Catalog / HYUNDAI / 35320-2E100
HYUNDAI

HYUNDAI 35320-2E100

View Specs
SolenoidGDI High-Pressure Fuel Pump (HPFP)Euro 6

High Pressure Fuel Pump Elantra Tucson Kona Kia Forte Soul 2.0L Nu GDI GDP208

Reference data for HYUNDAI 35320-2E100 high-pressure fuel pump · OEM GDP208, HM10048, HPP0029, 35320-2E101 · Application Hyundai Kia 2.0L 4-Cylinder DOHC Nu GDI (G4NC / G4NH)
OE REFERENCEGDP208, HM10048, HPP0029, 35320-2E101
CONTROL VALVE-
NOZZLE-
EMISSIONEuro 6
WARRANTY12 Months
01

Product Overview

The HYUNDAI 35320-2E100 is a precision automotive OE replacement component engineered specifically for Hyundai Kia 2.0L 4-Cylinder DOHC Nu GDI (G4NC / G4NH) powertrains. Designed to deliver consistent calibration and factory-specified fuel atomization, this unit restores original throttle response, diagnostic rail pressure stability, and emission compliance.

Before You Order

Verify the 35320-2E100 Continental VDO 150 bar high-pressure common-rail pump and application fitment before ordering; confirm the pump drive matches your engine before unsealing the packaging. No electronic code transfer is required after fitting.

Technical references: OEM service documentation, manufacturer catalogs, and field repair data.
02

Compatible Injectors

OEM Ref
03

Vehicle & Engine Fitment

VehicleEngineYears
Hyundai Elantra GT / Tucson (TL) / Kona / SonataG4NC / G4NH2014-2021
Kia Soul / Forte / Sportage (QL) / OptimaG4NC / G4NA2014-2021
04

Technical Specifications

SpecificationValue
part_number35320-2E100
oem_reference35320-2E100
manufacturerHYUNDAI
system_typeHigh Pressure Fuel Pump
pressure_rating150 bar (2175 psi)
operating_temperature-40°C to +135°C
flange_mount_torque11 N-m (97 lb-in)
high_pressure_line_torque27 N-m (20 lb-ft)
diagnostic_dtcP0087, P0088, P0171, P0300
05

Installation Tips

  1. Depressurize the fuel system before disconnecting any high-pressure lines.
  2. Clean the pump mounting area and line fittings to prevent contamination.
  3. Inspect the timing belt/chain or camshaft drive and remove old seal residue.
  4. Fit new seals and lubricate them only with clean engine oil.
  5. Install the high-pressure pump and align its drive with the timing belt/chain or camshaft.
  6. Reconnect the high-pressure lines and ensure all fittings are correctly seated.
  7. Prime the low-pressure fuel circuit and check all connections for leaks.
  8. Start the engine and verify rail pressure rises without leaks or abnormal noise.
Tips & Warnings:
  • Use new seals every time; keep the fuel circuit clean; prime the low-pressure circuit before starting; check for leaks at all high-pressure connections after installation.
06

Frequently Asked Questions

QWill part 35320-2E100 fit my Hyundai or Kia 2.0L GDI vehicle?

It is listed for the Hyundai Kia 2.0L 4-Cylinder DOHC Nu GDI engine family (G4NC / G4NH). Listed Hyundai fitment is Elantra GT, Tucson (TL), Kona, and Sonata [G4NC, G4NH] (2014-2021); listed Kia fitment is Soul, Forte, Sportage (QL), and Optima [G4NC, G4NA] (2014-2021). Confirm the exact vehicle against its EPC before ordering.

QWhat trouble codes or symptoms point to a failed high-pressure fuel pump 35320-2E100?

The verified diagnostic trouble codes for this pump listing are P0300, P0087, P0193, P0089, and P0191. No additional symptom details are stated in the verified facts; confirm diagnosis against the vehicle's EPC instead of guessing.

QWhat are the hold-down and high-pressure line torque specs, and can I reuse the seals?

The mounting / hold-down torque is 11 N·m, and the high-pressure line torque is 27 N·m; system pressure is 150 bar. Seal reuse is not stated in the verified facts, so it must be confirmed against the vehicle's EPC instead of guessing.

QDoes this pump require coding/adaptation, and how do I verify the old part?

Coding/adaptation requirements are not stated in the verified facts; confirm them against the vehicle's EPC instead of guessing. To verify the old pump, check for part number 35320-2E100 and cross references 353202E100, GDP208, HM10048, HPP0029, and 353202E101. If the numbers do not match, confirm fitment against the vehicle's EPC.

07

Diagnostic Trouble Codes & Fault Protocols

Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:

P0087Critical

Fuel Rail/System Pressure Too Low

P0088Critical

Fuel Rail/System Pressure Too High

P0089Critical

Fuel Pressure Regulator 1 Performance

P0191Critical

Fuel Rail Pressure Sensor 'A' Circuit Range/Performance

P0002High

Fuel Volume Regulator Control Circuit Range / Performance (VCV / IMV)

P0090High

Fuel Pressure Regulator 1 Control Circuit

08

Cross-Reference & Compatibility

Sister parts, same-platform variants, and known incompatibilities.

Technical Diagnostic & Service Protocols

Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.

COMMON RAIL WORKSHOP DIAGNOSTICS

Common Rail High-Pressure Pump Diagnostics Guide

Diagnose common rail high-pressure pump failure: suction vacuum, CP4 roller glitter, plunger wear, air ingress & P0087 hard start. Workshop bench testing.

Read Technical Protocol
COMMON RAIL WORKSHOP DIAGNOSTICS

Fuel Metering Valve (IMV/SCV) Diagnostics Guide

Diagnostic guide for common rail fuel metering valves (IMV/SCV/FCA/MPROP). Normally open vs closed, coil resistance, PWM duty cycle & P0088 / P0089 test.

Read Technical Protocol
OBD-II DIAGNOSTIC PROTOCOL

P0087 Low Rail Pressure Diagnosis Guide

Step-by-step workshop diagnostic protocol for OBD-II DTC P0087 (Fuel Rail Pressure Too Low). 5-stage troubleshooting tree: backleak testing, SCV valve, PRV valve, and high-pressure pump.

Read Technical Protocol
COMMON RAIL WORKSHOP DIAGNOSTICS

Rail Pressure Relief Valve Diagnostics Guide

Common rail pressure relief valve (PRV) testing guide. Diagnose hot start stalls, P0087 rail pressure loss, return line leakage & single vs 2-stage valves.

Read Technical Protocol