DENSO 23209-25010
High Pressure Fuel Injector Toyota Camry RAV4 Avalon 2.5L A25A FKS D 4S 297500 1580
23290-25010, 23209-F0010, 297500-1580HIGH-SPEED ELECTROMAGNETIC MULTI-HOLE MICRO NOZZLE-200 bar peak rail pressureProduct Overview
The Denso 23209-25010 (297500-1580) is a multi-hole direct gasoline injector for Toyota and Lexus 2.5L Dynamic Force D-4S engines (A25A-FKS / A25A-FXS). Applications include the Toyota Camry XV70 (2018-2024), RAV4 XA50 (2019-2024) and Lexus ES250 XZ10 (2021-2024). It delivers fuel at up to 200 bar (20 MPa / 2900 psi) through a laser-drilled multi-hole fan pattern targeted at intake tumble flow, with coil resistance of 1.7-2.1 Ω at 20°C. Flanged holding bracket bolts are specified at 21 N·m and the high-pressure pipe flare nut at 32 N·m. P0300, P0301-P0304 and P0171 are the common codes listed for this fitment. Fit a new blue Teflon combustion chamber seal ring using an expansion mandrel and calibration collar.
Always verify the OE reference 2329025010, 23209F0010, 2975001580 stamped on your existing injector body before ordering; confirm the engine code and injector part number on the unit body both match your vehicle before unsealing the packaging. 23209-25010 needs no ECU calibration coding; no code transfer is required after fitting.
Technical Specifications
| Specification | Value |
|---|---|
| System Type | Denso Multi-Hole Direct Gasoline Fuel Injector |
| Operating PressureCore Spec | |
| Spray Pattern | Laser-drilled multi-hole fan pattern targeted at intake tumble flow |
| Fuel Rail Bolt Torque | 21 N·m (flanged holding bracket bolts) |
| High Pressure Pipe Torque | 32 N·m Flare Nut Connection |
| Coil Resistance | 1.7 - 2.1 Ω at 20°C (High-speed pulse driver circuit) |
| Common Fault Codes | P0300 (Random Misfire), P0301-P0304 (Cylinder Misfire), P0171 (System Too Lean) |
| Workshop Precaution | Replace blue Teflon combustion chamber seal ring using expansion mandrel and calibration collar |
Matched High-Pressure Fuel Pump (Fuel Circuit Assembly)
Operates on the same high-pressure rail circuit. When troubleshooting low rail pressure (DTC P0087), verify pump volumetric delivery before replacing injectors.
Installation Tips
- Depressurize Fuel System & Remove Air Intake Cleaner: Depressurize direct injection circuit via fuel pump circuit breaker or scan tool command. Remove engine acoustic cover and intake resonator ducting.
- Disconnect Injector Harness & High Pressure Fuel Pipe: Unplug electrical connectors from the direct injectors. Counter-hold the rail fitting and loosen the high pressure delivery pipe flare nuts (32 N·m).
- Extract Injectors & Fit New Teflon Sealing Rings: Carefully draw out direct injectors using slide hammer tool. Fit new Teflon combustion seals over injector tips and compress with sizing sleeve.
- Torque Fuel Rail Bolts & High Pressure Line Connections: Seat injectors into cylinder head ports. Torque fuel rail mounting bolts to 21 N·m. Tighten high pressure pipe flare nut to 32 N·m. Verify zero fuel leakage.
- Confirm part number 23209-25010 and the listed cross references against the vehicle’s EPC before ordering.
- Tighten the mounting/hold-down to 21 N·m, tighten the high-pressure line to 32 N·m, and observe the listed 200 bar system pressure.
- Confirm coding/adaptation and seal-reuse requirements against the vehicle’s EPC before installation.
Frequently Asked Questions
Which vehicles is part 23209-25010 listed to fit?
It is listed for Toyota Camry XV70 2.5L A25A-FKS 151kW (2018-2024), Toyota RAV4 XA50 2.5L A25A-FKS 150kW (2019-2024), and Lexus ES250 XZ10 2.5L A25A-FKS 150kW (2021-2024). This gasoline direct-injection injector is for Toyota/Lexus 2.0L & 2.5L Dynamic Force D-4S engines (A25A-FKS / A25A-FXS / M20A-FKS). Confirm the VIN-specific application against the vehicle’s EPC before ordering.
What diagnostic trouble codes are listed for this injector?
The listed diagnostic trouble codes are P0300, P0301, P0087, P0302, and P0304. Use these codes only as listed and confirm the diagnosis against the vehicle’s EPC instead of guessing.
Do I need coding/adaptation, and can I reuse the seals?
Coding/adaptation and seal-reuse requirements are not stated in the verified facts. Both must be confirmed against the vehicle’s EPC instead of guessing. The part number is 23209-25010.
How can I verify the old injector, and what is the expected service life?
Verify the old part against part number 23209-25010 and the listed cross references: 2320925010, 2329025010, 23209F0010, 2975001580, 0261500162, and 166001KT0A. Expected service life is not stated in the verified facts, so it must be confirmed against the vehicle’s EPC instead of guessing.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.