ENGINE FAMILY SPECIFICATIONBOSCH COMMON RAILEuro 5

Weichai WP10 / WP12 (9.7L & 11.6L Heavy Commercial) Diesel Injector
Cross-Reference & Technical Specs

Authoritative technical specifications, verified Bosch part numbers, control valve stamping codes, nozzle spray orifices, and hold-down tightening torque for the Weichai WP10 / WP12 (9.7L diesel engine family.

Primary OEMBOSCH
Control ValveF00RJ02472
Nozzle CodeDLLA150P2142
Peak Pressure1600 bar peak rail pressure
Hold-Down Torque35 N·m
01

All Verified Part Numbers for Weichai WP10 / WP12 (9.7L & 11.6L Heavy Commercial)

The following 5 common-rail injector assemblies are calibrated for this engine family. Click any SKU to view individual test bench flow curves, sister cross-references, and vehicle applications.

Part Number (SKU)Primary OE ReferenceControl ValveNozzle Code
1112BF11010, 612600080611F00RJ02472DLLA150P2142
612600080977, 612600080618, DZ91189360055F00RJ01692DLLA151P2182
612600080977, 612600080618, DZ91189360055F00RJ01692DLLA151P2182
612630090028, 612630090001, 612630090012F00RJ01727DLLA148P2221
612600080618, 612600080971, 0445120227F00RJ01692DLLA141P2146
02

Verified Vehicle Compatibility

Make / ManufacturerVehicle Model & PlatformEngine SpecificationModel Years
DongfengKingrun (T-Lift / Cargo Truck)WP10 / WP122008-
DongfengDFL Series Medium Duty CommercialWP10 / WP122009-
FotonAuman / ForlandWP10 / WP122010-
ShacmanDelong F2000 / F3000 / M3000WP10 / WP122008-2018
FotonAuman ETX / GTLWP10 / WP122009-2019
SinotrukHowo / Steyr KingWP10 / WP122008-2017
BeibenV3 2638 (Heavy Haul Tractor)WP10 / WP122008-2018
ShacmanDelong F3000 / X3000WP10 / WP122011-2022
SinotrukHowo A7 / T7HWP10 / WP122012-2021
FotonAuman GTL / ESTWP10 / WP122013-2022
BeibenV3 Heavy Haul TractorWP10 / WP122012-2021
ShacmanDelong (F3000/X3000)Weichai WP10 / WP12 (9.7L & 11.6L Heavy Commercial)2009-2020
SinotrukHOWO A7 / T7HWeichai WP10 / WP12 (9.7L & 11.6L Heavy Commercial)2010-2019
FotonAuman GTL / ETXWeichai WP10 / WP12 (9.7L & 11.6L Heavy Commercial)2010-2020
BeibenHeavy Duty TractorsWeichai WP10 / WP12 (9.7L & 11.6L Heavy Commercial)2010-2021
03

Installation, Tightening Torque & Re-torque Protocol

Strict torque compliance is mandatory on Weichai WP10 / WP12 (9.7L & 11.6L Heavy Commercial) common-rail cylinder heads. Over-torquing stretches the injector body or strips the head clamping threads, while under-torquing allows combustion blow-by past the copper sealing washer:

🔧 Recommended Assembly Torques:
  • Hold-down clamp bolt: 35 N·m (cold state). Always clean the cylinder head recess with an injector seat reamer.
  • High-pressure rail flare nut: 25-30 N·m using a dedicated 17 mm line wrench.
  • Return leak-off banjo bolt: 9-12 N·m with fresh copper washers on both sides of the banjo union.
⚠️ ECU IMA Coding Requirement:

After fitting replacement injectors on Weichai WP10 / WP12 (9.7L & 11.6L Heavy Commercial), generate or program the cylinder-specific IMA calibration code into the engine ECU using an OEM-level scan tool (Bosch KTS, Renault CLIP, or VAG-COM) to prevent cylinder power imbalance and rough idle.

04

Technical Diagnostics FAQ for Weichai WP10 / WP12 (9.7L & 11.6L Heavy Commercial)

What DTC fault codes indicate a failing injector on Weichai WP10 / WP12 (9.7L & 11.6L Heavy Commercial)?

The most frequent fault codes are P0201 through P0204 (Injector Circuit Malfunction on Cylinders 1-4), P2146/P2149 (Injector Group Supply Voltage Error), and P0087 (Fuel Rail Pressure Low due to excessive internal leak-off). Measure solenoid coil resistance across the pins (0.5-1.5 Ω) and perform a graduated-bottle dynamic leak-back test to pinpoint the leaking cylinder.

Can sister SKUs within the Weichai WP10 / WP12 (9.7L & 11.6L Heavy Commercial) family be interchanged?

Not unless explicitly confirmed on the vehicle build plate. While sister SKUs share the same physical outer envelope and F00RJ02472 control valve, they differ in nozzle spray orifice angle and factory IMA flow calibration. Mixing sister SKUs on the same engine block can trigger rough idle, elevated exhaust gas temperatures (EGT), and MOT emissions failure.

Which specific Bosch injectors fit the Weichai WP10 / WP12 (9.7L & 11.6L Heavy Commercial) engine?

The verified genuine Bosch common-rail injectors engineered for the Weichai WP10 / WP12 (9.7L & 11.6L Heavy Commercial) engine family are: