Denso 095000-6490
Injector John Deere RE529118 6068
RE529118, RE546776, SE501925, RE524382, 095000-6491, 095000-6480, DCRI106490PLATEDLLA140P8781600 bar peak rail pressureProduct Overview
The Denso 095000-6490 (John Deere OEM RE529118, RE546776, factory remanufactured SE501925, superseded from RE524382) is a heavy-duty electro-hydraulic common rail diesel injector designed specifically for John Deere PowerTech Plus 4.5L (4045H) and 6.8L (6068H) Tier 3 / Stage IIIA agricultural, forestry, and construction machinery engines. Engineered to operate under rail pressures up to 1,600 bar (23,200 psi), this injector is critical for high-torque pulling power, fuel atomization efficiency, and strict particulate emission compliance in extreme field conditions.
Always verify the OE reference RE529118, RE546776, SE501925, RE524382 stamped on your existing injector body before ordering; confirm the engine code and injector part number on the unit body both match your vehicle before unsealing the packaging. 095000-6490 needs its calibration code transferred after fitting; read the code from the new unit and program it with a compatible diagnostic tool.
Vehicle & Engine Fitment
| Vehicle | Engine | Years |
|---|---|---|
| John Deere 6030 Series | John Deere PowerTech Plus 4.5L / 6.8L (4045H / 6068H) | 2006-2015 |
| John Deere 7030 Series | John Deere PowerTech Plus 4.5L / 6.8L (4045H / 6068H) | 2007-2014 |
| John Deere S-Series Combines | John Deere PowerTech Plus 4.5L / 6.8L (4045H / 6068H) | 2011-2017 |
| John Deere Forestry Skidders / Harvesters | John Deere PowerTech Plus 4.5L / 6.8L (4045H / 6068H) | 2007-2016 |
Technical Specifications
| Specification | Value |
|---|---|
| INJECTOR TYPE | Common Rail Injector |
| SYSTEM PLATFORM | CRI |
| CONTROL VALVECore Spec | |
| NOZZLE CODECore Spec | 🔗 Shared Nozzle (2 assemblies):095000-6360 |
| OPERATING PRESSURECore Spec |
Installation Tips
- Fit new copper sealing washer (R519397, 1.5mm) onto nozzle seat.
- Slide injector into cylinder head bore without tilting or binding.
- Tighten hold-down clamp bolt to: 37 N·m (27.3 lb-ft).
- Hand-thread high-pressure fuel supply line collar to ensure proper alignment.
- Torque high-pressure line delivery nut to: 35 N·m (25.8 lb-ft).
- Torque leak-off banjo return bolt to: 16 N·m (11.8 lb-ft).
- Before ordering, verify that part number 095000-6490 matches the listed John Deere engine family and machine series for the application using the vehicle's EPC or workshop manual.
- When fitting this common-rail diesel injector, confirm any coding or adaptation requirements against the vehicle's EPC or workshop manual rather than assuming plug-and-play.
- Use the listed fitment and part number 095000-6490 as the starting point, and confirm any seal-reuse or torque specifications against the vehicle's workshop data before reassembly.
Frequently Asked Questions
Which John Deere agricultural and forestry machines use Denso injector 095000-6490?
Denso 095000-6490 is specifically calibrated for John Deere PowerTech Plus 4.5L (4045H) and 6.8L (6068H) Tier 3 / Stage IIIA diesel engines. It fits John Deere 6030 and 7030 Series tractors (e.g. 6430, 6830, 7430, 7530), S-Series combines (S540, S550), as well as forestry skidders (540H, 648H) and harvesters from 2006 to 2017.
What are the genuine John Deere OE part numbers corresponding to Denso 095000-6490?
Genuine John Deere OE numbers include RE529118, RE546776, factory remanufactured SE501925, and superseded reference RE524382. When replacing, verify the 10-digit Denso part number 095000-6490 or John Deere casting code stamped on the injector upper body.
Is QR coding required when installing Denso 095000-6490 on John Deere 6068H engines?
Yes. Each Denso 095000-6490 injector features a 30-digit alpha-numeric QR compensation code stamped on the top connector. This code must be written to the John Deere Level 14 / Phoenix ECU using John Deere Service ADVISOR diagnostic software to calibrate injection quantity offsets across all engine load stages.
What are the hold-down clamp torque specification and washer recommendations for 095000-6490?
Tighten the injector hold-down clamp bolt to 37 N·m. Always discard the old copper nozzle washer and install a genuine new 1.5 mm washer. Ensure the cylinder head bore is thoroughly reamed with a brass cleaning brush to prevent blow-by carbon accumulation and nozzle tip overheating.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.