Delphi EJBR03101D
common rail injector
8200421359, 8200421897, 16600-00Q0H28239294L153PRD1600 bar peak rail pressureProduct Overview
The Delphi EJBR03101D is an authentic common rail diesel injector calibrated for Renault Clio III and K9K engine applications. Operating at an engineered rail pressure of 1600 bar, this solenoid assembly features the precision 28239294 control valve and L153PRD nozzle. Mandatory ECU calibration requires programming the cylinder-specific C2i 16-digit hexadecimal code into the engine control unit to establish smooth delivery balance and Euro 4 emissions compliance. Typical failure symptoms include control valve erosion causing excessive back-leakage, rail pressure deficit (DTC P0087), and erratic cold-start idling. Overhauling necessitates clean room assembly and genuine replacement seals.
Verify Delphi C2i/C3i calibration code and OEM cross reference before installation.
Technical Specifications
| Specification | Value |
|---|---|
| SKU | EJBR03101D |
| Brand | DELPHI |
| Fuel System | Common Rail (Delphi DFI) |
| Operating PressureCore Spec | |
| Control ValveCore Spec | |
| Nozzle CodeCore Spec | |
| Hold Down Torque | 30 N·m |
| High-Pressure Line Torque | 28 N·m |
| Coding Required | Yes |
| Emission Standard | Euro 4 |
Installation Tips
- Depressurize And Clean: Depressurize the fuel system and isolate it according to the workshop procedure, then clean the surrounding area of the injector bore and the cylinder head before opening any connection.
- Disconnect Connections: Disconnect the electrical connector and the spill/return connection from the injector, then plug or cover all exposed ports and fittings to prevent dirt ingress.
- Remove High-Pressure Line: Remove the high-pressure line from the injector inlet, cap or plug the line and the injector port immediately, and keep the line ends clean.
- Extract Old Unit: Release and remove the hold-down device, extract the old injector from the bore, and remove any old seals without damaging the cylinder head or injector bore.
- Clean Bore And Seat: Clean the injector bore and seat in the cylinder head, remove carbon and debris, inspect the sealing surfaces, and keep the area covered until the new injector is ready.
- Fit Seals And Seat Unit: Fit new seals to the injector, seat the unit in the injector bore, tighten the hold-down to 30 N·m, then reconnect the high-pressure line and tighten it to 28 N·m; reconnect the electrical connector and spill connection.
- Calibration Coding: Record the 20-digit Delphi C2i/C3i calibration code and program it with a suitable diagnostic tool.
- Leak-Check And Start-Up: Leak-check the high-pressure line and injector connections, start the engine, and inspect for fuel leaks and abnormal running; stop the engine if any leak is found.
- Confirm fitment against the vehicle's EPC before installation.
- Tighten the mounting/hold-down to 30 N·m and the high-pressure line to 28 N·m.
- Observe the 1600 bar system pressure when working on the common-rail injector.
Frequently Asked Questions
Does this injector fit my vehicle?
EJBR03101D is a common-rail diesel injector listed for Renault Clio III 1.5 dCi (K9K 724) 2005-2012, Renault Modus 1.5 dCi (K9K 724) 2004-2012, and Dacia Logan MCV 1.5 dCi (K9K 724) 2006-2012. It is for the K9K/K9K 724 engine family, and the listed cross references are EJBR05102D, 8200421359, 8200421897 and 16600-00Q0H. Confirm fitment against the vehicle's EPC before ordering.
What fault codes can help diagnose this injector?
The supplied diagnostic trouble codes are P0300, P0087, P0302, P0201 and P0204. Use proper diagnostics and confirm any other fault or symptom against the vehicle's EPC rather than guessing.
Does this injector require coding or adaptation after fitting?
Coding or adaptation requirements are not stated in the supplied facts, so they must be confirmed against the vehicle's EPC instead of guessing. Do not assume either way.
How do I verify the old injector before ordering a replacement?
Check the old unit for part number EJBR03101D and compare it with the listed cross references EJBR05102D, 8200421359, 8200421897 and 16600-00Q0H. Also confirm the K9K/K9K 724 application against the vehicle's EPC.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.