Catalog / BOSCH / 0445120134
BOSCH

Bosch 0445120134

View Specs
SolenoidBosch Common Rail Heavy Commercial (CRIN2)Euro 4

Injector Weichai 612600080618 WP12

Reference data for BOSCH 0445120134 common rail injector · OEM 612600080618, 612600080971, 0445120227, 0445120228 · Application Weichai WP10 / WP12 (9.7L & 11.6L Heavy Commercial)
OE REFERENCE612600080618, 612600080971, 0445120227, 0445120228
CONTROL VALVEF00RJ01692
NOZZLEDLLA141P2146
EMISSIONEuro 4
WARRANTY12 Months
01

Product Overview

WORKSHOP NOTICEECU Calibration / IMA Coding Required

This injector requires 6-8 digit calibration code programming (IMA / QR code) into the vehicle ECU (using Bosch KTS, Lexia/Diagbox or equivalent diagnostic equipment) following replacement to balance cylinder fuel delivery and prevent DTC P0300 misfire codes.

The Bosch 0445120134 (Weichai OEM 612600080618, alternate 612600080971, superseded by 0445120227, factory remanufactured 0986435553) is a heavy-duty CRIN2-16 electro-hydraulic common rail diesel injector calibrated for the Weichai WP12 (11.596L / 12L) Euro 3 and Euro 4 commercial vehicle engine platform. Engineered to operate under rail pressures up to 1,600 bar (23,200 psi), this injector is original factory equipment on thousands of Shacman Delong F3000/X3000 trucks, Sinotruk HOWO A7 series, Foton Auman GTL heavy dump trucks, and Beiben heavy haulers operating across global transport corridors.

Before You Order

Always verify the OE reference 612600080618, 612600080971 stamped on your existing injector body before ordering; confirm the engine code and injector part number on the unit body both match your vehicle before unsealing the packaging. 0445120134 needs its calibration code transferred after fitting; read the code from the new unit and program it with a compatible diagnostic tool.

Technical references: OEM service documentation, manufacturer catalogs, and field repair data.
02

Compatible Injectors

Primary
OEM Ref
OE Nozzle
03

Vehicle & Engine Fitment

VehicleEngineYears
Shacman Delong (F3000/X3000)Weichai WP10 / WP12 (9.7L & 11.6L Heavy Commercial)2009-2020
Sinotruk HOWO A7 / T7HWeichai WP10 / WP12 (9.7L & 11.6L Heavy Commercial)2010-2019
Foton Auman GTL / ETXWeichai WP10 / WP12 (9.7L & 11.6L Heavy Commercial)2010-2020
Beiben Heavy Duty TractorsWeichai WP10 / WP12 (9.7L & 11.6L Heavy Commercial)2010-2021
04

Technical Specifications

SpecificationValue
INJECTOR TYPECommon Rail Injector
SYSTEM PLATFORMCRI
CONTROL VALVECore Spec
🔗 Shared Valve (6 assemblies):0445120081044512015304451202270445120357
NOZZLE CODECore Spec
OPERATING PRESSURECore Spec
05

Installation Tips

  1. Fit new copper sealing washer (2.0mm thickness) onto injector nozzle seat.
  2. Insert injector into cylinder head bore and hand-tighten hold-down clamp bolt.
  3. Pre-install the side fuel connector tube (quill tube) and hand-tighten retaining nut.
  4. Torque injector hold-down clamp bolt to: 30 N·m + 90° (or workshop single torque 65 N·m).
  5. Torque fuel connector tube retaining nut to: 55 N·m (40.5 lb-ft).
  6. Torque high-pressure fuel pipe union nut to: 35 N·m (25.8 lb-ft).
  7. Torque leak-off return pipe banjo bolt to: 15 N·m (11.1 lb-ft).
Tips & Warnings:
  • Check the injector part number 0445120134 and the listed cross references against the old unit before ordering.
  • Torque the mounting/hold-down fasteners to 30 N·m + 90° and the high-pressure line to 35 N·m.
  • Confirm 1600 bar system compatibility and Weichai WP10/WP12 fitment before installation.
06

Frequently Asked Questions

QWhich commercial trucks and heavy vehicles use Bosch injector 0445120134?

Bosch 0445120134 is designed for Weichai WP12 series (11.6L, Euro 3 / Euro 4) heavy commercial diesel engines. It is widely installed on Shacman Delong F3000 / X3000, Sinotruk HOWO A7 / T7H, Foton Auman GTL, Beiben 2638 heavy-duty tractor and dump trucks, as well as XCMG mobile cranes from 2009 to 2020.

QWhat are the Weichai OE numbers and nozzle specifications for Bosch 0445120134?

Weichai OE part numbers are 612600080618 and 612600080971, superseded by 0445120227, with Bosch remanufactured reference 0986435553. The injector assembly features the Bosch DLLA141P2146 nozzle and operates on the CRIN2-16 (1,600 bar) platform.

QWhat is the hold-down clamp bolt torque for Weichai WP12 injectors?

Tighten the M8 injector hold-down clamp bolt to 30 N·m + 90° angle. Always seat a new copper washer on the injector tip and verify that the cylinder head bore is completely free of carbon build-up.

QDoes Bosch 0445120134 require IMA calibration coding into the Weichai ECU?

Yes. Each injector has an alphanumeric IMA code stamped on the top connector. Entering this code into the Weichai WISE/EDC7 engine ECU ensures accurate fuel metering, quiet idle operation, and compliance with exhaust emission standards.

07

Diagnostic Trouble Codes & Fault Protocols

Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:

P0087Critical

Fuel Rail/System Pressure Too Low

P0200Critical

Fuel Injector Circuit Malfunction (General / Common Driver Stage)

P0201Critical

Injector Circuit Malfunction - Cylinder 1

P0300Critical

Random or Multiple Cylinder Misfire Detected

P0202High

Cylinder 2 Injector Circuit Malfunction / Open Circuit

P0203High

Cylinder 3 Injector Circuit Malfunction / Open Circuit

08

Cross-Reference & Compatibility

Sister parts, same-platform variants, and known incompatibilities.

Technical Diagnostic & Service Protocols

Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.

Workshop Diagnostic Protocol

Common Rail Injector Back-Leak Testing Guide

Common rail injector backleak test protocol. Graduated cylinder setup, warm idle & cranking limits in mL/min, control valve wear & P0087 diagnosis.

Read Technical Protocol
ECU Calibration Protocol

Bosch IMA Injector Coding & Location Guide

Bosch common rail injector IMA coding guide. Locate laser-etched 6-9 digit codes on body, ECU OBD2 adaptation steps & test bench calibration facts.

Read Technical Protocol
COMMON RAIL DIESEL WORKSHOP SOP

Stuck Injector Removal & Carbon Cleaning SOP | FuelPartsDB

Comprehensive workshop SOP for stuck diesel injector removal, pneumatic vibro-puller extraction, carbon solvent softening, and seat reaming without damage.

Read Technical Protocol
ASSEMBLY & INSTALLATION PROTOCOL

Diesel Injector Torque Specs & TTY Angles Guide

Common rail diesel injector hold-down bolt torque specs, TTY angles & pipe unions. Covers Bosch, Detroit DD13, Cummins & VAG 2.0 TDI workshop data in Nm.

Read Technical Protocol