HITACHI 12692511
High Pressure Fuel Pump Chevrolet Silverado 1500 GMC Sierra 4.3L V6 LV3 EcoTec3 Gen V HM10043 HPP0027
12658481, 12641740, 12674508, HM10043, HPP0027, GDP114--150 bar peak rail pressureProduct Overview
The HITACHI 12692511 is a precision automotive OE replacement component engineered specifically for General Motors 4.3L V6 EcoTec3 LV3 (Small Block Gen V) powertrains. Designed to deliver consistent calibration and factory-specified fuel atomization, this unit restores original throttle response, diagnostic rail pressure stability, and emission compliance.
Confirm part number 12692511 (Continental VDO high-pressure common-rail pump), matching engine code LV3/L83/L84/L86/L87, and pump drive type before ordering or unsealing. Fit new seals during installation; do not reuse old seals.
Technical Specifications
| Specification | Value |
|---|---|
| part_number | 12692511 |
| oem_reference | 12692511 |
| manufacturer | HITACHI |
| system_type | High Pressure Fuel Pump |
| pressure_rating | 150 bar (2175 psi) |
| operating_temperature | -40°C to +135°C |
| flange_mount_torque | 10 N-m (89 lb-in) |
| high_pressure_line_torque | 30 N-m (22 lb-ft) |
| diagnostic_dtc | P0087, P0089, P0172, P0300 |
Matched High-Pressure Fuel Injectors (Fuel Circuit Assembly)
Directly supplied by this high-pressure pump. Verify injector backleak balance if rail pressure fails to build during engine cranking.
Installation Tips
- Depressurize the fuel system before disconnecting any fuel lines.
- Clean the pump mounting area and line connections to prevent contamination.
- Inspect the pump drive and mounting surfaces for wear or damage.
- Fit new seals and install the high-pressure pump with correct drive alignment.
- Connect the fuel lines and secure the pump mounting hardware.
- Prime the fuel circuit according to the service procedure.
- Check the fuel system for leaks before starting the engine.
- Use new seals and ensure the high-pressure pump drive is correctly aligned.
- Prime the fuel circuit and check for leaks before running the engine.
- The pump raises rail pressure; system pressure is 150 bar.
Frequently Asked Questions
Will part number 12692511 fit my Silverado/Sierra or related SUV?
Part 12692511 is listed for GM 4.3L V6 and 5.3L/6.2L EcoTec3 Gen V V8 engines (LV3/L83/L84/L86/L87). The listed fitment covers Chevrolet Silverado 1500, Tahoe, and Suburban plus GMC Sierra 1500 and Yukon for 2014-2021. Confirm the exact vehicle against its EPC before ordering.
How do I verify the old pump and what cross-reference numbers apply?
Compare the old unit's part number with 12692511 and the listed cross-references: 12692511, 12658481, 12641740, 12674508, HM10043, and HPP0027. If the number does not match, confirm the correct part against the vehicle's EPC rather than guessing.
What pressure and torque values do I need for installation?
The listed system pressure for this gasoline direct-injection high-pressure fuel pump is 150 bar. Mounting/hold-down torque is 10 N·m, and high-pressure line torque is 30 N·m. Use these listed values; any additional procedure must be confirmed in the vehicle's EPC.
What DTCs can be related to this high-pressure fuel pump?
The diagnostic trouble codes listed with this pump are P0300, P0087, P0193, P0089, and P0191. Use these codes only as listed diagnostic references and confirm the actual fault against the vehicle's EPC.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.