BOSCH 06M906036P
High Pressure Fuel Injector Audi S4 S5 RS4 RS5 Porsche 2.9T 3.0T EA839 0261500478
06M906036AE, 0261500478, 0261500479LASER-DRILLED MICRO-ORIFICE SOLENOID VALVE-250 bar peak rail pressureProduct Overview
The Bosch 06M906036P (Bosch 0261500478) is a Bosch HDEV6 multi-hole solenoid direct gasoline injector for Audi and Porsche EA839 2.9L BiTurbo and 3.0L V6 TFSI engines (CWGD / DECA). It is listed for the Audi S4 / S5 B9 (2017-2023), RS4 / RS5 B9 (2018-2023) and Porsche Panamera 971 (2017-2023). System operating pressure reaches 250 bar (25 MPa / 3625 psi), with a precision laser-drilled multi-orifice spray targeting the combustion bowl and coil resistance of 1.3-1.6 Ω at 20°C. The flanged retaining bolt is specified at 10 N·m and the high-pressure pipe flare nut at 25 N·m. Common codes are P0300, P0301-P0306 and P0172 / P0175. The combustion chamber Teflon sealing ring must be calibrated with a sizing tool before insertion.
Always verify the OE reference 06M906036AE stamped on your existing injector body before ordering; confirm the engine code and injector part number on the unit body both match your vehicle before unsealing the packaging. 06M906036P needs no ECU calibration coding; no code transfer is required after fitting.
Technical Specifications
| Specification | Value |
|---|---|
| System Type | Bosch HDEV6 Multi-Hole Solenoid Direct Gasoline Fuel Injector |
| Operating PressureCore Spec | |
| Spray Pattern | Precision laser-drilled multi-orifice targeting combustion bowl |
| Fuel Rail Bolt Torque | 10 N·m (flanged retaining bolt) |
| High Pressure Pipe Torque | 25 N·m Flare Nut Connection |
| Coil Resistance | 1.3 - 1.6 Ω at 20°C (High-speed Peak & Hold excitation) |
| Common Fault Codes | P0300 (Random Misfire), P0301-P0306 (Cylinder Misfire), P0172 / P0175 (System Rich) |
| Workshop Precaution | Combustion chamber Teflon sealing ring must be calibrated with sizing tool before cylinder head insertion |
Matched High-Pressure Fuel Pump (Fuel Circuit Assembly)
Operates on the same high-pressure rail circuit. When troubleshooting low rail pressure (DTC P0087), verify pump volumetric delivery before replacing injectors.
Installation Tips
- Depressurize High Pressure Fuel Circuit: Disconnect low pressure electric fuel pump controller or pull fuse. Run engine until it stalls to vent high pressure fuel rail.
- Remove Charge Air Ducting & Fuel Rail Retainers: Unbolt hot-V intake charge pipe components. Disconnect electrical harnesses and remove fuel rail retaining bolts (10 N·m).
- Extract Injectors & Renew Teflon Chamber Seals: Use puller tool T10133 to extract injectors from cylinder head. Fit new Teflon combustion seal and backing washer with assembly cone.
- Reinstall Rail & Torque Connections to Spec: Seat injectors into head. Torque rail bolts evenly to 10 N·m. Tighten high pressure lines to 25 N·m. Cycle ignition and verify zero fuel weepage.
- Verify connector condition and seal fitment before installing 06M906036P.
- Use the vehicle’s workshop data for torque and pressure checks.
- After replacement, confirm coding or adaptation and leak-free operation against the workshop manual.
Frequently Asked Questions
What does 06M906036P fit?
06M906036P fits the listed Audi S/RS applications and Porsche Panamera applications with the specified Audi/Porsche engine family; confirm the exact vehicle details against the EPC or workshop manual before ordering.
What are common symptoms of a failed injector?
Symptoms can include misfire, rough running, poor cold start, fuel smell, or an injector-related fault code; confirm the diagnosis with the vehicle’s workshop data before replacing 06M906036P.
What should I check before ordering?
Check the exact engine and application against the EPC, inspect the connector and seal condition, and confirm the existing injector is 06M906036P; confirm seal and coding requirements in the workshop manual.
Must the replacement injector be matched or adapted?
Coding or adaptation requirements are not stated here; confirm whether matching is required against the vehicle’s workshop manual or EPC before installing 06M906036P.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.