Catalog / CATERPILLAR / 320-0680
CATERPILLAR

320-0680

View Specs
SolenoidCaterpillar Common Rail SystemEuro 4

Caterpillar C6.6 Perkins Injector 2645A747 Specs

Reference data for CATERPILLAR 320-0680 common rail injector · OEM 2645A747, 10R-7672, 321-3600, 295-9130, 10R-7670, 2645A749, 2645A734, 2645A717, 5256607, 2645A751, 10R-7671 · Application Caterpillar C4.4 / C6.4 / C6.6 ACERT & Perkins 1104D / 1106D
OE REFERENCE2645A747, 10R-7672, 321-3600, 295-9130, 10R-7670, 2645A749, 2645A734, 2645A717, 5256607, 2645A751, 10R-7671
CONTROL VALVECAT C6.6 CRS ELECTRO-HYDRAULIC SPOOL VALVE
NOZZLEG3S33 / Multi-Hole Common Rail Nozzle
EMISSIONEuro 4
WARRANTY12 Months
01

Product Overview

WORKSHOP NOTICEECU Calibration / IMA Coding Required

This injector requires 6-8 digit calibration code programming (IMA / QR code) into the vehicle ECU (using Bosch KTS, Lexia/Diagbox or equivalent diagnostic equipment) following replacement to balance cylinder fuel delivery and prevent DTC P0300 misfire codes.

The CATERPILLAR 320-0680 is an authentic heavy-duty common rail diesel fuel injector engineered for 6.6L Caterpillar C6.6 ACERT and Perkins 1106D-E66TA electronically controlled industrial diesel engines compliant with EPA Tier 3 and EU Stage IIIA emissions mandates. Serving as the primary combustion power unit on Caterpillar 320D, 320D L, 321D LCR, and 323D series hydraulic crawler excavators, 924H/930H wheel loaders, and D6K track-type tractors, this injector operates at system rail pressures up to 1800 bar (26,100 psi). The precision multi-hole nozzle geometry coupled with an ultra-responsive electro-hydraulic spool valve executes pilot, main, and post-injection strategies with microsecond timing. Part number 320-0680 interchanges directly with Perkins manufacturing part number 2645A747, production references 321-3600 and 295-9130, and Caterpillar factory remanufactured assemblies 10R-7672, 10R-7670, and 10R-7671. Each injector features an individually calibrated Trim Code representing its exact physical flow curve; entering this calibration into the engine ECM via Cat Electronic Technician ensures seamless multi-cylinder balance, optimal fuel economy, and absolute protection against diagnostic trouble codes 100-3 (oil pressure sensor) and 164-2/164-3 (fuel pressure variance).

Before You Order

Always record the unique Caterpillar Trim Code (Injector Calibration File) engraved on the injector body before lowering it into the cylinder head. The 320-0680 (Perkins 2645A747, Reman 10R-7672) is the primary electro-hydraulic common rail injector for Caterpillar C6.6 ACERT and Perkins 1106D Tier 3 / Stage IIIA industrial engines powering CAT 320D and 323D hydraulic excavators. Torque the injector hold-down clamp bolt to exactly 30 N·m (22 lb·ft) and the high-pressure fuel supply line nut to 30 N·m (22 lb·ft). Programming the Trim File into the engine ECM via Cat ET (Electronic Technician) is mandatory to eliminate cylinder contribution imbalances and rail pressure deviation fault codes.

Technical references: OEM service documentation, manufacturer catalogs, and field repair data.
02

Compatible Injectors

Primary
OEM Ref
Aftermarket
OE Nozzle
03

Vehicle & Engine Fitment

VehicleEngineYears
Caterpillar 320 (Gen D) - 320D / 320D L / 320D LNC4.4 / C6.4 / C6.6 / 1104D / 1106D2006-2015
Caterpillar 323D / 323D L / 323D LNC4.4 / C6.4 / C6.6 / 1104D / 1106D2006-2015
Caterpillar 321D LCR Short Radius ExcavatorC4.4 / C6.4 / C6.6 / 1104D / 1106D2006-2014
Caterpillar 924H / 928H / 930HC4.4 / C6.4 / C6.6 / 1104D / 1106D2007-2015
Caterpillar D6K / D6NC4.4 / C6.4 / C6.6 / 1104D / 1106D2007-2016
Perkins 1106D-E66TA (Industrial / Genset)C4.4 / C6.4 / C6.6 / 1104D / 1106D2006-2020
04

Technical Specifications

SpecificationValue
SKU320-0680
BrandCATERPILLAR
TypeElectro-Hydraulic Common Rail Fuel Injector
OE Number320-0680, 2645A747, 10R-7672, 321-3600, 295-9130, 10R-7670
Injection SystemCaterpillar Common Rail System (CRS)
Operating PressureCore Spec
Torque Spec30 N·m
Hold Down Torque30 N·m
Warranty12 Months
Emission StandardEPA Tier 3 / EU Stage IIIA
Engine FamilyCaterpillar C6.6 ACERT & Perkins 1106D (6.6L)
Coding RequiredYes (Cat ET Injector Trim File / Trim Code)
05

Installation Tips

Tools needed: Caterpillar Electronic Technician (Cat ET) diagnostic software with Comm Adapter 3, Calibrated torque wrench (10 to 60 N·m range), Brass cylinder head injector sleeve wire brush and vacuum suction extractor, Clean metric flare nut crowfoot wrench set (17 mm and 19 mm)

