Catalog / DENSO / 095000-6360
DENSO

Denso 095000-6360

View Specs
SolenoidDenso Common Rail System (CRS)Euro 4

Injector John Deere RE530362 6068

Reference data for DENSO 095000-6360 common rail injector · OEM RE530362, RE531704, SE501926, DZ100216, 095000-6361, 095000-6362, 095000-6363, DCRI106360 · Application John Deere PowerTech Plus 4.5L / 6.8L (4045H / 6068H)
OE REFERENCERE530362, RE531704, SE501926, DZ100216, 095000-6361, 095000-6362, 095000-6363, DCRI106360
CONTROL VALVEPLATE
NOZZLEDLLA140P878
EMISSIONEuro 4
WARRANTY12 Months
01

Product Overview

WORKSHOP NOTICEECU Calibration / IMA Coding Required

This injector requires 6-8 digit calibration code programming (IMA / QR code) into the vehicle ECU (using Bosch KTS, Lexia/Diagbox or equivalent diagnostic equipment) following replacement to balance cylinder fuel delivery and prevent DTC P0300 misfire codes.

The Denso 095000-6360 (John Deere OEM RE530362, RE531704, factory remanufactured SE501926, and superseded by DZ100216) is a heavy-duty electro-hydraulic common rail diesel injector specifically calibrated for John Deere PowerTech Plus 4.5L (4045H) and 6.8L (6068H) Tier 3 / Stage IIIA agricultural, forestry, and heavy construction equipment engines. Calibrated to operate under injection pressures up to 1,600 bar (23,200 psi), this injector delivers optimized high-pressure fuel atomization, extreme-duty field durability, and strict particulate emission compliance.

Before You Order

Always verify the OE reference RE530362, RE531704, SE501926, DZ100216 stamped on your existing injector body before ordering; confirm the engine code and injector part number on the unit body both match your vehicle before unsealing the packaging. 095000-6360 needs its calibration code transferred after fitting; read the code from the new unit and program it with a compatible diagnostic tool.

Technical references: OEM service documentation, manufacturer catalogs, and field repair data.
02

Compatible Injectors

Primary
OEM Ref
OE Nozzle
03

Vehicle & Engine Fitment

VehicleEngineYears
John Deere 6030 Series / 7030 SeriesJohn Deere PowerTech Plus 4.5L / 6.8L (4045H / 6068H)2007-2016
John Deere S-Series Rotary Combines (S540/S550)John Deere PowerTech Plus 4.5L / 6.8L (4045H / 6068H)2011-2018
John Deere Self-Propelled High-Clearance Sprayers (4730 / 4830)John Deere PowerTech Plus 4.5L / 6.8L (4045H / 6068H)2008-2017
John Deere Wheeled Forestry Harvesters (1170E / 1270E)John Deere PowerTech Plus 4.5L / 6.8L (4045H / 6068H)2008-2016
04

Technical Specifications

SpecificationValue
INJECTOR TYPECommon Rail Injector
SYSTEM PLATFORMCRI
CONTROL VALVECore Spec
NOZZLE CODECore Spec
🔗 Shared Nozzle (2 assemblies):095000-6490
OPERATING PRESSURECore Spec
05

Installation Tips

  1. Clean the cylinder head injector bore with a brass brush to remove all carbon glaze.
  2. Install a brand-new genuine copper sealing washer (John Deere R519397, 1.5mm thickness).
  3. Carefully slide the injector vertically into the cylinder head bore without binding.
  4. Torque injector hold-down clamp bolt to: 37 N·m (27.3 lb-ft).
  5. Hand-thread high-pressure fuel supply line collar to ensure proper alignment.
  6. Torque high-pressure line delivery nut to: 35 N·m (25.8 lb-ft).
  7. Torque leak-off banjo return bolt to: 16 N·m (11.8 lb-ft).
Tips & Warnings:
  • Verify part number 095000-6360 and the listed cross references before ordering or fitting.
  • Torque the mounting/hold-down fasteners to 37 N·m and the high-pressure line to 35 N·m.
  • Confirm the 1600 bar common-rail system and the John Deere PowerTech Plus 4.5L / 6.8L (4045H / 6068H) application before installation.
06

Frequently Asked Questions

QWhich John Deere agricultural equipment uses Denso common rail injector 095000-6360?

Denso 095000-6360 is calibrated for John Deere PowerTech Plus 4.5L (4045H) and 6.8L (6068H) Tier 3 / Stage IIIA engines. It powers John Deere 6030 Premium (6430, 6830, 6930) and 7030 Large Frame (7430, 7530, 7730) tractors, S-Series combines (S540, S550), self-propelled sprayers (4730), and forestry harvesters from 2007 to 2016.

QWhat are the John Deere OEM reference numbers for Denso 095000-6360?

Genuine John Deere OEM part numbers are RE530362, RE531704, factory remanufactured SE501926, and updated superseded part DZ100216. These correspond directly to Denso assembly 095000-6360.

QHow do you program Denso 095000-6360 injectors into the John Deere engine ECU?

Use John Deere Service ADVISOR to input the 30-digit QR compensation code located on the upper injector housing into the Phoenix engine ECU. This calibrates micro-fuel delivery tolerances across pilot, main, and post-injection phases.

QWhat tightening torque is required for the hold-down clamp on John Deere 6068H engines?

Torque the injector hold-down clamp bolt to 37 N·m. Replace the copper washer with a new 1.5 mm sealing ring, lubricate the injector body O-ring with clean diesel fuel or assembly lube, and torque high-pressure rail pipe nuts to 35 N·m.

07

Diagnostic Trouble Codes & Fault Protocols

Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:

P0087Critical

Fuel Rail/System Pressure Too Low

P0200Critical

Fuel Injector Circuit Malfunction (General / Common Driver Stage)

P0201Critical

Injector Circuit Malfunction - Cylinder 1

P0300Critical

Random or Multiple Cylinder Misfire Detected

P0202High

Cylinder 2 Injector Circuit Malfunction / Open Circuit

P0203High

Cylinder 3 Injector Circuit Malfunction / Open Circuit

08

Cross-Reference & Compatibility

Sister parts, same-platform variants, and known incompatibilities.

Technical Diagnostic & Service Protocols

Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.

Workshop Diagnostic Protocol

Common Rail Injector Back-Leak Testing Guide

Common rail injector backleak test protocol. Graduated cylinder setup, warm idle & cranking limits in mL/min, control valve wear & P0087 diagnosis.

Read Technical Protocol
ECU Calibration Protocol

Bosch IMA Injector Coding & Location Guide

Bosch common rail injector IMA coding guide. Locate laser-etched 6-9 digit codes on body, ECU OBD2 adaptation steps & test bench calibration facts.

Read Technical Protocol
COMMON RAIL DIESEL WORKSHOP SOP

Stuck Injector Removal & Carbon Cleaning SOP | FuelPartsDB

Comprehensive workshop SOP for stuck diesel injector removal, pneumatic vibro-puller extraction, carbon solvent softening, and seat reaming without damage.

Read Technical Protocol
ASSEMBLY & INSTALLATION PROTOCOL

Diesel Injector Torque Specs & TTY Angles Guide

Common rail diesel injector hold-down bolt torque specs, TTY angles & pipe unions. Covers Bosch, Detroit DD13, Cummins & VAG 2.0 TDI workshop data in Nm.

Read Technical Protocol