BOSCH A2820700001
High Pressure Fuel Pump Mercedes A Class CLA GLA GLB Renault Nissan 1.3 TCe 0261520443
16630-7214R, 16630-6F60A, 0261520443INTEGRATED HIGH-SPEED DIGITAL FLOW CONTROL VALVE-250 bar peak rail pressureProduct Overview
The Bosch A2820700001 (Bosch 0261520443) is a compact Bosch HDP5 mechanical high-pressure fuel pump shared by Mercedes-Benz M282 and Renault-Nissan H5Ht / HR13DDT 1.3L turbo engines. Applications include the Mercedes A-Class W177 A200 (2018-2023), Renault Megane IV 1.3 TCe (2018-2023) and Nissan Qashqai II 1.3 DIG-T (2018-2023). An exhaust camshaft eccentric drives the compact plunger to a 250 bar (25 MPa / 3625 psi) delivery pressure, with a digital metering valve measuring 9.5-12.0 Ω at 20°C. Flange Torx screws are tightened progressively to 10 N·m and the high-pressure pipe flare nut to 26 N·m. Codes P0087, P0088 and P0001 are listed for this fitment. Workshop notes call for clean flared pipe ends and a new intermediate sealing ring to prevent micro-leaks.
Always verify the OE reference 166307214R, 166306F60A stamped on your existing pump body before ordering; confirm the pump part number and drive coupling match your engine before unsealing the packaging. A2820700001 needs no ECU calibration coding; no code transfer is required after fitting.
Vehicle & Engine Fitment
| Vehicle | Engine | Years |
|---|---|---|
| Mercedes-Benz A-Class W177 A200 | 1.33L Turbo M282 120kW | 2018-2023 |
| Renault Megane IV 1.3 TCe | 1.3L TCe H5Ht 103kW | 2018-2023 |
| Nissan Qashqai II 1.3 DIG-T | 1.3L HR13DDT 118kW | 2018-2023 |
Technical Specifications
| Specification | Value |
|---|---|
| System Type | Bosch HDP5 Compact Mechanical High Pressure Fuel Pump |
| Operating PressureCore Spec | |
| Actuation Type | Exhaust camshaft eccentric cam profile driving compact plunger |
| Mounting Flange Bolt Torque | 10 N·m (flanged Torx screws tightened progressively) |
| High Pressure Pipe Torque | 26 N·m Flare Nut Connection |
| Solenoid Resistance | 9.5 - 12.0 Ω at 20°C (ECU digital metering valve) |
| Common Fault Codes | P0087 (Fuel Rail Pressure Too Low), P0088 (Rail Pressure Too High), P0001 (Fuel Volume Regulator Circuit) |
| Workshop Precaution | Clean high pressure pipe flared ends thoroughly; replace intermediate sealing ring to avoid micro-leaks |
Installation Tips
- Vent High Pressure Rail & Remove Engine Cover: Depressurize fuel injection system using diagnostic tool or fuel pump fuse isolation. Remove plastic acoustic engine top cover.
- Disconnect Fuel Delivery Lines & Solenoid Plug: Unplug electrical control valve connector. Disconnect low pressure fuel feed hose clamp and undo steel high pressure line union nut (26 N·m).
- Unfasten Mounting Bolts & Inspect Cam Tappet: Loosen mounting bolts (10 N·m) evenly in half-turn steps. Lift off pump and inspect camshaft follower bucket for scoring or excessive play.
- Install New O-Ring, Torque Fasteners & Verify Sealing: Install replacement O-ring with engine oil coating. Torque mounting bolts to 10 N·m. Tighten high pressure pipe to 26 N·m. Perform engine dry crank, start and inspect for leaks.
- Confirm the exact vehicle application against the EPC before ordering part number A2820700001.
- Check the workshop manual for coding, adaptation and fuel-system cleanliness requirements before installation.
- Follow the manufacturer’s installation procedure and do not assume the old unit can be reused without inspection.
Frequently Asked Questions
Will this pump fit my Mercedes-Benz, Renault or Nissan application?
Use part number A2820700001 and confirm your vehicle’s exact engine and application against the EPC or a trusted catalogue before ordering; the listing covers the Mercedes-Benz, Renault and Nissan applications shown for this pump.
What symptoms suggest the high-pressure fuel pump has failed?
The listing does not provide a symptom chart for this pump; have the vehicle diagnosed against its workshop manual, including stored faults and live fuel-system data, before replacing part number A2820700001.
What should I check before ordering this pump?
Confirm the vehicle application and engine against the EPC using part number A2820700001, check for any required coding or adaptation in the workshop manual, and inspect the fuel system for contamination before ordering.
Does the replacement pump need to be matched or adapted?
Coding or adaptation requirements are not stated for this listing; check the vehicle’s EPC or workshop manual for the required procedure before fitting part number A2820700001, and follow the manufacturer’s instructions.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.