BOSCH 68318470AA
High Pressure Fuel Injector Jeep Wrangler JL Grand Cherokee Alfa 2.0L Hurricane 0261500448
68318470AB, 0261500448, 0261500449, 50052349MULTI-HOLE LASER DRILLED SOLENOID ACTUATED DIRECT INJECTION NOZZLE-200 bar peak rail pressureProduct Overview
The Bosch 68318470AA (Bosch 0261500448) is a Bosch HDEV5 multi-hole direct gasoline injector for the Stellantis / FCA 2.0L GME T4 Hurricane turbo engine. Applications include the Jeep Wrangler JL (2018-2024), Grand Cherokee 2.0T (2022-2024) and Alfa Romeo Giulia 2.0L (2017-2024). It operates at up to 200 bar (20 MPa / 2900 psi) with an asymmetrical 6-orifice spray engineered for deep chamber penetration; coil resistance is 1.4-1.8 Ω at 20°C. Rail holding bracket fasteners take 12 N·m and the high-pressure pipe flare nut 27 N·m. Common codes listed are P0300, P0301-P0304 and P0172. Install new Teflon combustion tip seals with an expanding mandrel and sizing collar.
Always verify the OE reference 68318470AB, 50052349 stamped on your existing injector body before ordering; confirm the engine code and injector part number on the unit body both match your vehicle before unsealing the packaging. 68318470AA needs no ECU calibration coding; no code transfer is required after fitting.
Vehicle & Engine Fitment
| Vehicle | Engine | Years |
|---|---|---|
| Jeep Wrangler (JL) | 2.0L GME T4 Hurricane 200kW | 2018-2024 |
| Jeep Grand Cherokee | 2.0L GME T4 Hybrid 280kW | 2022-2024 |
| Alfa Romeo Giulia | 2.0L GME MultiAir 206kW | 2017-2024 |
Technical Specifications
| Specification | Value |
|---|---|
| System Type | Bosch HDEV5 Multi-Hole Direct Gasoline Fuel Injector |
| Operating PressureCore Spec | |
| Spray Pattern | Asymmetrical 6-orifice pattern engineered for deep chamber penetration |
| Fuel Rail Bolt Torque | 12 N·m (holding bracket fasteners) |
| High Pressure Pipe Torque | 27 N·m Flare Nut Connection |
| Coil Resistance | 1.4 - 1.8 Ω at 20°C (High performance peak-and-hold excitation) |
| Common Fault Codes | P0300 (Random Misfire), P0301-P0304 (Cylinder Misfire), P0172 (Fuel System Rich Bank 1) |
| Workshop Precaution | Install new Teflon combustion tip seals using expanding mandrel and sizing collar |
Matched High-Pressure Fuel Pump (Fuel Circuit Assembly)
Operates on the same high-pressure rail circuit. When troubleshooting low rail pressure (DTC P0087), verify pump volumetric delivery before replacing injectors.
Installation Tips
- Relieve Fuel System Residual Pressure: Depressurize high pressure fuel system using diagnostic scan tool or fuel pump relay isolation. Disconnect battery negative terminal.
- Disconnect Wiring Harness & Fuel Rail Hard Lines: Unclip wiring harness from all four injectors. Loosen the high pressure fuel crossover pipe (27 N·m) and unbolt fuel rail fasteners (12 N·m).
- Extract Injectors & Fit New Teflon Chamber Seals: Use slide hammer tool to extract direct injectors from cylinder head. Install new blue Teflon seals using calibration guide sleeves.
- Torque Rail Fasteners & Verify High Pressure Seal: Seat injectors into cylinder ports. Torque rail bolts to 12 N·m. Tighten steel high pressure line to 27 N·m. Prime fuel system and check for leaks.
- Verify the part number and exact vehicle application against the vehicle's EPC before removal or ordering.
- Tighten the injector mounting/hold-down fasteners to 12 N·m.
- Tighten the high-pressure line to 27 N·m.
Frequently Asked Questions
Will part 68318470AA fit my vehicle?
Part 68318470AA is listed for the Jeep Wrangler (JL) 2.0L GME T4 Hurricane 200kW (2018-2024), Jeep Grand Cherokee 2.0L GME T4 Hybrid 280kW (2022-2024), and Alfa Romeo Giulia 2.0L GME MultiAir 206kW (2017-2024). It is a gasoline direct-injection injector for the Stellantis/FCA 2.0L GME T4 Hurricane Turbo (EC1 Jeep / Alfa Romeo) engine family. Confirm the exact vehicle application against the vehicle's EPC before ordering or installing.
What mounting and high-pressure line torques are specified?
The mounting/hold-down torque is 12 N·m, and the high-pressure line torque is 27 N·m. The system pressure is 200 bar. Use these values only for the listed injector application and confirm any additional procedure against the vehicle's EPC.
How can I verify the old part before ordering?
Compare the old unit's part number with 68318470AA and the listed cross references: 68318470AB, 0261500448, 0261500449, 50052349, and 0261520448. Also confirm the engine family and vehicle fitment against the vehicle's EPC.
Which diagnostic trouble codes are listed for this injector?
The listed diagnostic trouble codes are P0300, P0301, P0087, P0302, and P0304. The supplied facts do not state a diagnostic workflow or additional symptoms, so confirm diagnosis against the vehicle's EPC/service information instead of guessing.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.