Catalog / DENSO / 095000-7760
DENSO

Denso 095000-7760

View Specs
SolenoidDenso Common Rail System (CRS)Euro 4

Injector Toyota 23670 30300 1KD FTV

Reference data for DENSO 095000-7760 common rail injector · OEM 23670-30300, 23670-30410, 23670-30280, 23670-39215, 23670-39365, 095000-7761, 095000-5930, DCRI107760 · Application Toyota 1KD-FTV (3.0L D-4D DOHC 16V)
OE REFERENCE23670-30300, 23670-30410, 23670-30280, 23670-39215, 23670-39365, 095000-7761, 095000-5930, DCRI107760
CONTROL VALVEPLATE
NOZZLEDLLA145P870
EMISSIONEuro 4
WARRANTY12 Months
01

Product Overview

WORKSHOP NOTICEECU Calibration / IMA Coding Required

This injector requires 6-8 digit calibration code programming (IMA / QR code) into the vehicle ECU (using Bosch KTS, Lexia/Diagbox or equivalent diagnostic equipment) following replacement to balance cylinder fuel delivery and prevent DTC P0300 misfire codes.

The Denso 095000-7760 (Toyota OEM 23670-30300, 23670-30410, 23670-30280, and aftermarket reference DCRI107760) is an electro-hydraulic common rail diesel injector engineered specifically for the iconic Toyota 1KD-FTV 3.0L D-4D 16-valve DOHC turbocharged engine platform. Calibrated for operating rail pressures up to 1,600 bar (23,200 psi), this injector powers hundreds of thousands of Toyota Land Cruiser Prado 120 and 150 series, Hilux Vigo pickups, Fortuner SUVs, and HiAce commercial vans worldwide.

Before You Order

Always verify the OE reference 2367030300, 2367030410, 2367030280, 2367039215 stamped on your existing injector body before ordering; confirm the engine code and injector part number on the unit body both match your vehicle before unsealing the packaging. 095000-7760 needs its calibration code transferred after fitting; read the code from the new unit and program it with a compatible diagnostic tool.

Technical references: OEM service documentation, manufacturer catalogs, and field repair data.
02

Compatible Injectors

Primary
OEM Ref
OE Nozzle
03

Vehicle & Engine Fitment

VehicleEngineYears
Toyota Land Cruiser Prado (120/150)Toyota 1KD-FTV (3.0L D-4D DOHC 16V)2006-2015
Toyota HiluxToyota 1KD-FTV (3.0L D-4D DOHC 16V)2006-2016
Toyota FortunerToyota 1KD-FTV (3.0L D-4D DOHC 16V)2006-2015
Toyota HiAceToyota 1KD-FTV (3.0L D-4D DOHC 16V)2007-2017
04

Technical Specifications

SpecificationValue
INJECTOR TYPECommon Rail Injector
SYSTEM PLATFORMCRI
CONTROL VALVECore Spec
NOZZLE CODECore Spec
🔗 Shared Nozzle (2 assemblies):095000-5600
OPERATING PRESSURECore Spec
05

Installation Tips

  1. Thoroughly ream and clean carbon debris from the injector bore and cylinder head seat.
  2. Install a brand-new genuine copper sealing washer (Toyota 11176-30011, 1.5mm thickness).
  3. Replace the nozzle seat O-ring (96721-19017) and lubricate with clean engine oil.
  4. Slide the injector vertically into the cylinder head bore without rocking.
  5. Torque injector hold-down clamp bolt to: 28 N·m (20.6 lb-ft).
  6. Hand-thread high-pressure fuel pipe union nut, then torque to: 32 N·m (23.6 lb-ft).
  7. Torque leak-off return pipe banjo union bolt to: 13 N·m (9.6 lb-ft).
Tips & Warnings:
  • Confirm fitment against the vehicle EPC for the listed Toyota 1KD-FTV (3.0L D-4D DOHC 16V) applications before installing the common-rail diesel injector.
  • Tighten the mounting/hold-down to 28 N·m and the high-pressure line to 32 N·m.
  • Verify part number 095000-7760 and cross references 0950007760, 2367030300, 2367030410, 2367030280, 2367039215, and 2367039365 before ordering.
06

Frequently Asked Questions

QWhich Toyota Land Cruiser Prado and Hilux models use Denso injector 095000-7760?

Denso 095000-7760 is specifically engineered for the Toyota 1KD-FTV (3.0L D-4D 16V) common rail diesel engine. It fits Toyota Land Cruiser Prado 120 and 150 (KDJ120, KDJ150), Toyota Hilux 3.0 D-4D (KUN26, KUN16), Fortuner 3.0 (KUN51), and HiAce 3.0 D-4D (KDH201, KDH221) from 2006 to 2016.

QWhat are the genuine Toyota OE part numbers for Denso 095000-7760?

The genuine Toyota part numbers are 23670-30300, 23670-30410, and 23670-30280, with aftermarket reference DCRI107760. These feature the Denso DLLA145P870 nozzle and operate up to 1,600 bar rail pressure.

QWhy is ECU QR coding crucial when replacing 095000-7760 on 1KD-FTV engines?

Each 095000-7760 injector has a 30-digit Denso QR calibration code laser-etched on its solenoid head. Registering this code into the Toyota engine ECM via Toyota Techstream or compatible scan tool is essential. Skipping registration causes cylinder compensation imbalances, knocking combustion noise, and increased piston thermal stress.

QWhat is the hold-down clamp torque and copper washer spec for Toyota 1KD-FTV?

Torque the hold-down clamp bolt to 28 N·m. Always install genuine Toyota heat-resistant copper washers (part number 11176-26010 / 11176-30011). Reusing old washers on 1KD-FTV engines causes combustion blow-by past the injector seat, leading to oil sludging and catastrophic oil pickup screen blockage.

07

Diagnostic Trouble Codes & Fault Protocols

Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:

P0087Critical

Fuel Rail/System Pressure Too Low

P0093Critical

Fuel System Leak Detected - Large Leak

P0200Critical

Fuel Injector Circuit Malfunction (General / Common Driver Stage)

P0201Critical

Injector Circuit Malfunction - Cylinder 1

P0300Critical

Random or Multiple Cylinder Misfire Detected

P0202High

Cylinder 2 Injector Circuit Malfunction / Open Circuit

08

Cross-Reference & Compatibility

Sister parts, same-platform variants, and known incompatibilities.

Technical Diagnostic & Service Protocols

Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.

Workshop Diagnostic Protocol

Common Rail Injector Back-Leak Testing Guide

Common rail injector backleak test protocol. Graduated cylinder setup, warm idle & cranking limits in mL/min, control valve wear & P0087 diagnosis.

Read Technical Protocol
ECU Calibration Protocol

Bosch IMA Injector Coding & Location Guide

Bosch common rail injector IMA coding guide. Locate laser-etched 6-9 digit codes on body, ECU OBD2 adaptation steps & test bench calibration facts.

Read Technical Protocol
COMMON RAIL DIESEL WORKSHOP SOP

Stuck Injector Removal & Carbon Cleaning SOP | FuelPartsDB

Comprehensive workshop SOP for stuck diesel injector removal, pneumatic vibro-puller extraction, carbon solvent softening, and seat reaming without damage.

Read Technical Protocol
ASSEMBLY & INSTALLATION PROTOCOL

Diesel Injector Torque Specs & TTY Angles Guide

Common rail diesel injector hold-down bolt torque specs, TTY angles & pipe unions. Covers Bosch, Detroit DD13, Cummins & VAG 2.0 TDI workshop data in Nm.

Read Technical Protocol