BOSCH 0261520448
High Pressure Fuel Pump Jeep Wrangler JL Grand Cherokee Alfa Romeo 2.0T Hurricane
68249673AA, 68249673AB, 68249673AC, 0261520449, 50051489, 50053438INTEGRATED PULSE-WIDTH MODULATED ELECTRIC INLET METERING VALVE-200 bar peak rail pressureProduct Overview
The 0261520448 is an industrial-grade genuine Tier-1 replacement engineered for FCA / Stellantis 2.0L GME T4 Hurricane Turbocharged Engine (EC1). Designed for high-precision Bosch High Pressure Direct Gasoline Injection 200 bar, it delivers factory calibration standards, OE cross-reference compatibility, and verified workshop reliability.
Always verify the OE reference 68249673AA, 68249673AB, 68249673AC, 50051489 stamped on your existing pump body before ordering; confirm the pump part number and drive coupling match your engine before unsealing the packaging. 0261520448 needs no ECU calibration coding; no code transfer is required after fitting.
Vehicle & Engine Fitment
| Vehicle | Engine | Years |
|---|---|---|
| Jeep Wrangler (JL) | Stellantis / FCA 2.0L GME T4 Hurricane Turbo (EC1 Jeep / Alfa Romeo) | 2018-2024 |
| Jeep Grand Cherokee | Stellantis / FCA 2.0L GME T4 Hurricane Turbo (EC1 Jeep / Alfa Romeo) | 2021-2024 |
| Alfa Romeo Giulia | Stellantis / FCA 2.0L GME T4 Hurricane Turbo (EC1 Jeep / Alfa Romeo) | 2017-2024 |
Technical Specifications
| Specification | Value |
|---|---|
| Pump Generation | Bosch HDP-5 Compact Gasoline Direct Injection Pump |
| Max Operating Rail PressureCore Spec | |
| Drive Mechanism | Camshaft Driven Roller Tappet Interface |
| Mounting Flange Fastener Torque | 10 N·m + 60°(TTY Bolts) |
| High Pressure Output Line Torque | 30 N·m Flare Nut |
| Control Valve ResistanceCore Spec | |
| Typical Diagnostic Trouble Code | P0087 (Fuel Rail Pressure Low - Limp Mode Entry) |
| Wear Item Inspection | Always check roller tappet face for scoring or flat spots during pump replacement |
| Operating PressureCore Spec |
Matched High-Pressure Fuel Injectors (Fuel Circuit Assembly)
Directly supplied by this high-pressure pump. Verify injector backleak balance if rail pressure fails to build during engine cranking.
Installation Tips
- Depressurize Fuel System Safely: Disconnect low pressure tank pump power connector. Crank engine 10 seconds. Check live scan data confirming low pressure fuel drops below 5 bar.
- Inspect & Replace Roller Tappet: Extract roller lifter from cylinder head bore. Inspect roller surface and internal bearing for scoring. Replace if surface DLC coating shows signs of wear.
- Set Camshaft to Lowest Base Circle: Rotate crankshaft until driving cam lobe is at lowest lift. This minimizes spring resistance when seating new pump onto mounting flange.
- Torque Mounting Bolts with Angle: Fit new O-ring lubricated with clean engine oil. Snug bolts down evenly, then torque to 10 N·m plus an additional 60-degree rotation.
- Secure High Pressure Hard Line: Line up high pressure steel line. Hand thread fitting to prevent cross-threading, then torque to 30 N·m with flare wrench.
- Torque the mounting/hold-down to 10 N·m + 60°.
- Tighten the high-pressure line to 30 N·m.
- Confirm fitment for Jeep Wrangler (JL) (2018-2024), Jeep Grand Cherokee (2021-2024), and Alfa Romeo Giulia (2017-2024) before installation.
Frequently Asked Questions
Why does Jeep Wrangler 2.0T lose power and enter limp mode?
When the Bosch 0261520448 high-pressure pump's internal metering valve sticks or roller tappet wears out, rail pressure collapses under heavy boost. The PCM detects fuel starvation, stores P0087, and limits boost to protect against lean detonation.
Should I replace the roller tappet with the fuel pump?
Yes, absolutely. A worn roller tappet will destroy the plunger foot of a brand-new high-pressure fuel pump within hundreds of miles. Both should always be replaced as a matched pair.
What is the mounting torque procedure?
The mounting flange bolts are torque-to-yield. Tighten both bolts evenly to 10 N·m, then turn an additional 60°. The high-pressure pipe nut is torqued to 30 N·m.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.