Catalog / BOSCH / 16630-5NA0A
BOSCH

BOSCH 16630-5NA0A

View Specs
SolenoidGDI High-Pressure Fuel Pump (HPFP)Euro 5

High Pressure Fuel Pump Nissan Qashqai Renault Megane Mercedes A Class 1.3 TCe

Reference data for BOSCH 16630-5NA0A high-pressure fuel pump · OEM 166304561R, A2820700001, 2820700001, 0261520371, 0261520372 · Application Mercedes-Benz M282 / Renault-Nissan H5Ht HR13DDT (1.3L Turbo)
OE REFERENCE166304561R, A2820700001, 2820700001, 0261520371, 0261520372
CONTROL VALVEINTEGRATED PWM ELECTRIC SOLENOID FUEL METERING UNIT
NOZZLE-
EMISSIONEuro 5
WARRANTY12 Months
01

Product Overview

The 16630-5NA0A is an industrial-grade genuine Tier-1 replacement engineered for Renault-Nissan-Mercedes 1.3 TCe / H5Ht / HR13DDT / M282 Turbo. Designed for high-precision Alliance-Daimler High Pressure Direct Injection (250 bar GDI), it delivers factory calibration standards, OE cross-reference compatibility, and verified workshop reliability.

Before You Order

Always verify the OE reference 166304561R, A2820700001, 2820700001 stamped on your existing pump body before ordering; confirm the pump part number and drive coupling match your engine before unsealing the packaging. 16630-5NA0A needs no ECU calibration coding; no code transfer is required after fitting.

Technical references: OEM service documentation, manufacturer catalogs, and field repair data.
02

Compatible Injectors

Primary
OEM Ref
03

Vehicle & Engine Fitment

VehicleEngineYears
Nissan Qashqai J11 1.3 DIG-TMercedes-Benz M282 / Renault-Nissan H5Ht HR13DDT (1.3L Turbo)2018-2021
Renault Megane IV 1.3 TCeMercedes-Benz M282 / Renault-Nissan H5Ht HR13DDT (1.3L Turbo)2018-2024
Mercedes-Benz A-Class W177 A200Mercedes-Benz M282 / Renault-Nissan H5Ht HR13DDT (1.3L Turbo)2018-2024
04

Technical Specifications

SpecificationValue
ManufacturerRobert Bosch GmbH / Alliance Automotive
Pump FamilyBosch HDP-5 Compact Mechanical Radial Piston Pump
Maximum Fuel Pressure250 bar (25 MPa / 3625 psi) peak injection pressure
Drive MechanismCamshaft Follower Tappet Driven via Exhaust Camshaft
Mounting Flange Fastener Torque12 N·m M6 Bolts
High Pressure Pipe Nut Torque28 N·m Flare Nut
Diagnostic Trouble CodesP0087 (Fuel Rail Pressure Insufficient), P0088 (Rail Pressure Too High)
Common SymptomsLoss of engine power under boost, EPC warning light, limp home mode during overtaking
Operating PressureCore Spec
05

Installation Tips

  1. Depressurize High-Pressure Circuit: Disable fuel lift pump supply and crank engine until fuel pressure drops below 5 bar. Wear protective eyewear and gloves.
  2. Inspect Camshaft Follower Tappet: Unbolt pump and slide out roller follower tappet. Inspect contact face for scouring, thermal discoloration, or excessive free play.
  3. Rotate Engine to Base Cam Circle: Manually turn engine crankshaft until the HPFP cam lobe is oriented at its minimum lift position to allow stress-free pump installation.
  4. Fit New Viton Seal & Tighten Flange Bolts: Fit brand new Viton radial seal ring moistened with clean engine oil. Secure flange bolts progressively in crosswise steps to 12 N·m.
  5. Torque High Pressure Line Fitting: Hand-thread high-pressure line flare connection into pump outlet port. Torque flare nut securely to 28 N·m with a flare nut adapter.
Tips & Warnings:
  • Torque the high-pressure line to 28 N·m and confirm the part number 16630-5NA0A against the vehicle's EPC before installation.
  • Tighten the mounting/hold-down fasteners to 12 N·m on this 250 bar gasoline direct-injection high-pressure fuel pump.
  • Verify fitment against the listed Nissan Qashqai J11 1.3 DIG-T (2018-2021), Renault Megane IV 1.3 TCe (2018-2024), and Mercedes-Benz A-Class W177 A200 (2018-2024) applications before installation.
06

Frequently Asked Questions

QWhat vehicles use the 16630-5NA0A high pressure fuel pump?

It is fitted to the 1.3-litre turbocharged petrol engine co-developed by Renault, Nissan, and Mercedes-Benz (designated 1.3 TCe, HR13DDT, H5Ht, or M282). This includes Nissan Qashqai, Renault Megane/Kadjar, and Mercedes-Benz A-Class (W177), CLA, and GLA models.

QWhat causes fuel pressure failure on 1.3 TCe engines?

Thermal stress and high operating pressure (250 bar) can cause internal pressure regulator valve stickiness or plunger wear, triggering P0087 low rail pressure fault codes and emergency engine torque derating.

QWhat are the mounting torque specifications?

The cylinder head mounting bolts require 12 N·m. The high pressure steel line flare nut must be torqued to 28 N·m.

07

Diagnostic Trouble Codes & Fault Protocols

Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:

P0087Critical

Fuel Rail/System Pressure Too Low

P0088Critical

Fuel Rail/System Pressure Too High

P0089Critical

Fuel Pressure Regulator 1 Performance

P0191Critical

Fuel Rail Pressure Sensor 'A' Circuit Range/Performance

P0002High

Fuel Volume Regulator Control Circuit Range / Performance (VCV / IMV)

P0090High

Fuel Pressure Regulator 1 Control Circuit

08

Cross-Reference & Compatibility

Sister parts, same-platform variants, and known incompatibilities.

Technical Diagnostic & Service Protocols

Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.

COMMON RAIL WORKSHOP DIAGNOSTICS

Common Rail High-Pressure Pump Diagnostics Guide

Diagnose common rail high-pressure pump failure: suction vacuum, CP4 roller glitter, plunger wear, air ingress & P0087 hard start. Workshop bench testing.

Read Technical Protocol
COMMON RAIL WORKSHOP DIAGNOSTICS

Fuel Metering Valve (IMV/SCV) Diagnostics Guide

Diagnostic guide for common rail fuel metering valves (IMV/SCV/FCA/MPROP). Normally open vs closed, coil resistance, PWM duty cycle & P0088 / P0089 test.

Read Technical Protocol
OBD-II DIAGNOSTIC PROTOCOL

P0087 Low Rail Pressure Diagnosis Guide

Step-by-step workshop diagnostic protocol for OBD-II DTC P0087 (Fuel Rail Pressure Too Low). 5-stage troubleshooting tree: backleak testing, SCV valve, PRV valve, and high-pressure pump.

Read Technical Protocol
COMMON RAIL WORKSHOP DIAGNOSTICS

Rail Pressure Relief Valve Diagnostics Guide

Common rail pressure relief valve (PRV) testing guide. Diagnose hot start stalls, P0087 rail pressure loss, return line leakage & single vs 2-stage valves.

Read Technical Protocol