Catalog / DELPHI / EJBR03201D
DELPHI

Delphi EJBR03201D

View Specs
SolenoidDelphi Common Rail SystemEuro 3

common rail injector

Reference data for DELPHI EJBR03201D common rail injector · OEM 1112010-E06, 1112010E06 · Application GW2.8TC, 2.8 TC
OE REFERENCE1112010-E06, 1112010E06
CONTROL VALVE28239294
NOZZLEL154PRD
EMISSIONEuro 3
WARRANTY12 Months
01

Product Overview

WORKSHOP NOTICEECU Calibration / IMA Coding Required

This injector requires 6-8 digit calibration code programming (IMA / QR code) into the vehicle ECU (using Bosch KTS, Lexia/Diagbox or equivalent diagnostic equipment) following replacement to balance cylinder fuel delivery and prevent DTC P0300 misfire codes.

The Delphi EJBR03201D is an authentic common rail diesel injector calibrated for Great Wall Hover H3 and GW2.8TC engine applications. Operating at an engineered rail pressure of 1400 bar, this solenoid assembly features the precision 28239294 control valve and L154PRD nozzle. Mandatory ECU calibration requires programming the cylinder-specific C2i 16-digit hexadecimal code into the engine control unit to establish smooth delivery balance and Euro 3 emissions compliance. Typical failure symptoms include control valve erosion causing excessive back-leakage, rail pressure deficit (DTC P0087), and erratic cold-start idling. Overhauling necessitates clean room assembly and genuine replacement seals.

Before You Order

Verify Delphi C2i/C3i calibration code and OEM cross reference before installation.

Technical references: OEM service documentation, manufacturer catalogs, and field repair data.
02

Compatible Injectors

OEM Ref
OE Nozzle
03

Vehicle & Engine Fitment

VehicleEngineYears
Great Wall Hover H32.8 TC (GW2.8TC)2006-2010
Great Wall Wingle 32.8 TC (GW2.8TC)2006-2011
04

Technical Specifications

SpecificationValue
SKUEJBR03201D
BrandDELPHI
Fuel SystemCommon Rail (Delphi DFI)
Operating PressureCore Spec
Control ValveCore Spec
🔗 Shared Valve (40 assemblies):EJBR02901DEJBR03101DEJBR03301DEJBR03401D
Nozzle CodeCore Spec
Hold Down Torque32 N·m
High-Pressure Line Torque30 N·m
Coding RequiredYes
Emission StandardEuro 3
05

Installation Tips

  1. Depressurize And Clean: Depressurize the fuel system and isolate it according to the workshop procedure, then clean the surrounding area of the injector bore and the cylinder head before opening any connection.
  2. Disconnect Connections: Disconnect the electrical connector and the spill/return connection from the injector, then plug or cover all exposed ports and fittings to prevent dirt ingress.
  3. Remove High-Pressure Line: Remove the high-pressure line from the injector inlet, cap or plug the line and the injector port immediately, and keep the line ends clean.
  4. Extract Old Unit: Release and remove the hold-down device, extract the old injector from the bore, and remove any old seals without damaging the cylinder head or injector bore.
  5. Clean Bore And Seat: Clean the injector bore and seat in the cylinder head, remove carbon and debris, inspect the sealing surfaces, and keep the area covered until the new injector is ready.
  6. Fit Seals And Seat Unit: Fit new seals to the injector, seat the unit in the injector bore, tighten the hold-down to 32 N·m, then reconnect the high-pressure line and tighten it to 30 N·m; reconnect the electrical connector and spill connection.
  7. Calibration Coding: Record the 20-digit Delphi C2i/C3i calibration code and program it with a suitable diagnostic tool.
  8. Leak-Check And Start-Up: Leak-check the high-pressure line and injector connections, start the engine, and inspect for fuel leaks and abnormal running; stop the engine if any leak is found.
Tips & Warnings:
  • Verify the part number EJBR03201D or the listed cross references EJBR02801D, 1112010-E06, or 1112010E06 before fitting.
  • Use 32 N·m for the mounting/hold-down torque.
  • Use 30 N·m for the high-pressure line torque.
06

Frequently Asked Questions

QWill this injector fit my Great Wall Hover H3 or Wingle 3 2.8 TC?

It is listed for Great Wall Hover H3 2.8 TC (GW2.8TC) 2006-2010 and Great Wall Wingle 3 2.8 TC (GW2.8TC) 2006-2011. Confirm your exact vehicle against its EPC before ordering.

QWhat torque values should I use when installing this injector?

Use 32 N·m for the mounting/hold-down torque and 30 N·m for the high-pressure line torque. The stated system pressure for this common-rail diesel injector is 1400 bar. No other torque values are stated in the verified facts; confirm any additional values against the vehicle's EPC.

QWhich diagnostic trouble codes are listed for this injector?

The listed diagnostic trouble codes are P0300, P0087, P0201, P0204, and P0202. Any additional diagnostic criteria are not stated in the verified facts and must be confirmed against the vehicle's EPC.

QDoes this injector need coding or adaptation after installation?

Coding or adaptation requirements are not stated in the verified facts. Confirm them against the vehicle's EPC before installation.

07

Diagnostic Trouble Codes & Fault Protocols

Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:

P0087Critical

Fuel Rail/System Pressure Too Low

P0201High

Injector Circuit Malfunction - Cylinder 1

P0202High

Cylinder 2 Injector Circuit Malfunction / Open Circuit

P0203High

Cylinder 3 Injector Circuit Malfunction / Open Circuit

P0204High

Cylinder 4 Injector Circuit Malfunction / Open Circuit

P0300High

Random or Multiple Cylinder Misfire Detected

Technical Diagnostic & Service Protocols

Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.

Workshop Diagnostic Protocol

Common Rail Injector Back-Leak Testing Guide

Common rail injector backleak test protocol. Graduated cylinder setup, warm idle & cranking limits in mL/min, control valve wear & P0087 diagnosis.

Read Technical Protocol
ECU Calibration Protocol

Bosch IMA Injector Coding & Location Guide

Bosch common rail injector IMA coding guide. Locate laser-etched 6-9 digit codes on body, ECU OBD2 adaptation steps & test bench calibration facts.

Read Technical Protocol
COMMON RAIL DIESEL WORKSHOP SOP

Stuck Injector Removal & Carbon Cleaning SOP | FuelPartsDB

Comprehensive workshop SOP for stuck diesel injector removal, pneumatic vibro-puller extraction, carbon solvent softening, and seat reaming without damage.

Read Technical Protocol
ASSEMBLY & INSTALLATION PROTOCOL

Diesel Injector Torque Specs & TTY Angles Guide

Common rail diesel injector hold-down bolt torque specs, TTY angles & pipe unions. Covers Bosch, Detroit DD13, Cummins & VAG 2.0 TDI workshop data in Nm.

Read Technical Protocol