Catalog / DENSO / 095000-5471
DENSO

095000-5471

View Specs
SolenoidDenso Common Rail System (CRS)Euro 4

Denso Isuzu 4HK1 Injector 8 97329703 4 Specs

Reference data for DENSO 095000-5471 common rail injector · OEM 8-97329703-4, 8-97329703-1, 8-97329703-2, 8-97329703-3, 8-97329703-0, 095000-5470, 095000-5472, 095000-5473, 095000-5474, 095000-8901, 095000-8902, 095000-8903 · Application Isuzu 4HK1 (5.2L) & 6HK1 (7.8L) Electronic Common Rail
OE REFERENCE8-97329703-4, 8-97329703-1, 8-97329703-2, 8-97329703-3, 8-97329703-0, 095000-5470, 095000-5472, 095000-5473, 095000-5474, 095000-8901, 095000-8902, 095000-8903
CONTROL VALVEPLATE 29# / DENSO G2 VALVE PLATE
NOZZLEDLLA152P947
EMISSIONEuro 4
WARRANTY12 Months
01

Product Overview

WORKSHOP NOTICEECU Calibration / IMA Coding Required

This injector requires 6-8 digit calibration code programming (IMA / QR code) into the vehicle ECU (using Bosch KTS, Lexia/Diagbox or equivalent diagnostic equipment) following replacement to balance cylinder fuel delivery and prevent DTC P0300 misfire codes.

The DENSO 095000-5471 is an authentic original-equipment G2 common rail diesel fuel injector engineered specifically for Isuzu 4HK1 (4-cylinder, 5.2-liter) and 6HK1 (6-cylinder, 7.8-liter) turbocharged electronically controlled diesel engines. Meeting EPA Tier 3 and EU Stage IIIA non-road industrial emissions standards, this injector is the core combustion component deployed across Hitachi ZAXIS ZX200-3, ZX210-3, ZX240-3, ZX270-3, and ZX330-3 crawler excavators, Sumitomo SH200-5/SH240-5 excavators, Case CX210B/CX240B excavators, and Isuzu Forward medium-duty transport trucks. Operating at rail pressures up to 1800 bar (26,100 psi) delivered by Denso HP3/HP4 high-pressure fuel supply pumps, this injector incorporates a calibrated DLLA152P947 multi-hole nozzle (Denso part number 093400-9470) and a hardened Plate 29# electro-hydraulic spool control valve to achieve precise micro-pilot, main, and split post-injection cycles. Denso part number 095000-5471 supersedes previous production revisions 095000-5470, 095000-5472, 095000-5473, and 095000-5474, and corresponds directly to Isuzu OEM genuine part numbers 8-97329703-1, 8-97329703-2, 8-97329703-3, and 8-97329703-4 (clean format 8973297034). Universal aftermarket remanufactured part numbers include 095000-8901, 095000-8902, and 095000-8903. Each individual unit carries unique micro-flow calibration data encoded into a 30-character alphanumeric QR matrix; programming this code into the ECM with an Isuzu E-IDSS diagnostic scanner ensures exact cylinder balancing, optimized hydraulic cycle response, and maximum fuel efficiency across demanding earthmoving duty cycles.

Before You Order

CRITICAL WORKSHOP NOTICE: Always photograph or manually record the 30-digit Denso QR Compensation Code laser-etched onto the injector solenoid cap BEFORE installation. Once the injector is lowered into the cylinder head, this calibration code cannot be read. Denso 095000-5471 (Isuzu OEM 8-97329703-4) is the primary electro-hydraulic G2 common rail injector powering Isuzu 4HK1 (5.2L) and 6HK1 (7.8L) Tier 3 / Stage IIIA diesel engines in Hitachi ZAXIS ZX200-3, ZX240-3, and ZX330-3 excavators. Tighten the injector hold-down clamp bolt to 30 N·m (22 lb·ft) and the high-pressure fuel feed line nut to 30 N·m (22 lb·ft). Writing the 30-digit QR code into the engine ECM via Isuzu E-IDSS or Techstream diagnostic software is mandatory to avoid severe idle vibration, cylinder contribution imbalances, and black smoke under hydraulic load.

Technical references: OEM service documentation, manufacturer catalogs, and field repair data.
02

Compatible Injectors

Primary
OEM Ref
Aftermarket
OE Nozzle
03

Vehicle & Engine Fitment

VehicleEngineYears
Hitachi ZAXIS ZX200 / ZX200LC (Gen.3)4HK1 / 6HK12006-2015
Hitachi ZAXIS (ZX240-3 / ZX250-3)4HK1 / 6HK12006-2015
Hitachi ZAXIS ZX270-3 Crawler Excavator4HK1 / 6HK12006-2015
Hitachi ZAXIS (ZX330-3 / ZX350-3)4HK1 / 6HK12006-2015
Sumitomo SH200-5 / SH210-5 / SH240-54HK1 / 6HK12006-2015
Case CX210B / CX240B4HK1 / 6HK12007-2016
JCB JS200 / JS210 / JS2204HK1 / 6HK12006-2014
Isuzu Forward / FTR / FVR4HK1 / 6HK12005-2016
04

Technical Specifications

SpecificationValue
SKU095000-5471
BrandDENSO
TypeG2 Common Rail Fuel Injector
OE Number8-97329703-4, 8-97329703-1, 8-97329703-2, 8-97329703-3, 095000-5470
Injection SystemDenso Common Rail System (CRS ECD-U2 / G2)
Operating PressureCore Spec
Torque Spec30 N·m
Hold Down Torque30 N·m
Warranty12 Months
Emission StandardEPA Tier 3 / EU Stage IIIA
Engine FamilyIsuzu 4HK1 & 6HK1 (5.2L & 7.8L)
Coding RequiredYes (Denso 30-Digit QR Compensation Code / Isuzu E-IDSS)
05

