Catalog / DELPHI / EJBR04701D
DELPHI

Delphi EJBR04701D

View Specs
SolenoidDelphi Common Rail SystemEuro 4

common rail injector

Reference data for DELPHI EJBR04701D common rail injector · OEM 1459746, 4M5Q-9K546-AD, 1545621 · Application Lynx 1.8 TDCi, KKDA, FFDA
OE REFERENCE1459746, 4M5Q-9K546-AD, 1545621
CONTROL VALVE28239294
NOZZLEL222PRD
EMISSIONEuro 4
WARRANTY12 Months
01

Product Overview

WORKSHOP NOTICEECU Calibration / IMA Coding Required

This injector requires 6-8 digit calibration code programming (IMA / QR code) into the vehicle ECU (using Bosch KTS, Lexia/Diagbox or equivalent diagnostic equipment) following replacement to balance cylinder fuel delivery and prevent DTC P0300 misfire codes.

The Delphi EJBR04701D is an authentic common rail diesel injector calibrated for Ford Focus II and Lynx 1.8 TDCi engine applications. Operating at an engineered rail pressure of 1600 bar, this solenoid assembly features the precision 28239294 control valve and L222PRD nozzle. Mandatory ECU calibration requires programming the cylinder-specific C2i 16-digit hexadecimal code into the engine control unit to establish smooth delivery balance and Euro 4 emissions compliance. Typical failure symptoms include control valve erosion causing excessive back-leakage, rail pressure deficit (DTC P0087), and erratic cold-start idling. Overhauling necessitates clean room assembly and genuine replacement seals.

Before You Order

Verify Delphi C2i/C3i calibration code and OEM cross reference before installation.

Technical references: OEM service documentation, manufacturer catalogs, and field repair data.
02

Compatible Injectors

OEM Ref
OE Nozzle
03

Vehicle & Engine Fitment

VehicleEngineYears
Ford Focus II1.8 TDCi (KKDA)2005-2012
Ford Mondeo IV1.8 TDCi (FFBA)2007-2012
Ford C-Max I1.8 TDCi (KKDA)2005-2010
04

Technical Specifications

SpecificationValue
SKUEJBR04701D
BrandDELPHI
Fuel SystemCommon Rail (Delphi DFI)
Operating PressureCore Spec
Control ValveCore Spec
🔗 Shared Valve (40 assemblies):EJBR04501DEJBR04601DEJBR04901DEJBR05102D
Nozzle CodeCore Spec
Hold Down Torque35 N·m
High-Pressure Line Torque30 N·m
Coding RequiredYes
Emission StandardEuro 4
05

Installation Tips

  1. Depressurize And Clean: Depressurize the fuel system and isolate it according to the workshop procedure, then clean the surrounding area of the injector bore and the cylinder head before opening any connection.
  2. Disconnect Connections: Disconnect the electrical connector and the spill/return connection from the injector, then plug or cover all exposed ports and fittings to prevent dirt ingress.
  3. Remove High-Pressure Line: Remove the high-pressure line from the injector inlet, cap or plug the line and the injector port immediately, and keep the line ends clean.
  4. Extract Old Unit: Release and remove the hold-down device, extract the old injector from the bore, and remove any old seals without damaging the cylinder head or injector bore.
  5. Clean Bore And Seat: Clean the injector bore and seat in the cylinder head, remove carbon and debris, inspect the sealing surfaces, and keep the area covered until the new injector is ready.
  6. Fit Seals And Seat Unit: Fit new seals to the injector, seat the unit in the injector bore, tighten the hold-down to 35 N·m, then reconnect the high-pressure line and tighten it to 30 N·m; reconnect the electrical connector and spill connection.
  7. Calibration Coding: Record the 20-digit Delphi C2i/C3i calibration code and program it with a suitable diagnostic tool.
  8. Leak-Check And Start-Up: Leak-check the high-pressure line and injector connections, start the engine, and inspect for fuel leaks and abnormal running; stop the engine if any leak is found.
Tips & Warnings:
  • Tighten the mounting/hold-down to 35 N·m.
  • Tighten the high-pressure line to 30 N·m.
  • Verify part number EJBR04701D and the cross references before fitting.
06

Frequently Asked Questions

QWill this injector fit my Ford Focus II 1.8 TDCi KKDA?

It is listed for Ford Focus II 1.8 TDCi (KKDA) 2005-2012, Ford Mondeo IV 1.8 TDCi (FFBA) 2007-2012, and Ford C-Max I 1.8 TDCi (KKDA) 2005-2010. It is a common-rail diesel injector with part number EJBR04701D for the Lynx 1.8 TDCi, KKDA, FFDA engine family. Confirm final fitment against the vehicle's EPC.

QWhat diagnostic trouble codes are associated with this injector listing?

The verified diagnostic trouble codes for this listing are P0300, P0087, P0201, P0204, and P0202. These codes are diagnostic references only, and actual failed-unit symptoms are not stated in the verified facts. Confirm any diagnosis against the vehicle's EPC instead of guessing.

QDoes this injector need coding or adaptation after installation?

Coding or adaptation requirements are not stated in the verified facts. They must be confirmed against the vehicle's EPC instead of guessed. This is a common-rail diesel injector, so use the vehicle-specific procedure only after confirmation.

QHow can I verify the old injector before ordering?

Check the old unit against part number EJBR04701D and the cross references EJBR02301Z, 1459746, 4M5Q-9K546-AD, and 1545621. Also confirm the Lynx 1.8 TDCi, KKDA, FFDA engine family and the listed fitment. If the marking is unclear, confirm against the vehicle's EPC instead of guessing.

07

Diagnostic Trouble Codes & Fault Protocols

Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:

P0087Critical

Fuel Rail/System Pressure Too Low

P0201High

Injector Circuit Malfunction - Cylinder 1

P0202High

Cylinder 2 Injector Circuit Malfunction / Open Circuit

P0203High

Cylinder 3 Injector Circuit Malfunction / Open Circuit

P0204High

Cylinder 4 Injector Circuit Malfunction / Open Circuit

P0300High

Random or Multiple Cylinder Misfire Detected

08

Cross-Reference & Compatibility

Sister parts, same-platform variants, and known incompatibilities.

Technical Diagnostic & Service Protocols

Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.

Workshop Diagnostic Protocol

Common Rail Injector Back-Leak Testing Guide

Common rail injector backleak test protocol. Graduated cylinder setup, warm idle & cranking limits in mL/min, control valve wear & P0087 diagnosis.

Read Technical Protocol
ECU Calibration Protocol

Bosch IMA Injector Coding & Location Guide

Bosch common rail injector IMA coding guide. Locate laser-etched 6-9 digit codes on body, ECU OBD2 adaptation steps & test bench calibration facts.

Read Technical Protocol
COMMON RAIL DIESEL WORKSHOP SOP

Stuck Injector Removal & Carbon Cleaning SOP | FuelPartsDB

Comprehensive workshop SOP for stuck diesel injector removal, pneumatic vibro-puller extraction, carbon solvent softening, and seat reaming without damage.

Read Technical Protocol
ASSEMBLY & INSTALLATION PROTOCOL

Diesel Injector Torque Specs & TTY Angles Guide

Common rail diesel injector hold-down bolt torque specs, TTY angles & pipe unions. Covers Bosch, Detroit DD13, Cummins & VAG 2.0 TDI workshop data in Nm.

Read Technical Protocol