Continental VDO A2C59511609
CR Pump High Pressure Fuel Pump
1355053, 1459401, 1543842, 4M5Q9B395AD--1600 bar peak rail pressureProduct Overview
The Continental VDO (Siemens VDO) A2C59511609 is a CR-Pump (high-pressure fuel pump) for Ford C-Max / Connect / Galaxy / Mondeo / S-Max / Transit, engine 1.8 TDCi (Lynx, 85/92 kW). OE references: 1355053, 1459401, 1543842, 4M5Q9B395AD (VDO 5WS40094).
Verify part A2C59511609 and the listed Ford 1.8 TDCi applications before ordering; this Continental VDO high-pressure common-rail pump must be fitted with new seals, and the fuel circuit must be primed and checked for leaks.
Technical Specifications
| Specification | Value |
|---|---|
| SKU | A2C59511609 |
| Brand | CONTINENTAL |
| Fuel System | Continental / VDO Common Rail |
| Operating PressureCore Spec | |
| Hold Down Torque | 30 N·m |
| High-Pressure Line Torque | 30 N·m |
| Emission Standard | Euro 4 |
| System Type | High Pressure Fuel Pump |
Installation Tips
- Depressurize the fuel system and isolate it before opening any high-pressure connection.
- Clean the high-pressure pump area and disconnect the electrical connector and fuel lines.
- Remove the high-pressure lines and cap or protect all open ports immediately.
- Remove the mounting fasteners and extract the old high-pressure pump.
- Clean the mounting and sealing surfaces carefully, then fit new seals.
- Install the new high-pressure pump and align its drive with the timing belt/chain or camshaft as specified.
- Reconnect the fuel lines and electrical connector, keeping all connections clean.
- Prime the fuel circuit and check all high-pressure connections for leaks before start-up.
- This high-pressure common-rail pump raises rail pressure to 1600 bar.
- Use new seals, keep high-pressure connections clean and protected, prime the fuel circuit, and check for leaks before start-up.
Frequently Asked Questions
Will this pump fit my Ford 1.8 TDCi Lynx vehicle?
The listing fits Ford C-Max (DM2), Connect, Galaxy, Mondeo IV and S-Max models with the 1.8 TDCi (Lynx) engine, using part number A2C59511609. Confirm the exact vehicle variant against the vehicle’s EPC before ordering.
How can I verify the old high-pressure pump before replacing it?
Check the old unit against part number A2C59511609 and the listed cross references: 1355053, 1459401, 1543842, 4M5Q9B395AD and 5WS40094. It is a high-pressure common-rail fuel pump rated at 1600 bar for the 1.8 TDCi (Lynx) engine family; confirm remaining fitment details against the vehicle’s EPC.
Do I need to code or adapt the pump after fitting, and what fault codes are listed?
Coding/adaptation requirements are not stated in the verified facts, so confirm this against the vehicle’s EPC or service information before installation. The listed diagnostic trouble codes are P0300, P0087, P0201, P0204 and P0202.
What torques should I use, and can I reuse the seals?
The verified facts specify 30 N·m for the mounting/hold-down torque and 30 N·m for the high-pressure line torque. Seal reuse is not stated, so confirm it against the vehicle’s EPC or service information before installation.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.