0445120289
Bosch Perkins 1104D Injector 2645A749 Data
2645A749, 2645A737, 2645A745, 2645A746, 320-0670, 10R-7670F00RJ02266DLLA142P22621600 bar peak rail pressureProduct Overview
The Bosch 0445120289 (Perkins OE part numbers 2645A749, 2645A737, 2645A745, Caterpillar part number 320-0670, and remanufactured references 0986435555 / 10R-7670) is an industrial electro-hydraulic common rail diesel injector from the heavy-duty Bosch CRIN2-16 family. Engineered specifically for the 4-cylinder Perkins 1104D-E44T / 1104D-E44TA (4.4L) and Caterpillar C4.4 ACERT industrial diesel engines, it complies with EPA Tier 3 / EU Stage IIIA off-highway emissions standards. Operating at peak injection rail pressures up to 1600 bar, this injector powers widely deployed earthmoving equipment, including Caterpillar 416E / 420E / 428E / 430E backhoe loaders, M313D / M315D wheeled excavators, and Perkins standby generator sets worldwide. Hydraulic flow metering is governed by a precision Bosch control valve assembly F00RJ02266 (matched with valve ball F00VC05008) and a multi-hole atomizing nozzle tip DLLA142P2262 (0433172262). The injector body interfaces directly with a side-entry high-pressure connector tube, demanding a strict 3-stage alignment torquing procedure with a clamp bolt final torque of 26 N·m (19 lb·ft) and connector nut torque of 50 N·m (37 lb·ft).
Always verify the OE reference 2645A749, 2645A737, 2645A745, 2645A746 stamped on your existing injector body before ordering; confirm the engine code and injector part number on the unit body both match your vehicle before unsealing the packaging. 0445120289 needs no ECU calibration coding; no code transfer is required after fitting.
Vehicle & Engine Fitment
| Vehicle | Engine | Years |
|---|---|---|
| Perkins 1104D (E44T / E44TA) - Generator & Industrial | Caterpillar C4.4 / C6.4 / C6.6 ACERT & Perkins 1104D / 1106D | 2008-2020 |
| Caterpillar 416E / 420E / 428E Backhoe Loader | Caterpillar C4.4 / C6.4 / C6.6 ACERT & Perkins 1104D / 1106D | 2008-2020 |
Technical Specifications
| Specification | Value |
|---|---|
| INJECTOR TYPE | Common Rail Injector |
| SYSTEM PLATFORM | CRI |
| CONTROL VALVECore Spec | 🔗 Shared Valve (2 assemblies):0445120126 |
| NOZZLE CODECore Spec | |
| OPERATING PRESSURECore Spec |
Installation Tips
- Clean Well & Seat Bore: Ream and clean the injector sleeve in the cylinder head. Vacuum out all debris and dry the seat.
- New Flame Washer: Slip a brand-new 1.5 mm copper washer (ID 7.7 mm / OD 15.0 mm) over the nozzle tip. Never reuse old washers.
- Insert Injector & Pre-Align: Lightly lubricate the body O-ring and lower the injector vertically into the cylinder head. Turn the injector side-port directly toward the connector tube bore.
- Snug Connector Tube (Stage 1): Install a new connector tube and hand-thread its retaining nut. Tighten to a preliminary snug torque of 15 N·m (11 lb·ft) to center the spherical cone inside the injector port.
- Final Clamp Torquing (Stage 2): Torque the injector hold-down clamp bolt to its final specification of 26 N·m (19 lb·ft).
- Final Connector Tube Torquing (Stage 3): Tighten the connector tube retaining nut to 50 N·m (37 lb·ft). This sequence ensures leak-free metal-to-metal sealing without side-loading the injector needle.
- Fuel Return Rail: Install the spill rail with new aluminum seal washers and torque the banjo bolts to 15 N·m (11 lb·ft).
- Priming & Air Bleed: Cycle the manual primer pump until firm before cranking to prevent high-pressure pump cavitation.
- Torque the mounting/hold-down fasteners to 26 N·m.
- Torque the high-pressure line to 26 N·m.
- Check the part number and listed cross references before installation.
Frequently Asked Questions
Will part number 0445120289 fit my Perkins 1104D or Caterpillar 416E?
Part number 0445120289 is a common-rail diesel injector for the Caterpillar C4.4 / C6.4 / C6.6 ACERT and Perkins 1104D / 1106D engine family. Listed fitment includes Perkins 1104D (E44T / E44TA) generator and industrial applications from 2008-2020, plus Caterpillar 416E / 420E / 428E backhoe loaders from 2008-2020. Confirm the exact engine and vehicle against the vehicle EPC before ordering.
What system pressure and torque specs apply to this injector?
The listed system pressure is 1600 bar. The mounting/hold-down torque is 26 N·m, and the high-pressure line torque is 26 N·m.
Does this injector require coding or adaptation, and which DTCs are listed?
No coding/adaptation data is listed in the verified facts; confirm any coding or adaptation requirement against the vehicle EPC. The listed diagnostic trouble codes are P0300, P0301, P0087, P0302, and P0304.
How can I verify the old injector against the listed cross references?
The listed cross references are 0445120289, 2645A749, 2645A737, 2645A745, 2645A746, and 3200670. Compare these with the old injector and records, then confirm the exact fitment against the vehicle EPC.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.