Catalog / DELPHI / EJBR04001D
DELPHI

Delphi EJBR04001D

View Specs
SolenoidDelphi Common Rail SystemEuro 4

common rail injector

Reference data for DELPHI EJBR04001D common rail injector · OEM 8200567290, 166001137R, 16600-00Q0J · Application K9K, K9K 766, K9K 768
OE REFERENCE8200567290, 166001137R, 16600-00Q0J
CONTROL VALVE28239294
NOZZLEL163PRD
EMISSIONEuro 4
WARRANTY12 Months
01

Product Overview

WORKSHOP NOTICEECU Calibration / IMA Coding Required

This injector requires 6-8 digit calibration code programming (IMA / QR code) into the vehicle ECU (using Bosch KTS, Lexia/Diagbox or equivalent diagnostic equipment) following replacement to balance cylinder fuel delivery and prevent DTC P0300 misfire codes.

The Delphi EJBR04001D is an authentic common rail diesel injector calibrated for Dacia Duster I and K9K engine applications. Operating at an engineered rail pressure of 1600 bar, this solenoid assembly features the precision 28239294 control valve and L163PRD nozzle. Mandatory ECU calibration requires programming the cylinder-specific C2i 16-digit hexadecimal code into the engine control unit to establish smooth delivery balance and Euro 4 emissions compliance. Typical failure symptoms include control valve erosion causing excessive back-leakage, rail pressure deficit (DTC P0087), and erratic cold-start idling. Overhauling necessitates clean room assembly and genuine replacement seals.

Before You Order

Verify Delphi C2i/C3i calibration code and OEM cross reference before installation.

Technical references: OEM service documentation, manufacturer catalogs, and field repair data.
02

Compatible Injectors

OEM Ref
OE Nozzle
03

Vehicle & Engine Fitment

VehicleEngineYears
Dacia Duster I1.5 dCi (K9K 766)2010-2018
Dacia Sandero I1.5 dCi (K9K 768)2008-2012
Renault Kangoo II1.5 dCi (K9K 766)2008-2016
04

Technical Specifications

SpecificationValue
SKUEJBR04001D
BrandDELPHI
Fuel SystemCommon Rail (Delphi DFI)
Operating PressureCore Spec
Control ValveCore Spec
🔗 Shared Valve (40 assemblies):EJBR03601DEJBR03701DEJBR04401DEJBR04501D
Nozzle CodeCore Spec
Hold Down Torque30 N·m
High-Pressure Line Torque28 N·m
Coding RequiredYes
Emission StandardEuro 4
05

Installation Tips

  1. Depressurize And Clean: Depressurize the fuel system and isolate it according to the workshop procedure, then clean the surrounding area of the injector bore and the cylinder head before opening any connection.
  2. Disconnect Connections: Disconnect the electrical connector and the spill/return connection from the injector, then plug or cover all exposed ports and fittings to prevent dirt ingress.
  3. Remove High-Pressure Line: Remove the high-pressure line from the injector inlet, cap or plug the line and the injector port immediately, and keep the line ends clean.
  4. Extract Old Unit: Release and remove the hold-down device, extract the old injector from the bore, and remove any old seals without damaging the cylinder head or injector bore.
  5. Clean Bore And Seat: Clean the injector bore and seat in the cylinder head, remove carbon and debris, inspect the sealing surfaces, and keep the area covered until the new injector is ready.
  6. Fit Seals And Seat Unit: Fit new seals to the injector, seat the unit in the injector bore, tighten the hold-down to 30 N·m, then reconnect the high-pressure line and tighten it to 28 N·m; reconnect the electrical connector and spill connection.
  7. Calibration Coding: Record the 20-digit Delphi C2i/C3i calibration code and program it with a suitable diagnostic tool.
  8. Leak-Check And Start-Up: Leak-check the high-pressure line and injector connections, start the engine, and inspect for fuel leaks and abnormal running; stop the engine if any leak is found.
Tips & Warnings:
  • Tighten the injector mounting/hold-down to 30 N·m.
  • Tighten the high-pressure line to 28 N·m.
  • Confirm EJBR04001D and the listed cross references against the vehicle's EPC before fitting.
06

Frequently Asked Questions

QWhich vehicles does this EJBR04001D common-rail diesel injector fit?

It fits Dacia Duster I 1.5 dCi (K9K 766) from 2010-2018, Dacia Sandero I 1.5 dCi (K9K 768) from 2008-2012, and Renault Kangoo II 1.5 dCi (K9K 766) from 2008-2016. The listed engine family is K9K, K9K 766, K9K 768. Confirm exact vehicle fitment against the vehicle's EPC before ordering.

QWhat diagnostic trouble codes are listed for this injector?

The listed diagnostic trouble codes are P0300, P0087, P0304, P0201, and P0204. No symptom list or injector test procedure is stated in the verified facts, so confirm the diagnosis and fitment against the vehicle's EPC before replacing the injector.

QDoes this injector require coding or adaptation after installation?

Coding or adaptation requirements are not stated in the verified facts. Confirm the requirement against the vehicle's EPC before installation and do not guess.

QHow can I verify the old injector before ordering a replacement?

Verify the old unit by matching part number EJBR04001D and the listed cross references: 28232248, 8200567290, 166001137R, and 16600-00Q0J. Confirm the engine family and vehicle fitment against the vehicle's EPC; do not guess if the numbers do not match.

07

Diagnostic Trouble Codes & Fault Protocols

Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:

P0087Critical

Fuel Rail/System Pressure Too Low

P0201High

Injector Circuit Malfunction - Cylinder 1

P0202High

Cylinder 2 Injector Circuit Malfunction / Open Circuit

P0203High

Cylinder 3 Injector Circuit Malfunction / Open Circuit

P0204High

Cylinder 4 Injector Circuit Malfunction / Open Circuit

P0300High

Random or Multiple Cylinder Misfire Detected

08

Cross-Reference & Compatibility

Sister parts, same-platform variants, and known incompatibilities.

Technical Diagnostic & Service Protocols

Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.

Workshop Diagnostic Protocol

Common Rail Injector Back-Leak Testing Guide

Common rail injector backleak test protocol. Graduated cylinder setup, warm idle & cranking limits in mL/min, control valve wear & P0087 diagnosis.

Read Technical Protocol
ECU Calibration Protocol

Bosch IMA Injector Coding & Location Guide

Bosch common rail injector IMA coding guide. Locate laser-etched 6-9 digit codes on body, ECU OBD2 adaptation steps & test bench calibration facts.

Read Technical Protocol
COMMON RAIL DIESEL WORKSHOP SOP

Stuck Injector Removal & Carbon Cleaning SOP | FuelPartsDB

Comprehensive workshop SOP for stuck diesel injector removal, pneumatic vibro-puller extraction, carbon solvent softening, and seat reaming without damage.

Read Technical Protocol
ASSEMBLY & INSTALLATION PROTOCOL

Diesel Injector Torque Specs & TTY Angles Guide

Common rail diesel injector hold-down bolt torque specs, TTY angles & pipe unions. Covers Bosch, Detroit DD13, Cummins & VAG 2.0 TDI workshop data in Nm.

Read Technical Protocol