BOSCH 0445120126
Common Rail Injector for Kobelco SK135 SK140 Mitsubishi D04FR 3.3L
32G61-00010, VA32G6100010F00RJ02266DLLA135P17471600 bar peak rail pressureProduct Overview
The Bosch 0445120126 is an industrial-duty CRIN2-16 common rail diesel fuel injector engineered for heavy earthmoving machinery powered by the Mitsubishi D04FR and D04FR-TAA 3.3L four-cylinder turbocharged intercooled diesel engines (factory platform code YN33CRD, rated from 69 kW / 92 HP to 74 kW / 99 HP). Widely deployed in Kobelco SK130-8, SK135SR-2, and SK140SRLC hydraulic excavators as well as Kato HD512IV machines meeting Tier 3 and Stage IIIA emissions, this injector operates at rail pressures up to 1600 bar. Internal hydraulic components include precision hole-type nozzle 0433172069 (stamped DLLA135P1747), control valve set F00RJ02266, and 24V solenoid actuator F00VC30301. Workshop failure symptoms under harsh excavation duty cycles include excessive backleakage, hard starting when hot, black smoke under hydraulic load, engine surging, and rail pressure fault codes.
CRITICAL INSTALLATION NOTICE: Thoroughly clean and ream the injector seat in the cylinder head prior to installation. Always fit a brand-new copper sealing washer of correct thickness (standard 1.5mm) and lubricate the viton body O-ring with clean engine oil. Torque the injector hold-down clamp bolt to 25-30 N·m in a smooth single motion to ensure gas-tight combustion sealing and prevent blow-by carbon buildup.
Technical Specifications
| Specification | Value |
|---|---|
| Injection System | Bosch CRIN2-16 |
| Operating Rail PressureCore Spec | |
| Nozzle Part NumberCore Spec | |
| Nozzle CodeCore Spec | |
| Control Valve AssemblyCore Spec | 🔗 Shared Valve (2 assemblies):0445120289 |
| Magnet Assembly | F00VC30301 |
| Seal Ring Kit | F00RJ02176 |
| Injector Hold-Down Bolt Torque | 25-30 N·m📐 Torque & Angle Wizard → |
| Fuel Line Nut Torque | 30-35 N·m |
| IMA Coding Required | No (Non-IMA hydraulic calibration unit) |
| Factory Warranty | 12 Months |
Installation Tips
- Depressurize And Isolate: Depressurize the high-pressure fuel system, isolate the fuel supply, and let the system reach a safe state before beginning work.
- Clean Surrounding Area: Clean the cylinder head and the injector bore surroundings before opening any fuel or electrical connection; remove loose debris and cover exposed openings with clean caps.
- Disconnect Connections: Disconnect the electrical connector and the spill-return connection from the injector; support the harness and spill line away from the injector bore.
- Remove High-Pressure Line: Remove the high-pressure line from the injector, cap the line and injector ports immediately, and keep the line in a clean area.
- Extract Clean And Seat: Extract the old unit, clean the injector bore and seat, fit a new copper combustion washer, lubricate the body O-ring, and seat the unit squarely in the injector bore.
- Tighten And Reconnect: Tighten the hold-down to 25-30 N·m, reconnect the high-pressure line and tighten the line fitting to 30-35 N·m, then record the supplied injector data from the unit label.
- Leak-Check And Start-Up: Perform a leak-check at the high-pressure line and injector body after start-up, inspect for fuel seepage, and confirm the engine runs without fault; stop the engine and correct any leak before returning to service.
- Tighten the mounting/hold-down to 25-30 N·m and the high-pressure line to 30-35 N·m for this 1600 bar common-rail system.
- Verify the old injector part number against 0445120126 and the listed cross references before ordering.
- Confirm fitment and any coding/adaptation requirements against the vehicle's EPC before installation.
Frequently Asked Questions
Will this injector fit my Kobelco or Kato machine?
It fits Mitsubishi D04FR (3.3L) applications: Kobelco SK135SR-2 (2007-2015), Kobelco SK140SR-8/SK140SRLC (2008-2016), Kobelco SK130-8 (2008-2015), and Kato HD512IV (2008-2015). Confirm your exact machine/application against the vehicle's EPC before ordering.
How can I verify the old injector before ordering?
Check the old unit's part number against 0445120126 and the cross references 32G6100010, VA32G6100010, 0445120027, 0445120029, and 0445120059. If the number is not visible or does not match, confirm fitment against the vehicle's EPC.
What diagnostic trouble codes are associated with this injector listing?
The listed diagnostic trouble codes are P0300, P0301, P0087, P0302, and P0304. Confirm the correct part and application against the vehicle's EPC before replacing the injector.
Does this common-rail diesel injector require coding or adaptation?
Coding/adaptation requirements are not stated in the provided facts, so confirm them against the vehicle's EPC before installation. The injector is listed as part number 0445120126 for the Mitsubishi D04FR (3.3L) engine family.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.