Catalog / DENSO / 23101-25010
DENSO

DENSO 23101-25010

View Specs
SolenoidGDI High-Pressure Fuel Pump (HPFP)Euro 6

High Pressure Fuel Pump Toyota Camry RAV4 Avalon Lexus ES 2.5L Dynamic Force A25A 23100 25011 GDP512

Reference data for DENSO 23101-25010 high-pressure fuel pump · OEM 23100-25011, GDP512, HM10052 · Application Toyota / Lexus 2.0L & 2.5L Dynamic Force D-4S (A25A-FKS / A25A-FXS / M20A-FKS)
OE REFERENCE23100-25011, GDP512, HM10052
CONTROL VALVE-
NOZZLE-
EMISSIONEuro 6
WARRANTY12 Months
01

Product Overview

The DENSO 23101-25010 is a precision automotive OE replacement component engineered specifically for Toyota 2.5L 4-Cylinder Dynamic Force D-4S (A25A-FKS / A25A-FXS) powertrains. Designed to deliver consistent calibration and factory-specified fuel atomization, this unit restores original throttle response, diagnostic rail pressure stability, and emission compliance.

Before You Order

Verify part number 23101-25010 and application fitment against your vehicle before ordering; confirm the pump and drive coupling match the original unit. Use new seals for installation and prime/check the fuel circuit before startup.

Technical references: OEM service documentation, manufacturer catalogs, and field repair data.
02

Compatible Injectors

Primary
OEM Ref
03

Vehicle & Engine Fitment

VehicleEngineYears
Toyota Camry (XV70)A25A-FKS / A25A-FXS / M20A-FKS2018-2024
Toyota RAV4 (XA50)A25A-FKS / A25A-FXS / M20A-FKS2019-2024
Lexus ES 250A25A-FKS / A25A-FXS / M20A-FKS2021-2024
04

Technical Specifications

SpecificationValue
part_number23101-25010
oem_reference23101-25010
manufacturerDENSO
system_typeHigh Pressure Fuel Pump
pressure_rating200 bar (2900 psi)
operating_temperature-40°C to +135°C
flange_mount_torque21 N-m (15 lb-ft)
high_pressure_line_torque30 N-m (22 lb-ft)
diagnostic_dtcP0087, P0088, P0171, P0172

Matched High-Pressure Fuel Injectors (Fuel Circuit Assembly)

Directly supplied by this high-pressure pump. Verify injector backleak balance if rail pressure fails to build during engine cranking.

DENSOExact Engine & Chassis Match
23209-24010
Gasoline Direct Injection (GDI) • 200 bar
🚙 Engine Code A25AFKS
Technical Specifications & Pinout
DENSOExact Engine & Chassis Match
23209-25010
Gasoline Direct Injection (GDI) • 200 bar
🚙 Engine Code A25AFKS
Technical Specifications & Pinout
05

Installation Tips

  1. Depressurize the fuel system completely before disconnecting any lines.
  2. Clean the pump mounting area and fuel line fittings to prevent contamination.
  3. Verify that part number 23101-25010 and the drive coupling match the engine application.
  4. Fit new seals to the high-pressure pump before installation.
  5. Install the pump and align its drive with the camshaft or timing drive.
  6. Reconnect the fuel lines and confirm all fittings are correctly seated.
  7. Prime the fuel circuit and check for leaks before starting the engine.
  8. Inspect the pump area for fuel leaks after the first run.
Tips & Warnings:
  • This high-pressure pump raises rail pressure and operates in a common-rail system at 200 bar.
  • Fit new seals, keep the fuel circuit clean, prime the system, and check for leaks before normal operation.
06

Frequently Asked Questions

QWill 23101-25010 fit my vehicle?

23101-25010 is listed for the Toyota and Lexus applications shown for this Dynamic Force petrol engine family; confirm your exact engine code and VIN against the EPC before ordering.

QWhat should I check before ordering?

Verify part number 23101-25010 against your VIN and EPC, confirm the engine family and fitment listing, and inspect the old pump, connector, and mounting area for damage.

QWhat are the symptoms of a failed unit?

Symptoms are not stated in the supplied product data; diagnose the vehicle with its workshop manual and confirm any fault codes before replacing 23101-25010.

QDoes the old unit need to be matched or adapted?

Matching or adaptation requirements are not stated in the supplied data; confirm coding or learn procedures for 23101-25010 in the vehicle's workshop manual or EPC before installation.

07

Diagnostic Trouble Codes & Fault Protocols

Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:

P0087Critical

Fuel Rail/System Pressure Too Low

P0088Critical

Fuel Rail/System Pressure Too High

P0089Critical

Fuel Pressure Regulator 1 Performance

P0191Critical

Fuel Rail Pressure Sensor 'A' Circuit Range/Performance

P0002High

Fuel Volume Regulator Control Circuit Range / Performance (VCV / IMV)

P0090High

Fuel Pressure Regulator 1 Control Circuit

08

Cross-Reference & Compatibility

Sister parts, same-platform variants, and known incompatibilities.

Technical Diagnostic & Service Protocols

Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.

COMMON RAIL WORKSHOP DIAGNOSTICS

Common Rail High-Pressure Pump Diagnostics Guide

Diagnose common rail high-pressure pump failure: suction vacuum, CP4 roller glitter, plunger wear, air ingress & P0087 hard start. Workshop bench testing.

Read Technical Protocol
COMMON RAIL WORKSHOP DIAGNOSTICS

Fuel Metering Valve (IMV/SCV) Diagnostics Guide

Diagnostic guide for common rail fuel metering valves (IMV/SCV/FCA/MPROP). Normally open vs closed, coil resistance, PWM duty cycle & P0088 / P0089 test.

Read Technical Protocol
OBD-II DIAGNOSTIC PROTOCOL

P0087 Low Rail Pressure Diagnosis Guide

Step-by-step workshop diagnostic protocol for OBD-II DTC P0087 (Fuel Rail Pressure Too Low). 5-stage troubleshooting tree: backleak testing, SCV valve, PRV valve, and high-pressure pump.

Read Technical Protocol
COMMON RAIL WORKSHOP DIAGNOSTICS

Rail Pressure Relief Valve Diagnostics Guide

Common rail pressure relief valve (PRV) testing guide. Diagnose hot start stalls, P0087 rail pressure loss, return line leakage & single vs 2-stage valves.

Read Technical Protocol