ENGINE FAMILY SPECIFICATIONCONTINENTAL COMMON RAILEuro 4

1.5 dCi, K9K Diesel Injector
Cross-Reference & Technical Specs

Authoritative technical specifications, verified Bosch part numbers, control valve stamping codes, nozzle spray orifices, and hold-down tightening torque for the 1.5 dCi, K9K diesel engine family.

Primary OEMCONTINENTAL
Control ValveSee Product Detail
Nozzle CodeSee Product Detail
Peak Pressure1600 bar peak rail pressure
Hold-Down Torque4 N·m + 65°
01

All Verified Part Numbers for 1.5 dCi, K9K

The following 2 common-rail injector assemblies are calibrated for this engine family. Click any SKU to view individual test bench flow curves, sister cross-references, and vehicle applications.

Part Number (SKU)Primary OE ReferenceControl ValveNozzle Code
8200430599, 8200663258, 8200821184See Product DetailSee Product Detail
8200380253, 8200842205See Product DetailM0007P147.6
02

Verified Vehicle Compatibility

Make / ManufacturerVehicle Model & PlatformEngine SpecificationModel Years
RenaultClio III1.5 dCi (K9K)All
RenaultMegane II1.5 dCi (K9K)All
RenaultScenic II1.5 dCi (K9K)All
RenaultModus1.5 dCi (K9K)All
NissanQashqai (J10)1.5 dCi (K9K)All
NissanTiida (C11)1.5 dCi (K9K)All
03

Installation, Tightening Torque & Re-torque Protocol

Strict torque compliance is mandatory on 1.5 dCi, K9K common-rail cylinder heads. Over-torquing stretches the injector body or strips the head clamping threads, while under-torquing allows combustion blow-by past the copper sealing washer:

🔧 Recommended Assembly Torques:
  • Hold-down clamp bolt: 4 N·m + 65° (cold state). Always clean the cylinder head recess with an injector seat reamer.
  • High-pressure rail flare nut: 25-30 N·m using a dedicated 17 mm line wrench.
  • Return leak-off banjo bolt: 9-12 N·m with fresh copper washers on both sides of the banjo union.
⚠️ ECU IMA Coding Requirement:

After fitting replacement injectors on 1.5 dCi, K9K, generate or program the cylinder-specific IMA calibration code into the engine ECU using an OEM-level scan tool (Bosch KTS, Renault CLIP, or VAG-COM) to prevent cylinder power imbalance and rough idle.

04

Technical Diagnostics FAQ for 1.5 dCi, K9K

What DTC fault codes indicate a failing injector on 1.5 dCi, K9K?

The most frequent fault codes are P0201 through P0204 (Injector Circuit Malfunction on Cylinders 1-4), P2146/P2149 (Injector Group Supply Voltage Error), and P0087 (Fuel Rail Pressure Low due to excessive internal leak-off). Measure solenoid coil resistance across the pins (0.5-1.5 Ω) and perform a graduated-bottle dynamic leak-back test to pinpoint the leaking cylinder.

Can sister SKUs within the 1.5 dCi, K9K family be interchanged?

Not unless explicitly confirmed on the vehicle build plate. While sister SKUs share the same physical outer envelope and See Product Detail control valve, they differ in nozzle spray orifice angle and factory IMA flow calibration. Mixing sister SKUs on the same engine block can trigger rough idle, elevated exhaust gas temperatures (EGT), and MOT emissions failure.

Which specific Bosch injectors fit the 1.5 dCi, K9K engine?

The verified genuine Bosch common-rail injectors engineered for the 1.5 dCi, K9K engine family are: