Continental VDO A2C59511363
High Pressure Fuel Pump
LR005549, 4H2Q-9B395-AF, JDE3839X39-800-300-018Z-1650 bar peak rail pressureProduct Overview
Continental VDO A2C59511363 is an authentic high-pressure common rail diesel injection supply pump engineered for Land Rover Discovery 3 and 2.7 TDV6 applications. Operating at up to 1650 bar under Euro 4 emission control, this precision unit incorporates electronic volume control (VCV) and pressure control (PCV) valves for accurate rail pressure regulation.
Verify VCV/PCV valve connections and high pressure line torque before installation.
Vehicle & Engine Fitment
| Vehicle | Engine | Years |
|---|---|---|
| Land Rover Discovery 3 | 2.7 TDV6 (276DT) | 2004-2009 |
| Jaguar S-Type | 2.7 D (AJD) | 2004-2007 |
Technical Specifications
| Specification | Value |
|---|---|
| SKU | A2C59511363 |
| Brand | CONTINENTAL |
| Fuel System | Continental / VDO Common Rail |
| Operating PressureCore Spec | |
| Control ValveCore Spec | 🔗 Shared Valve (2 assemblies):A2C59511601 |
| Hold Down Torque | 25 N·m |
| High-Pressure Line Torque | 55 N·m (Sprocket) / 25 N·m (Flange) |
| Emission Standard | Euro 4 |
| System Type | High Pressure Fuel Pump |
Installation Tips
- Depressurize And Isolate: Depressurize the high-pressure fuel system according to the service data, isolate the battery and fuel supply, and place a suitable container for spillage before beginning work.
- Clean Surrounding Area: Clean the pump mounting area, the high-pressure line connections, the low-pressure connections and the surrounding area of the cylinder head before loosening any fastener, then dry with lint-free material and keep all openings capped.
- Disconnect Connections: Disconnect the electrical connector, the spill connection and the low-pressure connections, then cap all open ports and protect the surrounding area from fuel spillage.
- Remove High-Pressure Line: Remove the high-pressure delivery line from the pump outlet, cap all open ports immediately, and discard the sealing washers if fitted; do not reuse the line if it is deformed or damaged.
- Extract Old Unit: Remove the drive coupling or sprocket, remove the pump flange fasteners, extract the old unit from its mounting bore, clean the bore and seat in the cylinder head, inspect the drive contact (roller follower, tappet or coupling as fitted) for wear or damage, and fit new seals to the pump flange.
- Seat And Tighten Unit: Seat the unit squarely in the bore, engage the drive coupling or sprocket, fit the hold-down and flange fasteners, tighten the pump flange fasteners to 25 N·m, and tighten the refitted drive coupling or sprocket to 55 N·m.
- Leak-Check And Start-Up: Reconnect the high-pressure delivery line and tighten the line to the torque specified in the service data, reconnect the low-pressure connections and electrical connector, then start the engine, check for leaks at the pump, lines and connections, and rectify any leak before returning the system to service.
- Confirm A2C59511363 and the cross references 5WS40064, LR005549, 4H2Q-9B395-AF, and JDE3839 against the vehicle’s EPC before installation.
- Tighten the mounting/hold-down fasteners to 25 N·m.
- Tighten the high-pressure line to 55 N·m at the sprocket and 25 N·m at the flange.
Frequently Asked Questions
Which vehicles does part A2C59511363 fit?
A2C59511363 is a high-pressure common-rail fuel pump for the 2.7 TDV6 / 276DT engine family with 1650 bar system pressure. It is listed for Land Rover Discovery 3 2.7 TDV6 (276DT) 2004-2009 and Jaguar S-Type 2.7 D (AJD) 2004-2007, so confirm fitment against the vehicle’s EPC before ordering.
Which diagnostic trouble codes are listed for this fuel pump?
The verified diagnostic trouble codes are P0087, P0089, P0191, P0088, and P0093. Pump-specific symptoms are not stated in the verified facts, so confirm them against the vehicle’s EPC before diagnosis.
What are the mounting and high-pressure line torque figures?
The mounting/hold-down torque is 25 N·m. The high-pressure line torque is 55 N·m (Sprocket) / 25 N·m (Flange).
How can I verify the old pump, and is coding/adaptation required?
Check the old pump against A2C59511363 and the cross references 5WS40064, LR005549, 4H2Q-9B395-AF, and JDE3839. Coding/adaptation is not stated in the verified facts, so it must be confirmed against the vehicle’s EPC before proceeding.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.