Continental VDO A2C59511601
High Pressure Fuel Pump
1980J3, 9652173680X39-800-300-018Z-1600 bar peak rail pressureProduct Overview
Continental VDO A2C59511601 is an authentic high-pressure common rail diesel injection supply pump engineered for Peugeot 407 and 2.0 HDi applications. Operating at up to 1600 bar under Euro 4 emission control, this precision unit incorporates electronic volume control (VCV) and pressure control (PCV) valves for accurate rail pressure regulation.
Verify VCV/PCV valve connections and high pressure line torque before installation.
Technical Specifications
| Specification | Value |
|---|---|
| SKU | A2C59511601 |
| Brand | CONTINENTAL |
| Fuel System | Continental / VDO Common Rail |
| Operating PressureCore Spec | |
| Control ValveCore Spec | 🔗 Shared Valve (2 assemblies):A2C59511363 |
| Hold Down Torque | 24 N·m |
| High-Pressure Line Torque | 50 N·m (Sprocket) / 24 N·m (Flange) |
| Emission Standard | Euro 4 |
| System Type | High Pressure Fuel Pump |
Installation Tips
- Depressurize And Isolate: Depressurize the high-pressure fuel system according to the service data, isolate the battery and fuel supply, and place a suitable container for spillage before beginning work.
- Clean Surrounding Area: Clean the pump mounting area, the high-pressure line connections, the low-pressure connections and the surrounding area of the cylinder head before loosening any fastener, then dry with lint-free material and keep all openings capped.
- Disconnect Connections: Disconnect the electrical connector, the spill connection and the low-pressure connections, then cap all open ports and protect the surrounding area from fuel spillage.
- Remove High-Pressure Line: Remove the high-pressure delivery line from the pump outlet, cap all open ports immediately, and discard the sealing washers if fitted; do not reuse the line if it is deformed or damaged.
- Extract Old Unit: Remove the drive coupling or sprocket, remove the pump flange fasteners, extract the old unit from its mounting bore, clean the bore and seat in the cylinder head, inspect the drive contact (roller follower, tappet or coupling as fitted) for wear or damage, and fit new seals to the pump flange.
- Seat And Tighten Unit: Seat the unit squarely in the bore, engage the drive coupling or sprocket, fit the hold-down and flange fasteners, tighten the pump flange fasteners to 24 N·m, and tighten the refitted drive coupling or sprocket to 50 N·m.
- Leak-Check And Start-Up: Reconnect the high-pressure delivery line and tighten the line to the torque specified in the service data, reconnect the low-pressure connections and electrical connector, then start the engine, check for leaks at the pump, lines and connections, and rectify any leak before returning the system to service.
- Before installation, confirm the replacement pump part number A2C59511601 matches the vehicle’s EPC data.
- Use clean workshop practices and cap fuel system openings to prevent contamination.
- After fitting, follow the vehicle-specific diagnostic and leak-check procedure from the workshop manual.
Frequently Asked Questions
Will this pump fit my vehicle?
Fitment must be confirmed by VIN against the vehicle’s EPC. The pump is listed for the specified Peugeot and Citroen applications with the RHR engine family; do not rely on model names alone.
What symptoms suggest the high-pressure common-rail pump has failed?
Typical diagnostic signs include hard starting, poor running, fuel pressure faults, or metal debris in the rail system. Confirm the cause with live data and the vehicle’s workshop test procedure before replacing the pump.
What should I check before ordering A2C59511601?
Check the vehicle’s EPC fitment by VIN, inspect for contamination or debris in the fuel system, and confirm the fault with workshop diagnostics. Replace related contaminated components only as the vehicle’s manual specifies.
Does the replacement pump need coding or adaptation?
Coding, matching, and adaptation requirements are not stated here. Confirm them against the vehicle’s EPC or workshop manual before installation, as some common-rail systems require diagnostic procedures.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.