Installation Tips

Tools needed: Calibrated torque wrench (10-60 N·m range), Isuzu E-IDSS or Techstream diagnostic scan tool with J2534 VCI, Denso QR code reader or smartphone camera, Injector bore reamer and seat cleaning brush set, Lint-free industrial workshop swabs, Clean engine oil or assembly lubricant for O-rings, High-pressure fuel line socket (17 mm flare nut wrench), Compressed air line with rubber nozzle

  1. Before installation, photograph or transcribe the 30-digit alphanumeric Denso QR Compensation Code laser-engraved on the upper solenoid housing of each injector.
  2. Clean and inspect the cylinder head injector bore down to the copper sealing washer seat using a brass cleaning brush and specialized seat reamer.
  3. Blow out any loose carbon debris, rust particles, and cleaning fluid residue from the cylinder bore and the hold-down bolt hole using regulated compressed air.
  4. Install a brand-new, genuine Isuzu/Denso copper sealing washer onto the injector tip. Never reuse old washers and never install double washers.
  5. Apply a light film of clean engine oil to the new rubber O-ring mounted on the injector body to prevent pinching, tearing, or displacement during insertion.
  6. Carefully insert the injector into the cylinder head bore, rotating slightly until the nozzle locates into the combustion chamber and the hold-down clamp aligns correctly.
  7. Install the injector hold-down clamp and bolt. Tighten the clamp bolt evenly to an initial snug torque of 15 N·m, then apply the final torque of 30 N·m (22 lb·ft).
  8. Hand-thread the high-pressure fuel line sleeve nut onto the injector inlet fitting to ensure thread alignment, then torque the line nut to 30 N·m (22 lb·ft).
  9. Connect the injector solenoid electrical harness terminals and tighten the terminal retaining nuts to 2.5 N·m (22 lb·in); do not overtighten.
  10. Connect the diagnostic scanner, select Isuzu 4HK1/6HK1 engine management, navigate to Injector QR Code / Trim Data programming, and input the 30-digit calibration string for each cylinder.
  11. Prime the low-pressure fuel system via the manual priming pump on the fuel filter base until firm resistance is felt, then start the engine and verify zero fuel leaks at 1800 bar operating rail pressure.
Tips & Warnings:
  • Verify the old unit’s part number and cross references 0950005471, 8973297034, 8973297031, 8973297032, 8973297033, and 8973297030 before ordering.
  • Tighten the mounting/hold-down and high-pressure line to 30 N·m.
  • Read and record DTCs P0300, P0301, P0302, P0304, and P0087 before diagnosis.
06

Frequently Asked Questions

QWhich engines and machines is part number 095000-5471 listed for?

It is a common-rail diesel injector listed for Isuzu 4HK1 (5.2L) and 6HK1 (7.8L) Electronic Common Rail applications. Fitment covers Hitachi ZAXIS ZX200/ZX200LC (Gen.3), ZX240-3/ZX250-3, ZX270-3, and ZX330-3/ZX350-3 (2006-2015), plus Sumitomo SH200-5/SH210-5/SH240-5 (2006-2015). Confirm the specific machine and engine against the vehicle’s EPC before ordering.

QWhat system pressure and torque values apply to this injector?

The listed system pressure is 1800 bar. The mounting/hold-down torque is 30 N·m, and the high-pressure line torque is 30 N·m.

QHow do I verify that the old injector is the correct part?

Check for part number 095000-5471 and the cross references 0950005471, 8973297034, 8973297031, 8973297032, 8973297033, and 8973297030. If the markings do not match, confirm fitment against the vehicle’s EPC instead of guessing.

QDoes this injector need coding or adaptation after installation?

Coding and adaptation requirements are not stated in the verified facts. They must be confirmed against the vehicle’s EPC instead of guessing.

07

Diagnostic Trouble Codes & Fault Protocols

Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:

P0002Critical

Fuel Volume Regulator Control Circuit Range / Performance (VCV / IMV)

P0087Critical

Fuel Rail/System Pressure Too Low

P0200Critical

Fuel Injector Circuit Malfunction (General / Common Driver Stage)

P0201Critical

Injector Circuit Malfunction - Cylinder 1

P0251Critical

Injection Pump Fuel Metering Control 'A' Malfunction (Cam/Rotor/Injector)

P0252Critical

Injection Pump Fuel Metering Control 'A' Range/Performance

08

Cross-Reference & Compatibility

Sister parts, same-platform variants, and known incompatibilities.

Technical Diagnostic & Service Protocols

Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.

Workshop Diagnostic Protocol

Common Rail Injector Back-Leak Testing Guide

Common rail injector backleak test protocol. Graduated cylinder setup, warm idle & cranking limits in mL/min, control valve wear & P0087 diagnosis.

Read Technical Protocol
ECU Calibration Protocol

Bosch IMA Injector Coding & Location Guide

Bosch common rail injector IMA coding guide. Locate laser-etched 6-9 digit codes on body, ECU OBD2 adaptation steps & test bench calibration facts.

Read Technical Protocol
COMMON RAIL DIESEL WORKSHOP SOP

Stuck Injector Removal & Carbon Cleaning SOP | FuelPartsDB

Comprehensive workshop SOP for stuck diesel injector removal, pneumatic vibro-puller extraction, carbon solvent softening, and seat reaming without damage.

Read Technical Protocol
ASSEMBLY & INSTALLATION PROTOCOL

Diesel Injector Torque Specs & TTY Angles Guide

Common rail diesel injector hold-down bolt torque specs, TTY angles & pipe unions. Covers Bosch, Detroit DD13, Cummins & VAG 2.0 TDI workshop data in Nm.

Read Technical Protocol