98151837-1, 8-98151837-2, 8-98284393-1, 8-98011604-1, DCRI300180 · Application Isuzu 4JJ1-TC / 4JJ1-TCX (3.0L Ddi Common Rail)
OE REFERENCE8-98284393-0, 8-98011604-5, 8-98151837-0, 8-98151837-1, 8-98151837-2, 8-98284393-1, 8-98011604-1, DCRI300180
CONTROL VALVEPLATE
NOZZLEDLLA152P980 / G3S33
EMISSIONEuro 5
WARRANTY12 Months
01

Product Overview

WORKSHOP NOTICEECU Calibration / IMA Coding Required

This injector requires 6-8 digit calibration code programming (IMA / QR code) into the vehicle ECU (using Bosch KTS, Lexia/Diagbox or equivalent diagnostic equipment) following replacement to balance cylinder fuel delivery and prevent DTC P0300 misfire codes.

The Denso 295050-0180 (also cross-referenced under predecessor Denso 095000-8840, Isuzu OE 8-98284393-0, 8-98011604-5, 8-98151837-0, and trade reference DCRI300180) is a high-pressure electro-hydraulic common rail diesel injector engineered for the Isuzu 4JJ1-TC and 4JJ1-TCX 3.0L Ddi 16-valve turbocharged engine platform. Built for system operating rail pressures up to 1,800 bar (26,100 psi), this injector powers hundreds of thousands of Isuzu D-Max pickup trucks, MU-7 and MU-X SUVs, Rodeo utilities, and Isuzu N-Series (ELF) commercial delivery trucks across Australasia, Southeast Asia, Southern Africa, and the Middle East.

Before You Order

Always verify the OE reference 8982843930, 8980116045, 8981518370, 8981518371 stamped on your existing injector body before ordering; confirm the engine code and injector part number on the unit body both match your vehicle before unsealing the packaging. 295050-0180 needs its calibration code transferred after fitting; read the code from the new unit and program it with a compatible diagnostic tool.

Technical references: OEM service documentation, manufacturer catalogs, and field repair data.
02

Compatible Injectors

Primary
OEM Ref
OE Nozzle
03

Vehicle & Engine Fitment

VehicleEngineYears
Isuzu D-Max 3.0 Ddi PickupIsuzu 4JJ1-TC / 4JJ1-TCX (3.0L Ddi Common Rail)2007-2020
Isuzu MU-X 3.0 Ddi SUVIsuzu 4JJ1-TC / 4JJ1-TCX (3.0L Ddi Common Rail)2013-2020
Isuzu Rodeo 3.0 Ddi PickupIsuzu 4JJ1-TC / 4JJ1-TCX (3.0L Ddi Common Rail)2007-2012
Isuzu ELF / N-SeriesIsuzu 4JJ1-TC / 4JJ1-TCX (3.0L Ddi Common Rail)2007-2018
04

Technical Specifications

SpecificationValue
INJECTOR TYPECommon Rail Injector
SYSTEM PLATFORMCRI
CONTROL VALVECore Spec
NOZZLE CODECore Spec
OPERATING PRESSURECore Spec
05

Installation Tips

  1. Ream and inspect the cylinder head injector sleeve to ensure complete removal of carbon glaze.
  2. Install a brand-new genuine copper heat-shield washer (Isuzu 8-98043686-0, 1.5mm thickness).
  3. Fit a new rubber valve cover injector oil seal (Isuzu 8-97602498-0) lubricated with clean engine oil.
  4. Lower the injector straight into the bore, aligning the nozzle locating pin.
  5. Torque the injector hold-down clamp bolt to: 30 N·m (22 lb-ft / 3.1 kgf·m).
  6. Hand-tighten high-pressure fuel pipe union nuts, then torque to: 30 N·m (22 lb-ft).
  7. Torque fuel return spill rail banjo bolt to: 15 N·m (11 lb-ft).
Tips & Warnings:
  • Verify the old injector against part number 295050-0180 and cross references 2950500180, 8982843930, 8980116045, 8981518370, 8981518371, and 8981518372 before ordering.
  • Tighten the mounting/hold-down and high-pressure line to 30 N·m each.
  • Confirm coding/adaptation and seal reuse requirements against the vehicle's EPC/service information before installation.
06

Frequently Asked Questions

QWill this injector fit my Isuzu D-Max, MU-X, Rodeo, or ELF/N-Series?

Part 295050-0180 is a common-rail diesel injector listed for Isuzu D-Max 3.0 Ddi Pickup (2007-2020), MU-X 3.0 Ddi SUV (2013-2020), Rodeo 3.0 Ddi Pickup (2007-2012), and ELF/N-Series (2007-2018). It is for the Isuzu 4JJ1-TC / 4JJ1-TCX 3.0L Ddi Common Rail engine family. Confirm the exact vehicle against the EPC before ordering.

QWhat are the system pressure and torque specifications?

The system pressure is 1800 bar. The mounting/hold-down torque is 30 N·m, and the high-pressure line torque is 30 N·m.

QWhich diagnostic trouble codes are associated with this injector?

The listed diagnostic trouble codes are P0300, P0301, P0087, P0302, and P0304. Use these as the provided DTC references and confirm any further diagnostic or symptom interpretation against the vehicle's EPC/service information.

QDoes this injector need coding or adaptation after installation?

Coding/adaptation requirements are not stated in the verified facts. They must be confirmed against the vehicle's EPC/service information; no coding value is provided here.

07

Diagnostic Trouble Codes & Fault Protocols

Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:

P0087Critical

Fuel Rail/System Pressure Too Low

P0200Critical

Fuel Injector Circuit Malfunction (General / Common Driver Stage)

P0201Critical

Injector Circuit Malfunction - Cylinder 1

P0300Critical

Random or Multiple Cylinder Misfire Detected

P0202High

Cylinder 2 Injector Circuit Malfunction / Open Circuit

P0203High

Cylinder 3 Injector Circuit Malfunction / Open Circuit

Technical Diagnostic & Service Protocols

Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.

Workshop Diagnostic Protocol

Common Rail Injector Back-Leak Testing Guide

Common rail injector backleak test protocol. Graduated cylinder setup, warm idle & cranking limits in mL/min, control valve wear & P0087 diagnosis.

Read Technical Protocol
ECU Calibration Protocol

Bosch IMA Injector Coding & Location Guide

Bosch common rail injector IMA coding guide. Locate laser-etched 6-9 digit codes on body, ECU OBD2 adaptation steps & test bench calibration facts.

Read Technical Protocol
COMMON RAIL DIESEL WORKSHOP SOP

Stuck Injector Removal & Carbon Cleaning SOP | FuelPartsDB

Comprehensive workshop SOP for stuck diesel injector removal, pneumatic vibro-puller extraction, carbon solvent softening, and seat reaming without damage.

Read Technical Protocol
ASSEMBLY & INSTALLATION PROTOCOL

Diesel Injector Torque Specs & TTY Angles Guide

Common rail diesel injector hold-down bolt torque specs, TTY angles & pipe unions. Covers Bosch, Detroit DD13, Cummins & VAG 2.0 TDI workshop data in Nm.

Read Technical Protocol