Catalog / DENSO / 095000-6640
DENSO

Denso 095000-6640

View Specs
SolenoidDenso Common Rail System (CRS)Euro 4

Injector Toyota 23670 0L050 2KD FTV

Reference data for DENSO 095000-6640 common rail injector · OEM 23670-0L050, 23670-09330, 23670-09070, 23670-30220, 23670-39185, 23670-39275, DCRI106640 · Application Toyota 2KD-FTV (2.5L D-4D DOHC 16V)
OE REFERENCE23670-0L050, 23670-09330, 23670-09070, 23670-30220, 23670-39185, 23670-39275, DCRI106640
CONTROL VALVEPLATE
NOZZLEDLLA155P863
EMISSIONEuro 4
WARRANTY12 Months
01

Product Overview

WORKSHOP NOTICEECU Calibration / IMA Coding Required

This injector requires 6-8 digit calibration code programming (IMA / QR code) into the vehicle ECU (using Bosch KTS, Lexia/Diagbox or equivalent diagnostic equipment) following replacement to balance cylinder fuel delivery and prevent DTC P0300 misfire codes.

The Denso 095000-6640 (Toyota OE 23670-0L050, 23670-09330, 23670-09070, 23670-30220, and Denso aftermarket reference DCRI106640) is a heavy-duty electro-hydraulic common rail diesel injector engineered for the Toyota 2KD-FTV 2.5L D-4D 16-valve turbocharged engine. Operating at system rail pressures up to 1,600 bar (23,200 psi), this injector supplies precise pilot, main, and post-injection events across millions of Toyota Hilux Vigo utility pickups, HiAce commercial vans, Fortuner SUVs, and Innova multi-purpose vehicles globally.

Before You Order

Always verify the OE reference 236700L050, 2367009330, 2367009070, 2367030220 stamped on your existing injector body before ordering; confirm the engine code and injector part number on the unit body both match your vehicle before unsealing the packaging. 095000-6640 needs its calibration code transferred after fitting; read the code from the new unit and program it with a compatible diagnostic tool.

Technical references: OEM service documentation, manufacturer catalogs, and field repair data.
02

Compatible Injectors

Primary
OEM Ref
OE Nozzle
03

Vehicle & Engine Fitment

VehicleEngineYears
Toyota HiluxToyota 2KD-FTV (2.5L D-4D DOHC 16V)2004-2016
Toyota HiAceToyota 2KD-FTV (2.5L D-4D DOHC 16V)2004-2016
Toyota FortunerToyota 2KD-FTV (2.5L D-4D DOHC 16V)2005-2015
Toyota InnovaToyota 2KD-FTV (2.5L D-4D DOHC 16V)2004-2015
04

Technical Specifications

SpecificationValue
INJECTOR TYPECommon Rail Injector
SYSTEM PLATFORMCRI
CONTROL VALVECore Spec
NOZZLE CODECore Spec
OPERATING PRESSURECore Spec
05

Installation Tips

  1. Ream and clean carbon deposits from the cylinder head injector bore and bottom seat.
  2. Install a brand-new genuine copper sealing washer (Toyota 11176-30011, 1.5mm thickness).
  3. Fit a new nozzle seat O-ring (Toyota 96721-19017) coated with clean engine oil.
  4. Lower the injector straight into the bore without twisting or binding against the clamp.
  5. Torque the injector hold-down clamp bolt to: 30 N·m (22 lb-ft / 306 kgf·cm).
  6. Hand-thread high-pressure fuel pipe flare nuts, then torque to: 32 N·m (23.6 lb-ft).
  7. Torque leak-off return rail banjo bolt to: 13 N·m (9.6 lb-ft).
Tips & Warnings:
  • Verify the old injector against part number 095000-6640 or the listed cross references before ordering.
  • Tighten the injector mounting / hold-down to 30 N·m.
  • Tighten the high-pressure line to 32 N·m.
06

Frequently Asked Questions

QWill this common-rail diesel injector fit my Toyota?

It is listed for the Toyota 2KD-FTV (2.5L D-4D DOHC 16V) engine family and fitment for Toyota Hilux (2004-2016), Toyota HiAce (2004-2016), Toyota Fortuner (2005-2015), and Toyota Innova (2004-2015). Cross references include 0950006640, 236700L050, 2367009330, 2367009070, 2367030220, and 2367039185. Confirm the exact application against the vehicle's EPC before ordering.

QWhat is the listed system pressure and what torque values apply to this injector?

The listed system pressure is 1600 bar. The mounting / hold-down torque is 30 N·m, and the high-pressure line torque is 32 N·m. Use these listed values for the injector installation.

QWhich diagnostic trouble codes are associated with this injector?

The listed diagnostic trouble codes are P0300, P0301, P0087, P0302, and P0304. Use these codes as diagnostic references only and confirm any additional diagnosis against the vehicle's EPC instead of guessing.

QDo I need coding or adaptation after fitting this injector?

No coding or adaptation requirement is stated in the supplied facts for this injector. Confirm coding/adaptation requirements against the vehicle's EPC before fitting rather than guessing.

07

Diagnostic Trouble Codes & Fault Protocols

Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:

P0087Critical

Fuel Rail/System Pressure Too Low

P0200Critical

Fuel Injector Circuit Malfunction (General / Common Driver Stage)

P0201Critical

Injector Circuit Malfunction - Cylinder 1

P0300Critical

Random or Multiple Cylinder Misfire Detected

P0202High

Cylinder 2 Injector Circuit Malfunction / Open Circuit

P0203High

Cylinder 3 Injector Circuit Malfunction / Open Circuit

08

Cross-Reference & Compatibility

Sister parts, same-platform variants, and known incompatibilities.

Technical Diagnostic & Service Protocols

Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.

Workshop Diagnostic Protocol

Common Rail Injector Back-Leak Testing Guide

Common rail injector backleak test protocol. Graduated cylinder setup, warm idle & cranking limits in mL/min, control valve wear & P0087 diagnosis.

Read Technical Protocol
ECU Calibration Protocol

Bosch IMA Injector Coding & Location Guide

Bosch common rail injector IMA coding guide. Locate laser-etched 6-9 digit codes on body, ECU OBD2 adaptation steps & test bench calibration facts.

Read Technical Protocol
COMMON RAIL DIESEL WORKSHOP SOP

Stuck Injector Removal & Carbon Cleaning SOP | FuelPartsDB

Comprehensive workshop SOP for stuck diesel injector removal, pneumatic vibro-puller extraction, carbon solvent softening, and seat reaming without damage.

Read Technical Protocol
ASSEMBLY & INSTALLATION PROTOCOL

Diesel Injector Torque Specs & TTY Angles Guide

Common rail diesel injector hold-down bolt torque specs, TTY angles & pipe unions. Covers Bosch, Detroit DD13, Cummins & VAG 2.0 TDI workshop data in Nm.

Read Technical Protocol