Continental VDO A2C59511606
common rail injector
8200380253, 8200842205-M0007P147.61600 bar peak rail pressureProduct Overview
The Continental VDO (Siemens VDO) A2C59511606 is a common-rail diesel injector for Renault Clio / Megane / Modus / Scenic and Nissan Qashqai / Tiida, 1.5 dCi (K9K, 66/85 kW). OE references: 8200380253, 8200842205.
Verify VDO 6-Hex IIC calibration code and OEM cross reference before installation.
Technical Specifications
| Specification | Value |
|---|---|
| SKU | A2C59511606 |
| Brand | CONTINENTAL |
| Fuel System | Continental / VDO Common Rail |
| Operating PressureCore Spec | |
| Hold Down Torque | 4 N·m + 65° |
| High-Pressure Line Torque | 25 N·m |
| Coding Required | VDO 6-Hex IIC |
| Emission Standard | Euro 4 |
| Injector Type | Piezoelectric |
Installation Tips
- Depressurize And Isolate: Depressurize the fuel system and isolate it from all energy sources before opening any high-pressure connection; wait until the system is fully depressurized and secure the work area against accidental start-up.
- Clean And Disconnect: Clean the surrounding area of the cylinder head and injector bore before work, then disconnect the electrical connector and the spill/leak-off connections from the injector; keep removed connections clean and protected.
- Remove High-Pressure Line: Remove the high-pressure line from the injector and cap or protect the line and injector ports immediately to prevent dirt ingress; do not bend or stress the line during removal.
- Extract Old Injector: Release the hold-down and extract the old unit without twisting it; keep the piezo injector straight because it is bending-sensitive, and check the injector seat before fitting the replacement, following the manufacturer's service information for any additional sealing or damping components.
- Clean Bore And Fit Seals: Clean the injector bore and seat carefully, remove all residue without damaging sealing surfaces, fit new seals, and seat the unit straight in the bore, following the manufacturer's service information for component orientation.
- Tighten Hold-Down And Reconnect Line: Tighten the hold-down to 4 N·m, then rotate a further 65°, then reconnect the high-pressure line to the injector and tighten the line fitting to 25 N·m; keep the line aligned and free from side load.
- Calibration Coding: Record the VDO 6-Hex IIC calibration code and program it with a compatible diagnostic tool.
- Leak-Check And Start-Up: After coding, run the engine through a leak-check procedure and inspect all high-pressure connections and the injector seat for leaks; correct any leak before start-up, then start the engine and confirm smooth operation.
- Verify the part number A2C59511606 and cross references 8200380253 and 8200842205 before fitting.
- Tighten the mounting/hold-down to 4 N·m + 65° and the high-pressure line to 25 N·m.
- Confirm the exact 1.5 dCi K9K fitment against the vehicle’s EPC before ordering.
Frequently Asked Questions
Will this part fit my Renault or Nissan 1.5 dCi K9K?
This common-rail diesel injector, part number A2C59511606, is listed for Renault Clio III 1.5 dCi (K9K), Renault Megane II 1.5 dCi (K9K), Renault Scenic II 1.5 dCi (K9K), Renault Modus 1.5 dCi (K9K), and Nissan Qashqai (J10) 1.5 dCi (K9K). For any other application, confirm against the vehicle’s EPC instead of guessing.
Which diagnostic trouble codes are listed for this injector?
The verified diagnostic trouble codes for this listing are P0300, P0087, P0201, P0204, and P0202. Use these codes with the vehicle’s diagnostic data to confirm the fault; any additional symptom diagnosis is not stated in the verified facts.
What torque values do I need for installation?
The mounting/hold-down torque is 4 N·m + 65°, and the high-pressure line torque is 25 N·m. This common-rail diesel injector is listed for a system pressure of 1600 bar.
How do I verify the old injector and cross references?
Check for part number A2C59511606 and cross references 8200380253 and 8200842205. Confirm the engine is the 1.5 dCi K9K and the vehicle is one of the listed fitments; if anything does not match, confirm against the vehicle’s EPC instead of guessing.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.