BOSCH FT4Z-9350-A
High Pressure Fuel Pump Ford F 150 Edge Explorer Lincoln MKX 2.7L 3.0L EcoBoost GDP1009
FT4E-9D376-AA, GDP1009, HM10045, HPP0027, 217-3452--200 bar peak rail pressureProduct Overview
The BOSCH FT4Z-9350-A is a precision automotive OE replacement component engineered specifically for Ford 2.7L & 3.0L V6 EcoBoost Twin-Turbo Nano DOHC powertrains. Designed to deliver consistent calibration and factory-specified fuel atomization, this unit restores original throttle response, diagnostic rail pressure stability, and emission compliance.
Confirm part number FT4Z-9350-A (Continental VDO high-pressure common-rail pump) and the listed Ford/Lincoln 2.7L & 3.0L EcoBoost application match your vehicle before ordering; verify the pump body, drive coupling, connector and line fittings match the existing unit. Fit new seals and prime the fuel circuit after installation.
Technical Specifications
| Specification | Value |
|---|---|
| part_number | FT4Z-9350-A |
| oem_reference | FT4Z-9350-A |
| manufacturer | BOSCH |
| system_type | High Pressure Fuel Pump |
| pressure_rating | 200 bar (2900 psi) |
| operating_temperature | -40°C to +135°C |
| flange_mount_torque | 10 N-m (89 lb-in) |
| high_pressure_line_torque | 30 N-m (22 lb-ft) |
| diagnostic_dtc | P0087, P0088, P0171, P0174 |
Matched High-Pressure Fuel Injectors (Fuel Circuit Assembly)
Directly supplied by this high-pressure pump. Verify injector backleak balance if rail pressure fails to build during engine cranking.
Installation Tips
- Depressurize the fuel system and disconnect the battery before disassembly.
- Clean the pump mounting area and cap open fuel lines to prevent contamination.
- Remove the old high-pressure pump and inspect the drive coupling and camshaft or timing drive.
- Install the new high-pressure pump with new seals and confirm the drive engages correctly.
- Reconnect the high-pressure fuel line and pump connectors securely.
- Prime the fuel circuit according to the service procedure before starting.
- Start the engine, verify rail pressure builds correctly, and check for fuel leaks.
- Use clean, fuel-system-safe tools and cap open connections to prevent debris ingress.
- Always fit new seals; never reuse old seals.
- Confirm the pump drive type, timing belt/chain or camshaft, matches the engine before installation.
- Prime the fuel circuit and check for leaks before road test.
- Do not reuse drained fuel; dispose of it according to local regulations.
- Replace the pump as a complete unit if the drive coupling or housing is damaged.
Frequently Asked Questions
Will this pump fit my Ford or Lincoln with the listed EcoBoost Nano Twin-Turbo engine?
It is listed for the Ford and Lincoln applications shown in the product fitment for the EcoBoost Nano Twin-Turbo engine. Confirm your exact application against the vehicle EPC before ordering.
What symptoms point to a failed high-pressure fuel pump?
Symptoms are not stated in the product information; diagnose with the vehicle’s workshop data and confirm fuel pressure behavior before replacing the pump.
What should I check before ordering this pump?
Check the vehicle’s exact engine application, original pump part number, connector and mounting arrangement, and any service procedures against the EPC or workshop manual. Confirm the listed FT4Z-9350-A application before ordering.
Does the replacement pump need to be matched or adapted?
Matching or adaptation requirements are not stated in the product information. Confirm coding, programming, and any relearn steps against the vehicle’s EPC or workshop manual for the listed FT4Z-9350-A application.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.