Denso 095000-8900
Injector Kubota 1J770 53051 V3307
1J770-53050, 1J770-53051, 1J770-53070, 1J770-53052, 095000-8901, 095000-8902, 095000-8903, DCRI108900PLATEG3S331800 bar peak rail pressureProduct Overview
The Denso 095000-8900 (Kubota OEM 1J770-53050, 1J770-53051, 1J770-53070, and 1J770-53052) is a high-precision Denso G3 electro-hydraulic common rail diesel injector calibrated for Kubota V3307-CR-TE4 (3.3L) and V3800-CR-TE4 (3.8L) Tier 4 Interim / Tier 4 Final industrial and agricultural engines. Operating at injection pressures up to 1,800 bar (26,100 psi), this injector is standard factory equipment across Kubota M-Series tractors, SVL compact track loaders, KX excavators, and numerous Bobcat skid steer platforms.
Always verify the OE reference 1J77053050, 1J77053051, 1J77053070, 1J77053052 stamped on your existing injector body before ordering; confirm the engine code and injector part number on the unit body both match your vehicle before unsealing the packaging. 095000-8900 needs its calibration code transferred after fitting; read the code from the new unit and program it with a compatible diagnostic tool.
Technical Specifications
| Specification | Value |
|---|---|
| INJECTOR TYPE | Common Rail Injector |
| SYSTEM PLATFORM | CRI |
| CONTROL VALVECore Spec | |
| NOZZLE CODECore Spec | |
| OPERATING PRESSURECore Spec |
Installation Tips
- Always discard the old copper sealing washer; install new washer (1J770-53620, 1.5mm).
- Lightly lubricate the body O-ring with clean diesel fuel or assembly lubricant.
- Insert injector into cylinder head bore and seat by hand pressure only.
- Torque injector hold-down clamp bolt to: 26 N·m (19.2 lb-ft).
- Align high-pressure fuel line to prevent cross-threading and tighten collar nut to: 30 N·m (22.1 lb-ft).
- Torque leak-off return pipe banjo bolt to: 14 N·m (10.3 lb-ft).
- Verify part number 095000-8900 and the listed cross references against the vehicle’s EPC before fitting.
- Tighten the injector mounting/hold-down to 26 N·m and the high-pressure line to 30 N·m with a calibrated torque wrench.
- Confirm fitment to the listed Kubota V3307/V3800 (3.3L & 3.8L CR-TE4), Kubota M-Series (2010-2022), Kubota SVL/KX080 (2011-2022), and Bobcat S-Series/T-Series Loaders (S185/T190/S630/T650) (2011-2018) applications via the EPC before installation.
Frequently Asked Questions
Which Kubota and Bobcat compact machines use Denso injector 095000-8900?
Denso 095000-8900 is engineered for Kubota V3307-CR-TE4 (3.3L) and V3800-CR-TE4 (3.8L) common rail diesel engines. It powers Kubota M-Series tractors (M6040, M7040, M8540, M9540), Kubota SVL75 and SVL90 compact track loaders, KX080 excavators, and Bobcat skid steers and track loaders (S630, S650, T630, T650) from 2010 to 2022.
What genuine Kubota part numbers correspond to Denso 095000-8900?
The direct Kubota OEM part numbers are 1J770-53050, 1J770-53051, 1J770-53070, and 1J770-53052. All these references designate the same Denso G3 electro-hydraulic common rail injector with nozzle code G3S33.
Does Denso 095000-8900 require ECU registration on Kubota V3307 engines?
Yes. Denso G3 common rail injectors require entering the 30-digit alpha-numeric QR compensation code into the engine control unit via Kubota Diagmaster or Bobcat Service Software. Failure to register the QR code causes injection volume mismatch, rough idling, and premature DPF soot loading.
What torque spec and sealing washer must be used when replacing 095000-8900?
The hold-down clamp bolt must be torqued to 26 N·m. Always seat a genuine 1.5 mm heat-treated copper washer (Kubota 1J770-53620) beneath the injector tip and clean the seat bore down to bare metal. Never reuse copper washers.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.