Catalog / DENSO / 095000-6240
DENSO

Denso 095000-6240

View Specs
SolenoidDenso Common Rail System (CRS)Euro 4

Injector Nissan Navara 2.5 dCi YD25

Reference data for DENSO 095000-6240 common rail injector · OEM 16600-EB300, 16600-EB70A, 16600-EB70B, 16600-EB70C, 16600-EB70D, 16600-EC00A, 16600-EC00B, 16600-EC00D, 16600-EC00E, 16600-VM00A, 16600-VM00D, DCRI106240 · Application Nissan YD25DDTi (2.5L dCi DOHC 16V)
OE REFERENCE16600-EB300, 16600-EB70A, 16600-EB70B, 16600-EB70C, 16600-EB70D, 16600-EC00A, 16600-EC00B, 16600-EC00D, 16600-EC00E, 16600-VM00A, 16600-VM00D, DCRI106240
CONTROL VALVEPLATE
NOZZLEDLLA152P947
EMISSIONEuro 4
WARRANTY12 Months
01

Product Overview

WORKSHOP NOTICEECU Calibration / IMA Coding Required

This injector requires 6-8 digit calibration code programming (IMA / QR code) into the vehicle ECU (using Bosch KTS, Lexia/Diagbox or equivalent diagnostic equipment) following replacement to balance cylinder fuel delivery and prevent DTC P0300 misfire codes.

The Denso 095000-6240 (Nissan factory OE 16600-EB300, 16600-EC00E, 16600-EB70A, 16600-VM00A, and aftermarket trade reference DCRI106240) is an electro-hydraulic common rail diesel injector engineered specifically for the Nissan YD25DDTi 2.5L dCi 16-valve DOHC turbocharged engine. Rated for operating injection pressures up to 1,800 bar (26,100 psi), this injector powers hundreds of thousands of Nissan Navara D40 utility pickups, Pathfinder R51 4WD SUVs, Cabstar light commercial trucks, and Urvan commercial vans worldwide.

Before You Order

Always verify the OE reference 16600EB300, 16600EB70A, 16600EB70B, 16600EB70C stamped on your existing injector body before ordering; confirm the engine code and injector part number on the unit body both match your vehicle before unsealing the packaging. 095000-6240 needs its calibration code transferred after fitting; read the code from the new unit and program it with a compatible diagnostic tool.

Technical references: OEM service documentation, manufacturer catalogs, and field repair data.
02

Compatible Injectors

Primary
OEM Ref
OE Nozzle
03

Vehicle & Engine Fitment

VehicleEngineYears
Nissan Navara (D40)Nissan YD25DDTi (2.5L dCi DOHC 16V)2005-2015
Nissan Pathfinder (R51)Nissan YD25DDTi (2.5L dCi DOHC 16V)2005-2015
Nissan Cabstar (F24)Nissan YD25DDTi (2.5L dCi DOHC 16V)2006-2013
Nissan Urvan (E25)Nissan YD25DDTi (2.5L dCi DOHC 16V)2007-2012
04

Technical Specifications

SpecificationValue
INJECTOR TYPECommon Rail Injector
SYSTEM PLATFORMCRI
CONTROL VALVECore Spec
NOZZLE CODECore Spec
🔗 Shared Nozzle (3 assemblies):095000-5471326-4700
OPERATING PRESSURECore Spec
05

Installation Tips

  1. Remove all carbon buildup from the cylinder head injector sleeve and copper washer seat.
  2. Install a brand-new genuine copper sealing washer (Nissan 16626-EB300, 1.5mm thickness).
  3. Fit a new rubber valve cover injector oil seal (Nissan 13276-BN300) and lubricate with engine oil.
  4. Seat the injector straight into the cylinder head bore without forcing the clamp fork.
  5. Torque injector hold-down clamp bolt to: 28 N·m (20.6 lb-ft / 2.9 kgf·m).
  6. Hand-start high-pressure pipe flare nuts, then torque to: 32 N·m (23.6 lb-ft).
  7. Torque fuel return spill rail banjo bolt to: 15 N·m (11 lb-ft).
Tips & Warnings:
  • Tighten the injector mounting / hold-down to 28 N·m and the high-pressure line to 32 N·m.
  • Verify fitment for Nissan Navara (D40) 2005-2015, Nissan Pathfinder (R51) 2005-2015, Nissan Cabstar (F24) 2006-2013, and Nissan Urvan (E25) 2007-2012 before ordering.
  • Check the old injector part number against 095000-6240 and cross references 0950006240, 16600EB300, 16600EB70A, 16600EB70B, 16600EB70C, and 16600EB70D.
06

Frequently Asked Questions

QWhich vehicles and engine does this injector fit?

This common-rail diesel injector is listed for the Nissan YD25DDTi (2.5L dCi DOHC 16V) engine family and a system pressure of 1800 bar. Listed fitment is Nissan Navara (D40) 2005-2015, Nissan Pathfinder (R51) 2005-2015, Nissan Cabstar (F24) 2006-2013, and Nissan Urvan (E25) 2007-2012.

QWhat fault codes are listed for this injector?

The diagnostic trouble codes listed for this common-rail diesel injector are P0300, P0301, P0087, P0302, and P0304. Confirm the actual fault path on the vehicle before replacing parts.

QDoes this injector require coding, can the seals be reused, and what service life should I expect?

Coding/adaptation requirements, seal reuse, and expected service life are not stated in the verified facts. Confirm all three against the vehicle's EPC before installation.

QHow can I verify the old part matches this listing?

Check the old injector's part number against 095000-6240 and cross references 0950006240, 16600EB300, 16600EB70A, 16600EB70B, 16600EB70C, and 16600EB70D. If the markings do not match, confirm fitment against the vehicle's EPC before ordering.

07

Diagnostic Trouble Codes & Fault Protocols

Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:

P0087Critical

Fuel Rail/System Pressure Too Low

P0200Critical

Fuel Injector Circuit Malfunction (General / Common Driver Stage)

P0201Critical

Injector Circuit Malfunction - Cylinder 1

P0300Critical

Random or Multiple Cylinder Misfire Detected

P0202High

Cylinder 2 Injector Circuit Malfunction / Open Circuit

P0203High

Cylinder 3 Injector Circuit Malfunction / Open Circuit

Technical Diagnostic & Service Protocols

Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.

Workshop Diagnostic Protocol

Common Rail Injector Back-Leak Testing Guide

Common rail injector backleak test protocol. Graduated cylinder setup, warm idle & cranking limits in mL/min, control valve wear & P0087 diagnosis.

Read Technical Protocol
ECU Calibration Protocol

Bosch IMA Injector Coding & Location Guide

Bosch common rail injector IMA coding guide. Locate laser-etched 6-9 digit codes on body, ECU OBD2 adaptation steps & test bench calibration facts.

Read Technical Protocol
COMMON RAIL DIESEL WORKSHOP SOP

Stuck Injector Removal & Carbon Cleaning SOP | FuelPartsDB

Comprehensive workshop SOP for stuck diesel injector removal, pneumatic vibro-puller extraction, carbon solvent softening, and seat reaming without damage.

Read Technical Protocol
ASSEMBLY & INSTALLATION PROTOCOL

Diesel Injector Torque Specs & TTY Angles Guide

Common rail diesel injector hold-down bolt torque specs, TTY angles & pipe unions. Covers Bosch, Detroit DD13, Cummins & VAG 2.0 TDI workshop data in Nm.

Read Technical Protocol