Continental VDO A2C59513596
Common Rail Diesel Injector
LR002473, LR002475, LR0008832, LR0008834--1600 bar peak rail pressureProduct Overview
The Continental VDO (Siemens VDO) A2C59513596 is a common-rail diesel injector for the Land Rover Range Rover Sport (L320) and Discovery 3 (L319) with the 3.6 TDV8 (368DT) engine. OE references: LR002473, LR002475, LR0008832, LR0008834. VDO code: 5WS40253.
Verify VDO 6-Hex IIC calibration code and OEM cross reference before installation.
Vehicle & Engine Fitment
| Vehicle | Engine | Years |
|---|---|---|
| Land Rover Range Rover Sport (L320) | 3.6 TDV8 (368DT) | — |
| Land Rover Discovery 3 (L319) | 3.6 TDV8 (368DT) | — |
Technical Specifications
| Specification | Value |
|---|---|
| SKU | A2C59513596 |
| Brand | CONTINENTAL |
| Fuel System | Continental / VDO Common Rail |
| Operating PressureCore Spec | |
| Hold Down Torque | 28 N·m |
| High-Pressure Line Torque | 28 N·m |
| Coding Required | VDO 6-Hex IIC |
| Emission Standard | Euro 5 |
| Injector Type | Piezoelectric |
Installation Tips
- Depressurize And Isolate: Depressurize the fuel system and isolate it from all energy sources before opening any high-pressure connection; wait until the system is fully depressurized and secure the work area against accidental start-up.
- Clean And Disconnect: Clean the surrounding area of the cylinder head and injector bore before work, then disconnect the electrical connector and the spill/leak-off connections from the injector; keep removed connections clean and protected.
- Remove High-Pressure Line: Remove the high-pressure line from the injector and cap or protect the line and injector ports immediately to prevent dirt ingress; do not bend or stress the line during removal.
- Extract Old Injector: Release the hold-down and extract the old unit without twisting it; keep the piezo injector straight because it is bending-sensitive, and check the injector seat before fitting the replacement, following the manufacturer's service information for any additional sealing or damping components.
- Clean Bore And Fit Seals: Clean the injector bore and seat carefully, remove all residue without damaging sealing surfaces, fit new seals, and seat the unit straight in the bore, following the manufacturer's service information for component orientation.
- Tighten Hold-Down And Reconnect Line: Tighten the hold-down to 28 N·m, then reconnect the high-pressure line to the injector and tighten the line fitting to 28 N·m; keep the line aligned and free from side load.
- Calibration Coding: Record the VDO 6-Hex IIC calibration code and program it with a compatible diagnostic tool.
- Leak-Check And Start-Up: After coding, run the engine through a leak-check procedure and inspect all high-pressure connections and the injector seat for leaks; correct any leak before start-up, then start the engine and confirm smooth operation.
- Confirm part number A2C59513596 and cross references LR002473, LR002475, LR0008832, LR0008834, and 5WS40253 before fitting.
- Tighten the injector mounting/hold-down to 28 N·m.
- Tighten the high-pressure line to 28 N·m.
Frequently Asked Questions
Will this injector fit my Range Rover Sport or Discovery 3?
It is listed for the 3.6 TDV8 (368DT) engine family, including Land Rover Range Rover Sport (L320) 3.6 TDV8 (368DT) and Land Rover Discovery 3 (L319) 3.6 TDV8 (368DT). Confirm the vehicle details against the EPC before ordering.
Which diagnostic trouble codes are listed for this injector application?
The listed diagnostic trouble codes are P0300, P0087, P0201, P0204, and P0202. Use these as diagnostic references and confirm the actual fault on the vehicle.
What torque should I use for the injector hold-down and high-pressure line?
Tighten the mounting/hold-down torque to 28 N·m and the high-pressure line torque to 28 N·m. This common-rail diesel injector is listed for a 1600 bar system pressure.
How do I verify the old injector and check whether coding is required?
Compare the old unit against part number A2C59513596 and cross references LR002473, LR002475, LR0008832, LR0008834, and 5WS40253. Coding/adaptation requirements are not stated in the verified facts, so confirm them against the vehicle's EPC instead of guessing.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.