095000-5600
Denso Mitsubishi 4D56 Injector 1465A054 Specs
1465A041, 1465A054, 095000-5601, DCRI105600, SM295040-6230, 295040-6230PLATEDLLA145P8701800 bar peak rail pressureProduct Overview
The Denso 095000-5600 (Mitsubishi OEM 1465A041 / 1465A054, aftermarket reference DCRI105600) is an electro-hydraulic common rail diesel injector engineered for the high-output Mitsubishi 4D56 2.5L DI-D 16-valve turbocharged intercooled engine platform. Operating up to 1,800 bar (26,100 psi), this injector powers hundreds of thousands of Mitsubishi L200 pickups, Triton commercial utilities, and Pajero Sport 4x4 vehicles globally.
Always verify the OE reference 1465A041, 1465A054, 0950005601, DCRI105600 stamped on your existing injector body before ordering; confirm the engine code and injector part number on the unit body both match your vehicle before unsealing the packaging. 095000-5600 needs its calibration code transferred after fitting; read the code from the new unit and program it with a compatible diagnostic tool.
Vehicle & Engine Fitment
| Vehicle | Engine | Years |
|---|---|---|
| Mitsubishi L200 | Mitsubishi 4D56 HP (2.5L DI-D Common Rail) | 2005-2015 |
| Mitsubishi Triton 2.5 DI-D 4WD Utility | Mitsubishi 4D56 HP (2.5L DI-D Common Rail) | 2006-2015 |
| Mitsubishi Pajero Sport 2.5 DI-D SUV | Mitsubishi 4D56 HP (2.5L DI-D Common Rail) | 2008-2015 |
| Mitsubishi Challenger 2.5 DI-D 4WD | Mitsubishi 4D56 HP (2.5L DI-D Common Rail) | 2008-2015 |
| Mitsubishi Nativa 2.5 DI-D 4x4 | Mitsubishi 4D56 HP (2.5L DI-D Common Rail) | 2008-2015 |
Technical Specifications
| Specification | Value |
|---|---|
| Operating PressureCore Spec | |
| Nozzle CodeCore Spec | 🔗 Shared Nozzle (2 assemblies):095000-7760 |
| Control ValveCore Spec | |
| Injector Hold-Down Clamp Torque | 28 N·m📐 Torque & Angle Wizard → |
| Fuel Line Nut Torque | 32 N·m |
| Leak-Off Line Torque | 14 N·m |
| Spray Orifices | 6 Micro-Holes |
| IMA Coding Required | Yes (30-Digit Denso QR Code) |
| Copper Washer Thickness | 1.5 mm |
Installation Tips
- Combustion Chamber Seat Reaming: Clean carbon crust from the bottom injector sleeve bore using a brass wire brush. Never scrape with hard steel screwdrivers.
- Copper Washer Orientation: Always discard used crush washers. Install a fresh 1.5 mm annealed copper sealing washer (ID 7.7 mm × OD 15.0 mm).
- Clamp Bolt Tightening Sequence: Torque the injector hold-down clamp bolt to 28 N·m (21 lb·ft). Over-tightening deforms the injector body tube, causing internal needle valve stickiness.
- High-Pressure Pipe Nut: Align the fuel supply pipe square to the inlet nipple before tightening the union nut to 32 N·m (24 lb·ft).
- Leak-Off Spill Rail: Tighten the return line banjo union bolts to 14 N·m using new aluminum sealing gaskets.
- Torque the injector mounting/hold-down fasteners to 28 N·m, torque the high-pressure line to 32 N·m, and observe the listed 1800 bar system pressure.
- Verify the old injector markings against 095000-5600 and the listed cross references before installation.
- Confirm vehicle fitment and any coding/adaptation requirement against the vehicle's EPC before starting work.
Frequently Asked Questions
Which vehicles and engine family does this 095000-5600 common-rail diesel injector fit?
This 095000-5600 common-rail diesel injector is listed for the Mitsubishi 4D56 HP (2.5L DI-D Common Rail) engine family. Fitment includes Mitsubishi L200 (2005-2015), Triton 2.5 DI-D 4WD Utility (2006-2015), Pajero Sport 2.5 DI-D SUV (2008-2015), Challenger 2.5 DI-D 4WD (2008-2015), and Nativa 2.5 DI-D 4x4 (2008-2015). If the vehicle is not covered by this list, confirm fitment against the vehicle's EPC.
What symptoms or diagnostic trouble codes are listed for a failed unit?
Symptoms are not stated in the verified facts; the diagnostic trouble codes listed for this injector are P0300, P0301, P0087, P0302, and P0304. Confirm actual fault diagnosis against the vehicle's EPC instead of guessing.
Does this injector require coding or adaptation after installation?
Coding/adaptation requirements are not stated in the verified facts. Confirm the required procedure against the vehicle's EPC instead of guessing.
How can I verify the old injector and cross-reference it?
Check the old unit for 095000-5600 and compare it with cross references 0950005600, 1465A041, 1465A054, 0950005601, DCRI105600, and SM2950406230. If the markings are unclear or the application is uncertain, confirm against the vehicle's EPC.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.