DENSO 23209-37010
Fuel Injector Toyota Prius Prius V Corolla Lexus CT200h 1.8L Hybrid 2ZR FXE 2ZR FAE 23250 37010 FJ1068
23250-37010, FJ1068, 842-12373, 23209-39145--4 bar peak rail pressureProduct Overview
The DENSO 23209-37010 is a precision automotive OE replacement component engineered specifically for Toyota 1.8L 4-Cylinder Hybrid DOHC (2ZR-FXE / 2ZR-FAE) powertrains. Designed to deliver consistent calibration and factory-specified fuel atomization, this unit restores original throttle response, diagnostic rail pressure stability, and emission compliance.
Always verify the OE reference 2325037010, FJ1068, 84212373, 2320939145 stamped on your existing injector body before ordering; confirm the engine code and injector part number on the unit body both match your vehicle before unsealing the packaging. 23209-37010 needs no ECU calibration coding; no code transfer is required after fitting.
Technical Specifications
| Specification | Value |
|---|---|
| part_number | 23209-37010 |
| oem_reference | 23209-37010 |
| manufacturer | DENSO |
| system_type | Fuel Injector |
| pressure_rating | 4 bar (58 psi) |
| operating_temperature | -40°C to +135°C |
| flange_mount_torque | 9 N-m (80 lb-in) |
| high_pressure_line_torque | 21 N-m (15 lb-ft) |
| diagnostic_dtc | P0300, P0301, P0171, P0172 |
Installation Tips
- Depressurize the fuel system completely via diagnostic scan tool or by removing the fuel pump fuse prior to line disassembly.
- Clean all surrounding bracket areas thoroughly using residue-free brake cleaner to prevent abrasive particulate ingress.
- Inspect the mechanical camshaft lobe and roller follower or clean injector bore seating surfaces before hardware alignment.
- Install component using fresh factory O-rings or Teflon combustion chamber seals lubricated only with clean motor oil.
- Torque mounting flange fasteners in alternating increments to 9 N-m (80 lb-in).
- Torque high-pressure hydraulic tube fittings using a calibrated flare nut wrench to 21 N-m (15 lb-ft).
- Prime low-pressure fuel circuit, cycle ignition key 3-4 times, and inspect for high-pressure hydraulic leaks before road test.
- Always replace single-use high-pressure metal fuel lines and micro-filter seals whenever disconnected.
- Verify camshaft driving lobe surfaces for scoring or flat spots before installing any mechanical pump.
- Reset long-term and short-term fuel trim adaptations via OBD-II diagnostic scanner after physical replacement.
Frequently Asked Questions
Will this multi-point (port) fuel injector fit my Toyota Prius, Corolla Hybrid, or Lexus CT200h?
This 23209-37010 multi-point (port) fuel injector is listed for Toyota Prius XW30/XW50 (2010-2022), Toyota Corolla Hybrid 1.8L (2015-2023), and Lexus CT200h ZWA10 (2011-2020) with the Toyota/Lexus 1.8L 2ZR-FE / 2ZR-FXE / 2ZR-FAE engine family. Confirm exact fitment for your VIN against the vehicle’s EPC before ordering.
What system pressure and torque values apply to this injector?
The listed system pressure is 4 bar. Mounting/hold-down torque is 9 N·m, and high-pressure line torque is 21 N·m.
Which diagnostic trouble codes are listed for this injector?
The listed DTCs are P0300, P0301, P0087, P0302, and P0304. No additional symptom or test data is stated in the verified facts, so confirm any diagnostic procedure against the vehicle’s EPC/manufacturer information.
How can I verify the old part number before ordering?
This listing’s part number is 23209-37010, and the cross references are 2320937010, 2325037010, FJ1068, 84212373, 2320939145, and 232090T020. Match those numbers to the old unit and confirm the final application against the vehicle’s EPC.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.