Continental VDO A2C59513595
1600 bar High Pressure Common Rail Fuel Pump for Renault Megane CC 1.5 dCi (K9K 832)
8200704191--1600 bar peak rail pressureProduct Overview
High-pressure common-rail fuel pump Continental VDO A2C59513595 for Renault Megane CC (EZ0/1_) 1.5 dCi (K9K 832), system pressure 1600 bar. The pump raises rail pressure and is driven by the timing belt/chain or camshaft. Fit it with new seals, prime the fuel circuit and check all high-pressure connections for leaks.
Verify the pump part number A2C59513595 and vehicle application before ordering; confirm that new seals are available.
Technical Specifications
| Specification | Value |
|---|---|
| SKU | A2C59513595 |
| Brand | CONTINENTAL |
| Fuel System | Continental / VDO Common Rail |
| Operating PressureCore Spec | |
| Hold Down Torque | 28 N·m |
| High-Pressure Line Torque | 28 N·m |
| Emission Standard | Euro 5 |
| System Type | High Pressure Fuel Pump |
Installation Tips
- Depressurize the fuel system and isolate the high-pressure pump before opening any connection.
- Clean the pump mounting area and surrounding fuel connections before removal.
- Disconnect the fuel lines and electrical connector, then cap or protect all open ports.
- Remove the old high-pressure pump and keep its timing belt/chain or camshaft drive area clean.
- Fit the replacement pump with new seals and align it correctly with its drive.
- Reconnect the high-pressure lines and electrical connector without stressing the pump.
- Prime the fuel circuit and check all high-pressure connections for leaks before start-up.
- Use new seals, keep the fuel system clean, prime the fuel circuit before start-up and check all high-pressure connections for leaks.
- Follow the vehicle manufacturer service information for the timing belt/chain or camshaft drive.
Frequently Asked Questions
Will this high-pressure common-rail fuel pump fit my Renault Megane CC 1.5 dCi?
It is listed for the Renault Megane CC (EZ0/1_) 1.5 dCi (K9K 832) from 2010-2016, with part number A2C59513595 and cross-reference 8200704191. Confirm fitment against the vehicle's EPC before ordering.
What pressure and tightening torques are specified for this pump?
The system pressure is 1600 bar. The mounting/hold-down torque is 28 N·m, and the high-pressure line torque is 28 N·m. Confirm any additional installation details against the vehicle's EPC.
Which diagnostic trouble codes are listed for this pump?
The listed diagnostic trouble codes are P0300, P0087, P0201, P0204, and P0202. These should be checked against the vehicle's EPC before condemning the pump, as the verified facts do not list other symptoms.
Does this pump require coding/adaptation or new seals?
Coding/adaptation requirements and seal-reuse instructions are not stated in the verified facts. Confirm both against the vehicle's EPC before installation.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.