  1. Clean the cylinder head injector bore thoroughly using a brass bore brush and vacuum suction; ensure all hardened carbon deposits and any remnants of the old copper seating washer are completely extracted.
  2. Inspect the injector hold-down clamp, spherical washer, and bolt threads. Lubricate the clamp bolt threads and contact face with clean 15W-40 heavy-duty engine oil.
  3. Fit a new copper sealing washer onto the injector nozzle shank. Install a new upper body O-ring seal; lubricate the O-ring with clean engine oil, strictly keeping the nozzle spray tip dry and contaminant-free.
  4. Insert injector 320-0680 squarely into the cylinder head sleeve until the nozzle washer firmly seats against the lower cylinder head surface.
  5. Position the injector hold-down clamp squarely over the injector shoulder and thread the clamp bolt finger-tight.
  6. Connect the high-pressure fuel line between the fuel rail and injector inlet fitting, threading both tube nuts by hand to guarantee clean thread engagement without cross-threading.
  7. Tighten the injector hold-down clamp bolt to a final torque of 30 N·m (22 lb·ft). Verify that the injector body remains square and does not cock or bind during torquing.
  8. Tighten the high-pressure fuel injection line nuts to 30 N·m (22 lb·ft) at both the injector inlet fitting and the common fuel rail connection.
  9. Reattach the solenoid terminal wire nuts; tighten to 2.5 N·m (22 lb·in). Do not overtighten, which can fracture the molded internal solenoid studs.
  10. Connect Cat ET via the diagnostic port, access Service > Calibrations > Injector Code Calibration, and enter the alphanumeric Trim File / Trim Code printed on the injector body into the corresponding cylinder.
Tips & Warnings:
  • Mandatory Trim Code Calibration: Cat C6.6 ECM relies on the Trim File to apply micro-second fuel delivery compensations across varying load and speed bands. Running uncalibrated injectors triggers rough idle, excessive black exhaust smoke, and cylinder balance DTCs.
  • Single-Use Copper Washer Rule: Never reuse a copper sealing washer. Reusing an old washer or stacking multiple washers alters nozzle combustion chamber protrusion depth, leading to incomplete combustion, localized cylinder head overheating, and severe combustion gas blow-by.
  • Quill Tube & Line Alignment: Before applying final torque to the clamp bolt, ensure the fuel line flare nut threads smoothly by hand. Forcing an unaligned tube nut creates metal galling and high-pressure fuel leakage beneath the valve cover.
  • Zero Starting Fluid Policy: Never introduce ether or aerosol starting fluids into the intake manifold of a common rail C6.6 engine. Extreme cylinder pressure spikes will shatter the nozzle tip and cause catastrophic piston crown erosion.
06

Frequently Asked Questions

QWhat machines and engines use Caterpillar injector 320-0680?

Part number 320-0680 is engineered for 6.6L Caterpillar C6.6 ACERT and Perkins 1106D-E66TA Tier 3 / Stage IIIA diesel engines powering CAT 320D, 320D L, 321D LCR, and 323D hydraulic crawler excavators, 924H/930H wheel loaders, D6K dozers, and Perkins industrial power generators.

QWhat OEM part numbers interchange with Caterpillar 320-0680?

Caterpillar 320-0680 directly interchanges with Perkins OE number 2645A747, Caterpillar production numbers 321-3600, 295-9130, 292-3780, and Caterpillar factory remanufactured part numbers 10R-7672, 10R-7670, and 10R-7671.

QWhat are the installation torque specifications for injector 320-0680?

The injector hold-down clamp bolt must be tightened to 30 N·m (22 lb·ft). The high-pressure fuel injection line flare nuts at both the fuel rail and injector inlet must be torqued to 30 N·m (22 lb·ft), and the solenoid electrical harness nuts to 2.5 N·m (22 lb·in).

QWhy is Trim Code calibration required in Cat ET after installation?

Each common rail injector possesses minute hydraulic flow tolerances generated during precision manufacturing. Entering the Trim Code via Cat ET programs the ECM with specific delivery offset parameters for each cylinder, preventing rough running, power loss, and rail pressure control trouble codes.

07

Diagnostic Trouble Codes & Fault Protocols

Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:

P0087Critical

Fuel Rail/System Pressure Too Low

P0200Critical

Fuel Injector Circuit Malfunction (General / Common Driver Stage)

P0201Critical

Injector Circuit Malfunction - Cylinder 1

P0300Critical

Random or Multiple Cylinder Misfire Detected

P0202High

Cylinder 2 Injector Circuit Malfunction / Open Circuit

P0203High

Cylinder 3 Injector Circuit Malfunction / Open Circuit

08

Cross-Reference & Compatibility

Sister parts, same-platform variants, and known incompatibilities.

Technical Diagnostic & Service Protocols

Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.

Workshop Diagnostic Protocol

Common Rail Injector Back-Leak Testing Guide

Common rail injector backleak test protocol. Graduated cylinder setup, warm idle & cranking limits in mL/min, control valve wear & P0087 diagnosis.

Read Technical Protocol
ECU Calibration Protocol

Bosch IMA Injector Coding & Location Guide

Bosch common rail injector IMA coding guide. Locate laser-etched 6-9 digit codes on body, ECU OBD2 adaptation steps & test bench calibration facts.

Read Technical Protocol
COMMON RAIL DIESEL WORKSHOP SOP

Stuck Injector Removal & Carbon Cleaning SOP | FuelPartsDB

Comprehensive workshop SOP for stuck diesel injector removal, pneumatic vibro-puller extraction, carbon solvent softening, and seat reaming without damage.

Read Technical Protocol
ASSEMBLY & INSTALLATION PROTOCOL

Diesel Injector Torque Specs & TTY Angles Guide

Common rail diesel injector hold-down bolt torque specs, TTY angles & pipe unions. Covers Bosch, Detroit DD13, Cummins & VAG 2.0 TDI workshop data in Nm.

Read Technical Protocol