ENGINE FAMILY SPECIFICATIONBOSCH COMMON RAILEuro 4

Cummins QSL9 / ISLe 8.9L & Komatsu SAA6D114E-3 (8.9L) Diesel Injector
Cross-Reference & Technical Specs

Authoritative technical specifications, verified Bosch part numbers, control valve stamping codes, nozzle spray orifices, and hold-down tightening torque for the Cummins QSL9 / ISLe 8.9L diesel engine family.

Primary OEMBOSCH
Control ValveF00RJ01941
Nozzle CodeDLLA118P2203
Peak Pressure1600 bar peak rail pressure
Hold-Down Torque30 N·m
01

All Verified Part Numbers for Cummins QSL9 / ISLe 8.9L & Komatsu SAA6D114E-3 (8.9L)

The following 5 common-rail injector assemblies are calibrated for this engine family. Click any SKU to view individual test bench flow curves, sister cross-references, and vehicle applications.

Part Number (SKU)Primary OE ReferenceControl ValveNozzle Code
3965721, 3973060, 4939061F00RJ01941DLLA118P2203
4942359, 3976631, 4930485F00RJ01941DLLA144P1707
6745113102, 6745123100, 3965721F00RJ01941DLLA118P1697
6745123100, 3965721, 3973060F00RJ01941DLLA118P1357
095000-5891, 095000-5892, DCRI105890PLATE #10DLLA152P989
02

Verified Vehicle Compatibility

Make / ManufacturerVehicle Model & PlatformEngine SpecificationModel Years
KomatsuPC300-8 / PC350-8 / WA380-6QSL9 / ISLe / SAA6D114E-32006-2018
CumminsQSL9QSL9 / ISLe / SAA6D114E-32007-2018
CaseCX290B / CX350BQSL9 / ISLe / SAA6D114E-32007-2017
CaseAxial-Flow (5088 / 6088 / 7088)QSL9 / ISLe / SAA6D114E-32008-2016
DongfengKinland (DFL 4251A / 4181A)QSL9 / ISLe / SAA6D114E-32006-2016
DongfengDFL 1250A / 1251AXAQSL9 / ISLe / SAA6D114E-32006-2016
DongfengDFL (3251A / 3310AXA)QSL9 / ISLe / SAA6D114E-32006-2016
DongfengDFZ 5251GJBA1 Concrete Mixer TruckQSL9 / ISLe / SAA6D114E-32006-2016
CumminsISLe / QSL9QSL9 / ISLe / SAA6D114E-32006-2018
KomatsuPC300-8 / PC300LC-8QSL9 / ISLe / SAA6D114E-32006-2018
KomatsuPC350-8 / PC350LC-8QSL9 / ISLe / SAA6D114E-32006-2018
KomatsuWA380-6 / WA430-6QSL9 / ISLe / SAA6D114E-32006-2018
CaseCX290B / CX350B / CX370BQSL9 / ISLe / SAA6D114E-32007-2017
KomatsuPC300-8 / PC350-8Cummins QSL9 / ISLe 8.9L & Komatsu SAA6D114E-3 (8.9L)2006-2020
03

Installation, Tightening Torque & Re-torque Protocol

Strict torque compliance is mandatory on Cummins QSL9 / ISLe 8.9L & Komatsu SAA6D114E-3 (8.9L) common-rail cylinder heads. Over-torquing stretches the injector body or strips the head clamping threads, while under-torquing allows combustion blow-by past the copper sealing washer:

🔧 Recommended Assembly Torques:
  • Hold-down clamp bolt: 30 N·m (cold state). Always clean the cylinder head recess with an injector seat reamer.
  • High-pressure rail flare nut: 25-30 N·m using a dedicated 17 mm line wrench.
  • Return leak-off banjo bolt: 9-12 N·m with fresh copper washers on both sides of the banjo union.
⚠️ ECU IMA Coding Requirement:

After fitting replacement injectors on Cummins QSL9 / ISLe 8.9L & Komatsu SAA6D114E-3 (8.9L), generate or program the cylinder-specific IMA calibration code into the engine ECU using an OEM-level scan tool (Bosch KTS, Renault CLIP, or VAG-COM) to prevent cylinder power imbalance and rough idle.

04

Technical Diagnostics FAQ for Cummins QSL9 / ISLe 8.9L & Komatsu SAA6D114E-3 (8.9L)

What DTC fault codes indicate a failing injector on Cummins QSL9 / ISLe 8.9L & Komatsu SAA6D114E-3 (8.9L)?

The most frequent fault codes are P0201 through P0204 (Injector Circuit Malfunction on Cylinders 1-4), P2146/P2149 (Injector Group Supply Voltage Error), and P0087 (Fuel Rail Pressure Low due to excessive internal leak-off). Measure solenoid coil resistance across the pins (0.5-1.5 Ω) and perform a graduated-bottle dynamic leak-back test to pinpoint the leaking cylinder.

Can sister SKUs within the Cummins QSL9 / ISLe 8.9L & Komatsu SAA6D114E-3 (8.9L) family be interchanged?

Not unless explicitly confirmed on the vehicle build plate. While sister SKUs share the same physical outer envelope and F00RJ01941 control valve, they differ in nozzle spray orifice angle and factory IMA flow calibration. Mixing sister SKUs on the same engine block can trigger rough idle, elevated exhaust gas temperatures (EGT), and MOT emissions failure.

Which specific Bosch injectors fit the Cummins QSL9 / ISLe 8.9L & Komatsu SAA6D114E-3 (8.9L) engine?

The verified genuine Bosch common-rail injectors engineered for the Cummins QSL9 / ISLe 8.9L & Komatsu SAA6D114E-3 (8.9L) engine family are: