Denso 095000-6310
Injector Komatsu 6271 11 3100 PC200 8
6271-11-3100, 6271-11-3101, 6271-11-3102, 095000-6311, 095000-6312, 095000-6313, DCRI106310PLATEDLLA152P8791600 bar peak rail pressureProduct Overview
The Denso 095000-6310 (Komatsu OEM 6271-11-3100, superseded by 6271-11-3101, and Denso revisions 095000-6311 / 6312) is an electro-hydraulic common rail diesel injector specifically calibrated for the Komatsu SAA6D107E-1 (6.69L) and SAA4D107E-1 (4.46L) Tier 3 / Stage IIIA earthmoving machinery engine family. Operating under fuel pressures up to 1,600 bar (23,200 psi), this injector is standard factory equipment on thousands of Komatsu PC200-8, PC220-8 excavators, WA250/320 wheel loaders, and D51 crawler dozers operating in severe heavy-duty duty cycles worldwide.
Always verify the OE reference 6271113100, 6271113101, 6271113102, 0950006311 stamped on your existing injector body before ordering; confirm the engine code and injector part number on the unit body both match your vehicle before unsealing the packaging. 095000-6310 needs its calibration code transferred after fitting; read the code from the new unit and program it with a compatible diagnostic tool.
Vehicle & Engine Fitment
| Vehicle | Engine | Years |
|---|---|---|
| Komatsu PC200-8 / PC220-8 / PC270-8 | Cummins ISB / QSB 6.7L (ISDe / Komatsu SAA6D107E) | 2006-2017 |
| Komatsu WA200-6 / WA250-6 / WA320-6 | Cummins ISB / QSB 6.7L (ISDe / Komatsu SAA6D107E) | 2006-2016 |
| Komatsu Crawler Dozers (D39-22 / D51-22) | Cummins ISB / QSB 6.7L (ISDe / Komatsu SAA6D107E) | 2008-2016 |
Technical Specifications
| Specification | Value |
|---|---|
| INJECTOR TYPE | Common Rail Injector |
| SYSTEM PLATFORM | CRI |
| CONTROL VALVECore Spec | |
| NOZZLE CODECore Spec | |
| OPERATING PRESSURECore Spec |
Installation Tips
- Fit new copper sealing washer (Komatsu 6754-11-3140, 1.5mm) onto nozzle tip.
- Slide injector into cylinder head bore; apply light finger pressure.
- Pre-install the side fuel connector tube (quill tube) and hand-tighten retaining nut.
- Torque injector hold-down clamp bolt to: 34 N·m (25.1 lb-ft).
- Torque fuel connector tube retaining nut to: 50 N·m (36.9 lb-ft).
- Connect high-pressure fuel line and torque collar nut to: 35 N·m (25.8 lb-ft).
- Torque leak-off return pipe banjo bolt to: 15 N·m (11.1 lb-ft).
- Tighten the injector mounting/hold-down fasteners to 34 N·m.
- Tighten the high-pressure line connection to 35 N·m.
- Confirm part number 095000-6310 and the listed cross references before ordering or fitting.
Frequently Asked Questions
What Komatsu construction excavators and engines use Denso injector 095000-6310?
Denso 095000-6310 is calibrated for Komatsu SAA6D107E-1 (6.7L, 6-cylinder) turbocharged common rail engines. It is standard equipment on Komatsu PC200-8, PC200LC-8, PC220-8, PC220LC-8, PC240LC-8 excavators, WA200-6 and WA250-6 wheel loaders, and D39EX-22 bulldozers from 2006 to 2017.
What are the Komatsu OEM cross-reference part numbers for Denso 095000-6310?
The genuine Komatsu part numbers are 6271-11-3100 and superseded number 6271-11-3101, corresponding to Denso revisions 095000-6311 and 095000-6312. These part numbers share the DLLA152P879 nozzle specification.
How is the Denso 095000-6310 coded into the Komatsu engine controller?
Input the 30-digit alpha-numeric QR compensation data stamped on the injector connector into the engine controller using the Komatsu Diagnostic Tool (K-Doc). This aligns high-pressure injection timing maps and ensures smooth fuel metering across 1,600 bar operating pressure.
What tightening torque is required for Komatsu PC200-8 injector hold-down bolts?
Torque the injector clamp mounting bolt to 34 N·m. Ensure the nozzle projection protrusion through the cylinder head matches factory spec (1.6 to 1.8 mm) using the standard 1.5 mm copper washer.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.